David Baay

Welcome to the forum. Kind of an odd problem to have, but will try to help. - What sound source (hardware synth module/keyboard or soft synth), and what keyboard controller model? - USB MIDI direct from the controller, or 5-pin DIN connections to a MIDI interface? - At what point does it stop working, and is it just on playback or also while rehearsing/recording? - Does it happen in a new project? - Check the Event List view or Controller pane in the Piano Roll View to verify sustain on/off controller events are present where expected.

Hmmm... that's a new one on me. Some typical things to check/try: - Are you using MME driver mode (MIDI > Playback and Recording, not Audio), - Any chance the keyboard was moved to a different USB port at some point? - Is it in a USB2 port? - Ar the ports assigned as a Control Ssurface when not intended? - Any onboard MIDI devices or other oddness shown in Device Manager? - Disable anti-virus. or exclude driver paths. - Rename TTSSEQ.INI and have CbB build a new one.

Are the keyboard MIDI ports enabled in Preferences > MIDI > Devices? Is it working if the keyboard is powered up before CbB is launched?

No, it's not normal for this to not be working. It's working as usual with my MIDI interface in the current release. That said, I have occasionally seen auto-detection fail to display the pop-up, but I'm inclined to lay the blame on Windows not signaling the driver load properly.

Going back to this earlier statement and the related screenshot, I'm gathering you recorded a mono input to a stereo track to begin with. This isn't causing the problem per se but it complicates the understanding of how FX will behave. Ideally you should first bounce that track to Split Mono with no FX active, delete the empty right-channel track, and start over with the remaining mono clip on a mono track with FX moved to that track.

What FX are on the Master, and are there any Sends on the track in question to other buses? Clearly some FX downstream of the track is adding right-channel information. It looks like an exact copy of the left channel which suggests maybe the FX is mono-only so the same signal gets sent to both ouput channels of the bus. You'd have to hard-pan that bus to get the desired result. It might help to understand what the ultimate goal is. Are you exporting stems to be mixed and mastered in another program/environment? Normally you would have everything routed to some intermediate bus and export those buses, bypassing any FX on the Master. But you'll still have the issue of mono-only FX producing a centered output.

If possible, share a project/MIDI file (even just one track with a full-length clip that is not truncating as intended), letting us know exactly where you're trying to end it. EDIT: Missed that bouncing to clips resolved it.

This might be related to an issue that was brought up a while ago that nodes don't get included in the selection when the view has to auto-scroll as you're dragging to select off-screen nodes. All nodes have to be already visible when you start the selection. I haven't checked whether this might have been fixed already.

+1 Is lasso (right-click and drag) not working for this?

I am seeing Patch Points there despite the option being named 'Send to Existing Bus'. Thumbs up on the rest of it.

Make sure you have Non-Destuctive MIDI Editing un-checked in Editing preferences.

Should not happen if you have 'Re-use Existing Lane' option or Re-use... Unless Takes Overlap' option selected in Record Options since Overwrite is theoretically eliminating the overlap in the punch region befrore recording starts. But there may be scenarios (certain combinations of tempo and punch points) where CbB thinks there's still an overlap and only the first option would work correctly.

Cool.

Good point, but it only happens when Exclusive Solo is engaged.

Confirmed. And the musical value is ignored in favor of the Landmarks as shown in your video. I also saw some other odd behavior where it nudged by random small amounts (4 ticks, 32-ticks) when the clip start was between 1:01:000 and the first marker, but I can't reproduce it consistently

CbB is running seamlessly on a new Dell Inspiron laptop with Win11 pre-installed, using WASAPI with onboard audio. I won't be upgrading my 7-year old desktop DAW that came with Win10; I'll just get a new machine with Win11 (or 12!) when the time comes. Only one Win10 update caused any issue for me, and it's minor: I now have to power up my old MOTU MIDI interface after the O/S loads or the driver won't load properly.

That's Solo Override. I has no effect until you solo some other track; then it prevents the Override-enabled track(s) from being silenced.

Just confirmed the issue with Event Editor and Exclusive solo of an Instrument track at the same time as sjoens was posting. Never had all three of these conditions come together I guess.

Interesting, My experience with hardware mixers is pretty limited and I hadn't ever encountered that. 'gate every FX in the signal path' is kind of an odd way of describing what's happening. You're gating the signal (from a clip in CbB or from a tape in the analog world), and that gated signal is passed on to the next effect if there is one. So all the FX see an altered signal, but their behavior isn't directly affected by the gate except to the extent that they might respond differently to the altered attacks and decays in the signal.

I meant only to compare FX Bin signal flow to hardware inserts.

Gave it a go both before and after upgrading Melodyne Editor 4 to 5 that I hadn't yet installed, and could not reproduce a problem. I also tried with Ripple Edit - All engaged and that didn't cause a problem despite all the clips becoming selected when I clicked on one. Might need someone to share a problematic project to see if it's project-specific.

I start pretty much all my projects at 1:01:000 unless they start with a partial 'pick-up' measure, and have only ever encountered a few specific issues with external hardware synths needing time to process a patch change or MIDI tracks with a positive (early) Time Offset entered. It shouldn't be a problem in general. The OP mentioned using the Arranger which makes me think this might be related ('Select Events with Sections' option):

Hey, Chuck, I'm not understanding the distinction you're making between the way CbB handles Insert FX and the way a hardware mixer handles them. Plugins in FX bins are acting as a series of Insert effects (i.e. the entire signal goes through each FX in turn before being returned to continue on it's way to the track's output) as opposed to a Send FX (i.e. a copy of the signal is sent on a parallel path to a bus with the FX on it before re-joining the track's output on the Master bus). If a hardware mixer has multiple insert jacks per channel, those inserts operate in series just like CbB's FX bin. If the mixer has only one insert per channel, you have to connect multiple FX in series externally (or use a multi-FX processor).

John mentioned this might be due to having Ripple Edit - All engaged; has anyone checked that?

Like many users with higher-end digital pianos, I often use hardware piano sounds in preference to VSTis. I will respectfully disagree with John and say that the best hardware is generally superior to the best plugins in this realm, and the Yamaha NU1 is certainly among the best. Are you direct-monitoring the Yamaha's output or input-monitoring back through an audio track in CbB and out to a monitoring system? If the latter, possibly you are recording both MIDI and Audio, and getting phasy sound from the layering of the real-time MIDI driven output with the recorded audio on playback. SOP for working with a hardware piano/synth is to record only the MIDI initially, edit it as necessary to perfect the performance, and then arm an audio track to record it and mute/archive the MIDI track after recording the audio. Most of the other setup issues that would cause echoing (e.g. the piano transmitting on two channels or connected via both USB and DIN MIDI ports) would manifest while playing live as well as on playback. In any case, make sure you have the Input of the MIDI track set to a specific port and MIDI channel of the Yamaha to avoid recording duplicate MIDI events.