ZincT

Thanks for pointing that out Michael. Nice one Melda!

Just received an email from T&S with a voucher so check your email for yours. Don't know if voucher codes are different per email but suspect they may be. Looking to get a TH-U expansion for around 6 GBP combining voucher with my loyalty points if it's allowed.

I got the same code Zo!

Thanks ensconced. Great review of TH-U by Craig Anderton. Looking forward to his ReValver review. Also found the discussion about the Transient Tamer a few posts down from the review interesting.

That sounds like a challenge! I will set aside 20 minutes tomorrow and let you know how I get on. The thing is that you can load a preset, press generate and voilà, a masterpiece. However, I would like to have more say in what it generates and I haven't completely mastered what all of colored blobs do.

Hey Mesh, I bought it but haven't used it yet in a composition. It looks to have quite a few complexities and consequently the learning curve to get the most out of it is probably longer than something like InstaChord/InstaScale/Riffer, but then again it can do more. Anyway, I'm far too busy with GAS ? I'll let you know when I use it in earnest!

I was lucky enough to get the excellent Recordingsoftware deal but after seeing some of the later posts in this thread I checked my iZotope account and found that I upgraded to MPS 2.1 on 5th August. So with?? I contacted iZotope support and they have now supplied me with a free upgrade! Way to go iZotope! I now have a spare MPS 3 upgrade for sale and I am only looking to recoup my costs so PM me if you are interested. I checked with support and it does include Nimbus, R4 and the Groove 3 sub. Melodyne was included with the MPS 2.1 upgrade so is not included in this. First come first served. EDIT: It's sold.

Thanks Larry. For anyone wondering it's a small 9.6Mb download which seems to just update the engine. The 10.4Gb of samples remains the same.

This has been happening for while and not just with the latest versions of Melodyne and CbB (both of which I am using). I just hadn't got around to raising the issue yet. Not sure whether it's an issue with Melodyne or CbB. So within CbB on an audio track I select the audio for editing then hit Ctrl-M to open it in Melodyne. However, in Melodyne it only displays a few bars at the start of the track and you cannot scroll across to the part where the audio is (the range of the scroll bar is not sufficient). You then have to close the Melodyne editor window and open it again. Then all is fine and the correct part of audio is displayed. Is anyone else getting this?

Another update to fix a few issues with the last one... Build 25.09.0.70 hotfix Fade In doesn’t respond to menu changes 'Left Click Rewinds to Clip Start in Lanes' doesn't work if clip start is off screen Basic lens persists the Tungsten theme Run Bandlab Assistant or CbB to update. Thanks Bakers!

I have the full version of Jamstix but I get a lot of problems with BitDefender thinking Jamstix Manager is Ransomware and blocking it. I don't know if you use BD but if so that might be the issue. Try adding an exception to Ransomware Remediation (works ok for me until the next update of Jamstix Mgr grrr). I used to use Kaspersky without any issues but moved to BD after all the scare about using Russian software. Anyway, I am so fed up with all of the false positives from BD that I have just purchased a Kaspersky license and plan to move back to it once my BD license expires.

The official post on the forum is up now...

I think most of it applies to the initial 2019.09 build Grem. The new update is Build 25.09.0.68 hotfix so I assume only this part applies... Build 25.09.0.68 hotfix New Options > Click Behavior > Transport Seeking Stops Playback option, which specifies if playback should stop when changing the timeline position during playback U-He plug-ins crash on opening projects in version 2019.09 Waveform preview draws unexpectedly in version 2019.09 Bus waveform preview could stop drawing when hidden buses are present Can no longer open Piano Roll view by double-clicking a selected MIDI clip Fast consecutive seeking on timeline can cause hang with projects that contain video Envelopes are not being moved with comp clip, but are removed instead Metronome count-in throws off timekeeping in VST plug-ins like EZdrummer Crash when switching between effects and instruments in the Plug-in Browser if plug-ins are removed from the active layout in Cakewalk Plug-in Manager Plug-in Browser doesn't always reflect changes made in the Cakewalk Plug-in Manager Crash when dragging Loop Start marker past 1:01:000 with Snap to Grid disabled Quick grouping should be disabled if there is no track selection Incorrect track strip control layout in Console view when WAI Display is enabled Numerous issues with clip context Crossfade menus Selected channel strips widen unexpectedly in the Console view if ProChannel display states aren't uniform Data is not imported to the selected Take lane when imported via the Clips pane context menu Importing audio to a Take lane resets the current lane focus to the topmost lane Improved dropout reason code reporting Restored many missing 'Learn More' buttons in the Help Module

Thanks Larry. All updated no problems (hotfix 68) and I'm still getting the super fast startup that the first 2019.09 build introduced for me (used to take around 1 minute to start and now takes 3 seconds).

Agreed, very impressive. No wonder they normally cost so much. Very deep and loads of tweakability. Found these video reviews useful... https://youtu.be/P6SypKXF7zs https://youtu.be/bwARuLeEZ_o

Thanks Larry. Tempted by the Phaser as I missed it when it was on sale before and it's a recreation of a studio classic. https://www.youtube.com/watch?v=EGRsOJ9lTCE Any thoughts from any owners?

Same for me Larry. I emailed iZotope yesterday about the missing Groove3 and Melodyne serials and they emailed them to me today. My iZotope login is also working again today. ? Amazing deal despite the hassle getting all the serials. Now to check out Eli Krantzberg's take on O9A...

I haven't installed these yet so thanks for saving me the bother of doing so. Let's hope it's not a sign of things to come for the plugin collective.

I have to say that Recordingsoftware have been very helpful in trying to resolve these issues which seem to result from iZotope not being fully geared up for release. Anyway, Recordingsoftware just sent me an email with a workaround to obtain R4 and Nimbus. Just a heads up to anyone else who receives these...ignore the instructions to register them on the iZotope product portal. These are iLok Manager serials so use that instead and they will work fine. ??‍♂️ Now all I need to sort out is redeeming the Groove3 and Melodyne licenses but I haven't heard back from iZotope yet.

Thanks for the information Larry. I only received the MPS 3 serial so I will get back to Recordingsoftware about the Nimbus/R4 serials. Did you receive yours @mcmd ?

How did you get Nimbus and R4? They don't appear on the portal. I found a download link here --> https://www.izotope.com/en/products/downloads/suites.html ...but I suspect they will require authorisation and I haven't received any other serials. It's all very shambolic on iZotope's part; like they weren't properly geared up for launch but were in a hurry to do so before we spent our money on imminent BF deals ??‍♂️ Oh well, here goes another email to iZotope support. Feel for you guys who paid more yesterday (been there, done that before). ?

Same here, thanks @Tomgu Update: O9A installed and authorised okay but I cannot get the Melodyne or the Groove3 thing to work (probably because of below..). I notice that they have updated their website look and feel but now I cannot login using my existing username and password (worked yesterday). After resetting the password it still won't let me login so I have sent a support email.

It's like paying for Groove3 1 year sub and everything else is free!

They emailed me a $25 voucher yesterday and another one today. The email gives the impression you can only use today's voucher. Today's email said... A New $25 Code For You! As some of our users have experienced issues with the limited $25 codes we sent out earlier this week, we have decided to send everybody a new $25 code today!