Jump to content

Pathfinder

Members
  • Posts

    426
  • Joined

  • Last visited

Posts posted by Pathfinder

  1. 14 minutes ago, scook said:

    Probably not a registry issue as the only thing contained in the registry is the layout path which is set in Preferences > File > Folder Locations.

    Could it be the layout contains a mix of FX and synths plug-ins?

    While the plug-in manager allows creating layouts containing both, the DAW does not support it.

    I'll check that now. Thanks Scook.............

  2. I deleted and then rebuilt them all. Still that screenshot remains the same. The vst Instruments_01052022 is NO longer dated the 5th. I rebuilt and renamed it to todays date? Still nothing changes. I will attempt to edit the register I guess. I truly do NOT understand. This is why I get so frustrated. This is crazy.

  3. First, full disclosure, MY memory is SHOT-no disease, that I have been told of anyway, VA takes care of my Medical neeeds. Just, cannot remember so many SIMPLE CW things. 

    I mention this because i have posted some very basic (sometimes ridiculous) CW questions even though I have used CW since the 90's. I did a new install, new PC, etc, etc. I cannot remember so many simple key things. I have been going thru ALL the tutorials I can find on here and youtube, hopefully some will sink in. Sorry for the rant. I am trying guys and gals!

    Here is the present one: In the Manage layouts pict I attached you can see checkmark next to VST Instruments with a date. But I have 3 o these saved. I do not remember how to get all three to show up in the menu like the VST Instruments 01052002? Hope that explains it well enough.

    I have checked and re-checked-I definitely have 3 self made menus saved the same place as the VST Instrum,ents lyout. Nothing is compressed, etc.

    Thanks so much for your patience and help
     

     

    Screenshot Manage Layouts.png

  4. 1 minute ago, scook said:

    select a plug-in

    OK found that, was just about to post back. Each vst has load\save preset etc. But of course all mine are invalid and will not load. Never mind. I am very close to giving up but I guess I will have to re-create all (it's many) of the presets I have created over the years. 

     

    When you folks are tired of me I will understand because I am tired of me.

  5. I have my old one from before new install. All my preset saves are there. But I cannot find a way to SET the path. In plug in manager all options are grayed out. I thought perhaps I needed to CREATE a new preset and save it, so I did. NOTHING. In the screenshot I have EZDRUMMER 2 highlighted but as you can see-all gray. I searched the register and could find nothing. 

    Do I have to create a path in the register? Seems crazy.

    It is amazing how much BASIC stuff you forget when you use a program for 3 decades.

    Thanks

    Screenshot 2022-01-08 220839.png

  6. 2 hours ago, scook said:

    I started with an advanced install selecting minimal install of X2 for V-Vocal and plug-ins not in X3 followed with an advanced install of X3 for plug-ins not in Platinum and a full install of Platinum.

    Also check out my post above for details on installing legacy products.

    Thanks Scook. Already did. Great stuff. Found all my Sonars and cam across this file. Remember this? I am sorry I do not remember who did this. Wasn't me of course.

    Weird that I cannot open it here?

     

    Sonar what version had what_GREAT.xlsx

  7. 1 hour ago, Bristol_Jonesey said:

    By installing Platinum first you will get all the extra goodies that you paid for. CbB doesn't ship with very much by way of plugins

    I understand that but I am not ready to go thru the process of VSTs like Toontrack, Izotope and countless others. If I find I am sorely missing some of them I may reconsider but it would take an awful lot for that to happen.

     

    EDIT: If I KNEW for sure that I would NOT have to reinstall all samples and VSTS I would have no problem do it correctly.

    So, does uninstalling CWbyBL mess with any of the installed VSTS or samples and libraries?  I would hate to make ANOTHER mistake. Thanks

  8. So finally decided new build deserved NEW Win 10x64 install. All done.

    Now I like all samples and cakewalk content on my E:\Sample Drive. It already exists with everything o I guess that will ot help.

    My question is: Doing a custom install of cakewalk when I get to Cakewalk Content location can I just browse to and select my E drive?  Used mlink, etc before to do this.

    Wish there was someway to use what is already in the cw content folder on the E dive but I imagine that's not possible.

    Thanks

  9. So. finally almost done with this new build, thanks to help from this forum. I did research about partioning nvme m.2 drives and got mostly mixed reviews-leaning towards the difference in speed will be nanoseconds maybe.

    My comcern is NOT speed.  I need to install a clean(or migrate win 10x64 for now. Currently (not in picture, OS is on pretty old Samsung ssd 250 GB-SATA 2.5".
    Disk #3, partitoned 50/50 is where I hoped to put OS on 1 partition and Audio recordings o the other.  Is this OK? Dumb? Not a good idea because?

    I have one empty nvme m.2 slot but it's partaily UNDER the graphics card. I can get one in there but NO ROOM for any type of heatsing? So? I do have a new Samsung 500GB 980 nvme m.2 sitting on my desk. I did think about a Startech adapter to use the spare 980 in a PCIe slot-might even be able to put a small heatsink on it.

    I apologiz for my long winded post but I am almost there and really would like to be done. I hope I am not asking too many questions!
    OK I don't really need the games (well Tomb Raider) but I don't see where that makes a difference here.
     I also am aware that the OS drive should be GPT not MBR, but I have not figured where it's going yet so I left it as MBR for now-

    EDIT: I completely understand (HONEST) if I do not get a reply, not your everyday question and probably confusing somewhat due to my trying to explain. 🙂 

    Thanks
     

    AOMEI PA.PNG

  10. Use to be a fan above the desk, on the ceiling. Didn't work and didn't need it. So I already have th AC wiring and a solid brace to studs. Just wondering about EMI or other interference. Need I worry about that?

    If so what type of light should I get? I was thinking hanging  type is easiest but could do track lighting flush to ceiling or fixture flush.

    I do recall concerns of interference from LEDs, if that is a thing when on ceiling?

     

    Thanks so much gang

  11. 10 minutes ago, scook said:

    That is not "C:\Cakewalk Content" that is "%appdata%\Cakewalk\Cakewalk Core" (AKA the user directory). There are paths pointing to both but the bulk of the data is in "Cakewalk Content", by default.

    The default paths should look something like this from http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=0x201D9

    Dialogs2.062.1.png

     

    They don't but I can change them. They are ALL pointing to the same place? That is weird because like I said before I did the new build (2 days ago) everything in cw worked perfectly. iirc when I first did the mlink stuff years ago I did have to change some paths. Thanks so much for your help as always.
    I I do not get it tomorrow I'll post back.

  12. all my paths in folder locations are pointing here : C:\Users\Frankl\AppData\Roaming\Cakewalk\Cakewalk Core

    I never touched them All I did was move the sample folder which contains the cakewalk content folder to a new nvme m.2, nothing else.??? I use CW everyday, so I don't get the changes

     

×
×
  • Create New...