icu81b4 Posted December 13 Share Posted December 13 1 hour ago, David Baay said: I coudn't reproduce this. A few questions: Is it audible or just a waveform drawing error? Have you seen more than one instance of this? Is it a single clip in a single-lane track? Was the range of the lowered gain segment modified after setting the level? Hi David, - Thanks for responding 1. Is it audible or just a waveform drawing error? It's audible 2. Have you seen more than one instance of this? Yes, Within the same Project. 3. Is it a single clip in a single-lane track? It occurs in both single and stereo tracks 4. Was the range of the lowered gain segment modified after setting the level? No. But getting back to Question #2 I haven't been able to re-create this in other projects. and even more strange is that in earlier versions of this project - it seems fine, So It may be that this version of the project is corrupt in some way. which is a tad annoying as I need to complete this by the 20th. Looks like I'm going to have to go back to earlier versions and start over! Link to comment Share on other sites More sharing options...
Tim Elmore Posted December 13 Share Posted December 13 About the waveform not responding properly to the clip gain envelope: Are the responding and non-responding parts in separate clips? I have occasionally had a clip lose the ability to respond to the clip gain envelope while other clips continue to respond just fine. For me, this is usually fixed by doing the following: 1. Copy the non-responding clip to an empty space in the track. 2. Delete the clip copy that was just made. This strange fix has worked for me a number of times. It is as though the clip gain envelope gets "unlinked" from the clip, and then gets restored when the clip is copied somewhere else. I have never reproduced the problem at will. It appears to occur randomly, and only once in a great while. This may or may not be what you are experiencing, but it might be worth a try. 1 Link to comment Share on other sites More sharing options...
icu81b4 Posted December 13 Share Posted December 13 @Tim Elmore Hi, Thanks for the response. Re ... Are the responding and non-responding parts in separate clips? Nope, The entire track is a single clip. Link to comment Share on other sites More sharing options...
David Baay Posted December 14 Share Posted December 14 6 hours ago, icu81b4 said: I haven't been able to re-create this in other projects. and even more strange is that in earlier versions of this project - it seems fine, So It may be that this version of the project is corrupt in some way. Sorry, I have no really good ideas why this might be happening other than that. But if it's failing in just a few specific places, you might try splitting those clips at a convenient point and seeing if the separate clip envelopes will behave. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 14 Share Posted December 14 Perhaps send a copy of the project with the non responsive clip envelope. Link to comment Share on other sites More sharing options...
sjoens Posted December 14 Share Posted December 14 (edited) I would try: 1. Bouncing the clip 1st then adjust gain 2. Copy clip to a new track by Ctrl+drag to lower empty space (not using the Duplicate Track function) then adjust gain 3. Adjusting gain on another part of the clip to reproduce issue If none of these work, the clip could be compromised. 11 hours ago, icu81b4 said: Looks like I'm going to have to go back to earlier versions and start over! I've had to do this many times - thus the reason for multiple saved project versions. Edited December 14 by sjoens Link to comment Share on other sites More sharing options...
icu81b4 Posted December 14 Share Posted December 14 11 hours ago, Noel Borthwick said: Perhaps send a copy of the project with the non responsive clip envelope. Thanks Noel, Can you point me in the right direction on how to do that? I have deleted all the tracks and fx apart from one track and it is still not working as it should, So I'm guessing this particuler project is corrupt somehow. If I start afresh and import the clip into a track it works fine. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 14 Share Posted December 14 Zip or save it as a cwz file and upload to any file share service. Then send a pm with the link. Link to comment Share on other sites More sharing options...
icu81b4 Posted December 15 Share Posted December 15 Hi Noel, I have PM'd you the complet project, I cut it down so it's only small, and I had an incorrect path error when trying to zip it up. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 15 Share Posted December 15 @icu81b4 clip gain does not apply to clips that have region effects. Region effects read raw audio data directly from the clip. If you want to use clip gain you will have to bounce to clip first. 2 1 Link to comment Share on other sites More sharing options...
David Baay Posted December 15 Share Posted December 15 4 hours ago, Noel Borthwick said: clip gain does not apply to clips that have region effects. I knew I should have asked for a screenshot that wasn't zoomed in so far to see the full context, but given that the clip gain was having a visual (as well as audible) effect on part of the clip, shouldn't his screenshot show a color change in the clip where the Region FX starts? Link to comment Share on other sites More sharing options...
icu81b4 Posted December 15 Share Posted December 15 4 hours ago, Noel Borthwick said: @icu81b4 clip gain does not apply to clips that have region effects. Region effects read raw audio data directly from the clip. If you want to use clip gain you will have to bounce to clip first. I've pm'd you again ... But for David's benifit I have repeated my response. Well, that's something i've learned, but why is the same error occuring on the last part of the track, the clip withour any region effects applied? Link to comment Share on other sites More sharing options...
Steve Moddelmog Posted December 16 Share Posted December 16 On 12/13/2024 at 4:35 AM, Toy said: it is not directly related to the performance of Sonar, It looks like the "Cakewalk Product Center" doesn't recognize the version correctly. Same here 1 Link to comment Share on other sites More sharing options...
Jesse Jost Posted Wednesday at 10:33 AM Share Posted Wednesday at 10:33 AM @Toy @Steve Moddelmog On 12/13/2024 at 4:35 AM, Toy said: it is not directly related to the performance of Sonar, It looks like the "Cakewalk Product Center" doesn't recognize the version correctly. On 12/16/2024 at 9:44 AM, Steve Moddelmog said: Same here We just released a new version of CPC, which resolves this. Please lmk if you encounter any issues. Ty! 2 Link to comment Share on other sites More sharing options...
Wookiee Posted Wednesday at 12:50 PM Share Posted Wednesday at 12:50 PM @Jesse Jost Couple of points Following the download of the new CPC it did not launch the installer automatically. It also Identified a number of things to install for both Sonar and Next that are already installed, is that correct? I checked the version they are up to date. And thanks but I have Melodyne Studio installed is there no way that can be identified? Just a couple of observation no biggy. 2 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted Friday at 11:21 PM Share Posted Friday at 11:21 PM No melodyne is a completely different installer and it isn't appropriate for product center to sniff out other companies products. Installing cakewalk's version of melodyne won't have any detrimental effect on the studio version because they handle that automatically. Iow it will not affect your studio license. 1 Link to comment Share on other sites More sharing options...
Keith Wilby Posted yesterday at 10:34 AM Share Posted yesterday at 10:34 AM (edited) On 12/12/2024 at 11:41 AM, crazy sniffable said: After restarting Sonar due to issue 1, in the quick start menu, my file has " (untitled)" at the end of it, although it has a title, and it doesn't include "(untitled)" in it @crazy sniffable I had a similar issue. Seems to pick this information up from the project notes in the browser. Edited yesterday at 10:34 AM by Keith Wilby Link to comment Share on other sites More sharing options...
crazy sniffable Posted 8 hours ago Share Posted 8 hours ago On 12/13/2024 at 5:17 AM, Wookiee said: @crazy sniffable are you using Workspaces? Not all Workspaces have the same commands, it is how Workspaces work. Sorry, I missed your reply. I'm not using Workspaces. If the question was related to my issue with menu options not being available, it wasn't just a few - the only menu options were those that show when you have no project open. Pretty sure it's a bug with the "one project open at a time". Thanks though. Link to comment Share on other sites More sharing options...
Wookiee Posted 4 hours ago Share Posted 4 hours ago @crazy sniffable in the track view look for the custom, change to all. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now