Promidi Posted December 14 Share Posted December 14 5 hours ago, Ron Smit said: I executed the redist installer, but still, unfortunately, the same problem. See if uninstalling your Vdist runtimes then runing the Cakewalk redist installer helps. Im am not sure if Cakewalk’s redist installer requires Vdist to be present in the first place. If it does, then you can run Microsoft’s latest Vdist runtime. See: (Next to X86) https://learn.microsoft.com/en-au/cpp/windows/latest-supported-vc-redist?view=msvc-170#latest-microsoft-visual-c-redistributable-version Link to comment Share on other sites More sharing options...
Xoo Posted December 14 Share Posted December 14 If it's stuck, you should be able to generate a Windoes dump (.dmp) file which I'm sure would help the Bakers. Link to comment Share on other sites More sharing options...
Ron Smit Posted December 15 Share Posted December 15 11 hours ago, Promidi said: See if uninstalling your Vdist runtimes then runing the Cakewalk redist installer helps. Im am not sure if Cakewalk’s redist installer requires Vdist to be present in the first place. If it does, then you can run Microsoft’s latest Vdist runtime. See: (Next to X86) https://learn.microsoft.com/en-au/cpp/windows/latest-supported-vc-redist?view=msvc-170#latest-microsoft-visual-c-redistributable-version Tried it. I'm afrtaid this didn't work for me. Link to comment Share on other sites More sharing options...
Promidi Posted December 15 Share Posted December 15 2 minutes ago, Ron Smit said: Tried it. I'm afrtaid this didn't work for me. If you rename your aud.ini file (found here: "%AppData%\Cakewalk\Cakewalk Core\") Does Cakewalk start? Link to comment Share on other sites More sharing options...
Ron Smit Posted December 15 Share Posted December 15 Cakewalk send me an email after my post on this forum en asked for a crash dump file (How to create a crash dump file: I'm experiencing crashes. How do I create/generate a dmp file? – Cakewalk Help Center). I received the following answer and it worked for me. CW is functioning again! Hope this helpes. Thanks for sending that over! I had a look, and it seems the issue might be with the ASIO4ALL64.dll module. This usually points to a problem with the ASIO4ALL driver. To troubleshoot, you could try: Uninstalling ASIO4ALL: If you’re not actively using it, removing it might resolve the issue. Updating/Reinstalling ASIO4ALL: If you need it, grab the latest version from their official website. Switching to a Different Audio Driver: If you’re using another interface or sound card, ensure its driver is up to date and selected in Cakewalk. After trying these steps, give Cakewalk another shot and let me know how it goes! Link to comment Share on other sites More sharing options...
Patrick Desmond Posted Sunday at 05:53 PM Share Posted Sunday at 05:53 PM With all due respect, I only want a product that works...period. I don't have time for technical explanations and after so many attempts of trying to make things work I finally just reinstalled Windows and I'm not going to install Sonar or Cakewalk until and unless Band Labs can make it work...period. I'm a (potential) customer of Band Labs and a musician, not a technician and I don't want to be a technician. If I have to be a tech, I'll move on to a different platform regardless of cost and be a tech long enough to learn that platform so that I can be a musician again. It won't take long. Other DAW's (or at least one other...) do work as they're supposed to upon installation. I hope BL fixes this as I have used Cakewalk and the Sonar before it for years and I truly would LOVE for all of this to be the #1 platform in computer recording but at this point I'm just not confident I won't end up burning more time in left brain hell than investing more time in right brain creativity. Link to comment Share on other sites More sharing options...
David Baay Posted Sunday at 06:56 PM Share Posted Sunday at 06:56 PM 57 minutes ago, Patrick Desmond said: With all due respect, I only want a product that works...period. Shouldn't you be posting this on Microsoft's forum since a Windows Update precipitated this? That's a lot of vitriol for someone who has apparenly only found it necessary to come to the forum with a problem once in years of using CW. In any case, it seems you missed this post about CW's fix for Microsoft's blunder: 3 Link to comment Share on other sites More sharing options...
Vince McGarry Posted Monday at 12:38 PM Share Posted Monday at 12:38 PM On 12/9/2024 at 10:21 PM, mettelus said: Try this out first, there have been recent issues with other software installing improper C++ Redistributables. If CbB will not even load, that could be a reason. That worked for me. 1 Link to comment Share on other sites More sharing options...
michheld Posted Tuesday at 12:19 PM Share Posted Tuesday at 12:19 PM Hi2all, I had this symptom, too. The Windows Log said it crashed due to MSVCP140.dll problems. The last Win 10 22H2 (KB5048652) seems to have caused this. The cakewalk redist installer solved the problems <3 Even Cakewalk Product center runs now. ThxAloT Link to comment Share on other sites More sharing options...
4th Eden Posted Thursday at 06:11 PM Share Posted Thursday at 06:11 PM On 12/13/2024 at 6:40 PM, Patrick Desmond said: Same here. Cakewalk opened one day, the next day when trying to open CWbBL, "Windows has encountered a problem" message comes up while Cakwalk mast head hangs and only option is to shut it down. I did do a windows update the day before yesterday but ran CWBBL after with no issues. Uninstalled, reinstalled, COMPLETE uninstall, clean install...same problem. I also installed a legacy version of Sonar Professional from the old Control Center and it runs fine albeit without the quality of the newer CWBBL. Bandlabs wants me to pay for this? I also downloaded and installed/tried to run Cakewalk Product Center and it won't even run. I am now having issues loading CbB... it just hangs...the only clue is I updated yesterday...now it just hangs... I would like to try and rollback Link to comment Share on other sites More sharing options...
David Baay Posted Thursday at 07:23 PM Share Posted Thursday at 07:23 PM 1 hour ago, 4th Eden said: I am now having issues loading CbB... it just hangs...the only clue is I updated yesterday...now it just hangs... I would like to try and rollback I repeat: 1 Link to comment Share on other sites More sharing options...
4th Eden Posted Thursday at 10:36 PM Share Posted Thursday at 10:36 PM On 12/10/2024 at 6:56 PM, Bristol_Jonesey said: Have you tried a Clean Install? yes i did this I still have crashes..I assume the Redist program needs to run after re-instll of CbB? Link to comment Share on other sites More sharing options...
4th Eden Posted Thursday at 10:36 PM Share Posted Thursday at 10:36 PM 3 hours ago, David Baay said: I repeat: So 1. re-install 2024.12? 2. run Redist? Link to comment Share on other sites More sharing options...
David Baay Posted yesterday at 12:01 AM Share Posted yesterday at 12:01 AM 1 hour ago, 4th Eden said: So 1. re-install 2024.12? 2. run Redist? Should not be necessary to reinstall, just run the VC Redist repair tool. Link to comment Share on other sites More sharing options...
DCMG Posted yesterday at 06:14 AM Author Share Posted yesterday at 06:14 AM There's enough activity on this issue to suggest CW might want to address this in a clean thread; maybe even delete this one for clarity. I would change the title but I haven't seen an immediate way to do so? If I'm missing something please let me know and I will alter the title for clarity. Link to comment Share on other sites More sharing options...
David Baay Posted yesterday at 07:04 AM Share Posted yesterday at 07:04 AM 41 minutes ago, DCMG said: I would change the title but I haven't seen an immediate way to do so? Click elipsis in the upper right corner of your initial post and choose Edit. You can place your cursor in the title to edit it as well as the body. It;s customary to just add SOLVED! to the start of the existing title. I would also suggest you link Noel's post from page 3 and/or the download link for his VC Redist repair tool. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted 21 hours ago Share Posted 21 hours ago 9 hours ago, DCMG said: There's enough activity on this issue to suggest CW might want to address this in a clean thread; maybe even delete this one for clarity. There has already been a dedicated thread for redist issues for ages. We don't need more threads. This is a Windows problem not a Cakewalk issue. Its happening to other apps as well. All we can do is guide users to solve the problem themselves. All our latest installers automatically attempt to repair the redist. There isn't anything further we can do. If anyone has problems beyond this I suggest contacting Microsoft support. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now