Craig Anderton Posted October 23, 2019 Share Posted October 23, 2019 As many of you know, I write a monthly column about CbB for Sound on Sound magazine. There's never a shortage of techniques to write about :), but I thought I'd ask if there were any aspects of the program where you'd like a column that went into a topic in particular depth. For example, at one point there were some threads where people were trying to make sense of all the export options, so I did a column about exporting and its many applications. Thanks! 3 1 1 Link to comment Share on other sites More sharing options...
chuckebaby Posted October 23, 2019 Share Posted October 23, 2019 The new "Selection markers" seem to be a tough one for new users. I think its a great feature (could possibly be even better) but its been asked about here quite a bit. 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 23, 2019 Share Posted October 23, 2019 I think a redux of the new take management 2.0 might be cool. There are numerous changes that now facilitate using lanes for assembly esp when using the new customizable smart tool. Users from the old 8.5 layers workflow can now use lanes to organize their data prior to doing comping.We had a few video's in the 07 feature overview that might provide food for thought. Some other topics might be utilizing mix recall, using lenses to customize for different workflows (tracking, vs mixing vs beat making etc) 3 Link to comment Share on other sites More sharing options...
Jim Fogle Posted October 23, 2019 Share Posted October 23, 2019 11 minutes ago, Noel Borthwick said: using lenses to customize for different workflows (tracking, vs mixing vs beat making etc) ^^^^^ This! ^^^^^ Perhaps a lens versus screen set comparison. 3 Link to comment Share on other sites More sharing options...
JoeGBradford Posted October 23, 2019 Share Posted October 23, 2019 Agree - I haven't used lenses or screensets properly yet and not entirely sure of the difference! 1 Link to comment Share on other sites More sharing options...
Craig Anderton Posted October 23, 2019 Author Share Posted October 23, 2019 Thanks everyone for chiming in! I covered Lenses in February 2017; the info is still valid and online, so I probably won't cover that. There was a column on Mix Recall in February 2016, and that's online as well (although maybe it's time for a refresh). The Selection Markers and Take Management suggestions are great topic ideas. Feel free to keep those ideas coming! 2 Link to comment Share on other sites More sharing options...
InstrEd Posted October 23, 2019 Share Posted October 23, 2019 52 minutes ago, Craig Anderton said: Selection Markers and Take Management I would love for you to do an article on this Craig. Link to comment Share on other sites More sharing options...
Promidi Posted October 23, 2019 Share Posted October 23, 2019 4 hours ago, JoeGBradford said: Agree - I haven't used lenses or screensets properly yet and not entirely sure of the difference! Lenses are global, where as screensets are per project Lenses are more to do with hiding features that don't fit with your workflow. For instance, if you never intend using the virtual keyboard, you can use Lenses to hide it from where ever it would normally appear. Lenses can also affect the way your windows are laid out - but you can tell a lense not to have any effect on screen layout. That way you can leave screen layouts up to screensets. Screensets are more to do with Windows layouts. 3 1 Link to comment Share on other sites More sharing options...
JoeGBradford Posted October 23, 2019 Share Posted October 23, 2019 Ah thanks! Link to comment Share on other sites More sharing options...
RBH Posted October 23, 2019 Share Posted October 23, 2019 (edited) I do wish there was a method to simply ( by default ) re-call the last (used) screen set. I often wish to boot -up a project exactly where I left off in the last session - which might include window focus -zoom levels, plug in focus etc. I find it confusing to try to save an overwrite of a different screen set # in order to capture my exact settings. They seem to flash on screen upon project load - so there seems to be a recalled state of the last session , then they are over written by the screen set or lens. Maybe just switchable method to skip loading a screen set or lens would do it. Not sure what would happen if you start a new session with that off though. Edited October 23, 2019 by RBH Link to comment Share on other sites More sharing options...
Promidi Posted October 24, 2019 Share Posted October 24, 2019 59 minutes ago, RBH said: I do wish there was a method to simply ( by default ) re-call the last (used) screen set. I use 4 screensets per project and regularly switch between them. I also use a Lense. With the lense, I have deselected "Windows layout" using Lense Manager. This enables the project to load exactly as I have left it, complete with the Screenset it was set to upon save. This is because, with this configuration, it's the Screenset that is solely responsible for any screen layout. If you don't deselect "Windows layout" in the lense, the lense layout overrides the screenset's layout. 1 Link to comment Share on other sites More sharing options...
Terry Kelley Posted October 24, 2019 Share Posted October 24, 2019 Midi copy and paste is weird. I can do clip loops but just selecting a measure to copy and paste results in the first paste being a couple of ticks later than I specify. If I do multiple measure of paste, each one is a couple of ticks later than the prior one. For example, if I paste a measure at 7:01:000 it actually pastes at 7:01:003. If I tell it to paste 10 times, the second one is at 8:01:006, then 9:01:009, etc. I don't know why it shifts it out. Not sure I am making any sense ... And the function to snap to measure doesn't always. A tutorial on non-clip loop copy and paste would be nice. 1 Link to comment Share on other sites More sharing options...
Starship Krupa Posted October 24, 2019 Share Posted October 24, 2019 You may have covered this already, but I had a bear of a time getting Drum Maps to work, understanding them, figuring out where the commands were to add them to a project, get them to show up in the Piano Roll, etc. My batting average for having it work the first time was ZERO for 6 months. Something always went wrong. I'd bat it all around and think I had it ready to go and then....no sound, or no drum pane, or whatever, and I'd have to go back and fix something. And sometimes I'd have to start over completely. Finally I found the time to sit down with a blank project and the Reference Guide and drill over and over and ask questions on the forum and tried and failed until I finally understood what was going on and how to add them to a project and assign them. My hope is that someday we will be able to set up and assign Drum Maps entirely from the Piano Roll View, but for now, we set them up from the Console or Track View. Those savvy with Track Templates can skip all that hassle, but why is it such a hassle? Anyway, Drum Maps For The Uninitiated would be most welcome, and if it also included a how-to on getting the drum note names to appear on the notes in the PRV, that would be splendid. Link to comment Share on other sites More sharing options...
Brian Walton Posted October 24, 2019 Share Posted October 24, 2019 Hopefully a future article on Chord and Aranger tracks in Cakewalk. ? In the meantime + 1 on drum maps or the current version of take lanes. Link to comment Share on other sites More sharing options...
razor7music Posted October 24, 2019 Share Posted October 24, 2019 I find the little intro messages when I first launch CbB to be very confusing - even misleading! One read "This one's going to be a hit" and so far that hasn't proven to be true. Basically, false advertising! (jk - of course) 2 3 Link to comment Share on other sites More sharing options...
martsave martin s Posted October 25, 2019 Share Posted October 25, 2019 groove-looping is a mystery for me,i mean (audio-clip)sometime it work,but most of the time it change the(tempo)of the clip.. midi work good martin Link to comment Share on other sites More sharing options...
Jimbo 88 Posted October 25, 2019 Share Posted October 25, 2019 So I vote for take lanes. Also I think a refresher course on basic midi and transport features might be a good thing due to the recent updates. I'm stumbling a little on those once in a while and probably not taking advantage of all the features. Link to comment Share on other sites More sharing options...
wetdentist Posted October 25, 2019 Share Posted October 25, 2019 shouldn't the Matrix be updated? Link to comment Share on other sites More sharing options...
Skyline_UK Posted October 25, 2019 Share Posted October 25, 2019 Take Lanes for me. I never use them even though I have a feeling they'll probably give me a productivity boost. I could do with a 'De-Mystify' article. ? Link to comment Share on other sites More sharing options...
bitman Posted October 26, 2019 Share Posted October 26, 2019 Confusing no, annoying yes. Right click prv notes select "use these note names instead" should stick for the midi track you were doing this on, such as the drums. I've read posts by Scook that state that one must go into preferences-> midi->instruments and assign a an output to an .ins but my drum synth isn't there and assigning the first hardware out to GM Drums doesn't make anything stick like it is stated it should. I probably have this all wrong, but it shouldn't be this tedious. Either to make it stick, which it doesn't ,or to continually have to "use these note names instead". Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now