Jack Stoner Posted October 9, 2019 Share Posted October 9, 2019 (edited) Just installed the new Ozone 9 (Standard) upgrade. I loaded a finished song that I had used Ozone 5 on to test. As I was scrolling through the Ozone 9 presets (while the song was playing) on the mixed down track both Cakewalk (latest 09 version) and Sonar Platinum aborts and closes. No diagnostic info - just closes. I supposed its an Ozone problem but ????? My DAW desktop is an i7 6700K with 16GB RAM and an SSD. Edited October 11, 2019 by Jack Stoner Link to comment Share on other sites More sharing options...
arlen2133 Posted October 9, 2019 Share Posted October 9, 2019 Hey Jack, Just saw that OZ9 has a new update 9.02 You might want to check it out.. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 10, 2019 Author Share Posted October 10, 2019 I have 9.02 version. It was what was installed yesterday when I bought and downloaded it. 1 Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 11, 2019 Author Share Posted October 11, 2019 I have solved what is causing the DAW programs to abort. Its Ozone 9. I had forgot to try Studio One as I installed it when Sonar folded but have never used it. I tried Ozone 9 with Studio One and it causes it to abort too. Link to comment Share on other sites More sharing options...
John Posted October 11, 2019 Share Posted October 11, 2019 I have Ozone 9 Advanced and it has not caused any problems on my system with any DAW I have. Link to comment Share on other sites More sharing options...
ensconced Posted October 11, 2019 Share Posted October 11, 2019 No problems with Studio One and Ozone 9 here Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 11, 2019 Author Share Posted October 11, 2019 Have you tried different factory presets while a song (or track) is playing? That's when it will abort. Might not do it on the first one you select but at some point it will do it. That's how I originally got the aborts. I installed Ozone 9, loaded a finished Cakewalk project (song) that I had used Ozone 5 for mastering. Disabled the 5 plugin and opened Ozone 9, started playing the mix and started trying the presets. Same thing happened with Studio One 4.5 Pro. If I select a preset and then start the song or track there is no problems. Its not the recording interfaces as it does it with either my MOTU 4pre or Behringer U-Phoria UMC1820 Link to comment Share on other sites More sharing options...
John Posted October 11, 2019 Share Posted October 11, 2019 I have never done that with any plugin. I stop the transport when ever I need to change a plugin preset. I do this out of habit. 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 11, 2019 Share Posted October 11, 2019 Hi @Jack Stoner I've been doing a bunch of tests here with switching presets a lot while playing and did not see any crashes yet. I tested multiprocessing, 64 bit processing as well as load balancing and everything seemed pretty stable. In fact it was an improvement over prior versions of Ozone. 1 Link to comment Share on other sites More sharing options...
ensconced Posted October 11, 2019 Share Posted October 11, 2019 8 hours ago, Jack Stoner said: Have you tried different factory presets while a song (or track) is playing? That's when it will abort. Might not do it on the first one you select but at some point it will do it. That's how I originally got the aborts. I installed Ozone 9, loaded a finished Cakewalk project (song) that I had used Ozone 5 for mastering. Disabled the 5 plugin and opened Ozone 9, started playing the mix and started trying the presets. Same thing happened with Studio One 4.5 Pro. If I select a preset and then start the song or track there is no problems. Its not the recording interfaces as it does it with either my MOTU 4pre or Behringer U-Phoria UMC1820 Gave it another whirl, doing what you suggest (which I had done previously), nothing, nada, zip , works fine here. 1 Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 12, 2019 Author Share Posted October 12, 2019 It won't do it "every time" a preset is switched while playing. The fact it will also do it with Studio One 4.5 Pro (latest version) says its something other than the DAW. Ozone 9 is the only VST I've found that will do this. I switch presets often when trying one and have not had the problem with any other VST, just Ozone. I have Ozone 5, 6 and now 9 installed and have only had the problem with 9, although I rarely use 6 so I can't say if it will do it. I'll have to hold off testing for a while. I have a (paid client) CD project I'm working on (more recording today). I'll wait till after the project is completed. Link to comment Share on other sites More sharing options...
chuckebaby Posted October 12, 2019 Share Posted October 12, 2019 1 hour ago, Jack Stoner said: I have Ozone 5, 6 and now 9 installed and have only had the problem with 9 Possibly a graphics issue ? changing presets requires changing the UI. I would check my onboard/graphics card for updates (may require Open GL2). I would even go as far as turning Windows 10: Ease of Access to its original default. I know it all this sounds like over kill but if you want to figure out the issue, I would go to the extremes. Ozone does require quite a bit of demand from the graphics, Add that to a moving play head and your asking your system to do a bit of work. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 12, 2019 Author Share Posted October 12, 2019 38 minutes ago, pwalpwal said: do you get the crash swapping presets when the project isn't playing? As previously note, it doesn't happen if a project isn't playing. UPDATE: Izotope support asked me to try it with the Standalone application. I loaded a wav file and played it and started scrolling through presets and after about 15 presets it aborted and closed. Using the Standalone and playing a wav file uses the PC's audio (Realtek) not a recording interface unit. In ref to video, I have an AMD Radeon RX950 (with latest drivers) and I disabled that and tried to the Intel i7 6700K CPU Video and did the same thing. Ease of Access is at Defaults. I tried turning off the options but that made no difference. My Win 10 version is the latest 1903 (with updates). It should be reiterated that no other VST (2 or 3) has this issue. I can load any other (all that I've tried) and scroll through presets while a project is playing and it does not cause the problem. As noted, I'll be off of this problem for a while to do a CD project. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 15, 2019 Author Share Posted October 15, 2019 I finally got a chance to work on the problem. 1. Izotope allowed me to install Ozone 9 on a second PC. Its a laptop that I use for off-site recordings. It does not do it on that PC (also Win 10 like my Desktop DAW). 2. I tried scrolling through presets while playing a project with Ozone 5 and Ozone 6. It does not do it with Ozone 5 but it does with Ozone 6. I've turned this info over to Ozone support and I'll see what they have to say about that. 3. Known things it (apparently) is not. (a) not DAW specific as it does it with both Cakewalk/Sonar and Studio one 4.5 Pro (b) it does it with the Ozone 9 standalone app. (c) It does it with both my AMD Radeon RX580 and the Intel CPU graphics. (d) It does it with both the PC audio (Realtek) and with the MOTU 4Pre. (e) It does not do it with other VST plug-ins. Link to comment Share on other sites More sharing options...
ensconced Posted October 15, 2019 Share Posted October 15, 2019 (edited) On 10/12/2019 at 8:16 PM, Jack Stoner said: It won't do it "every time" a preset is switched while playing. The fact it will also do it with Studio One 4.5 Pro (latest version) says its something other than the DAW. Ozone 9 is the only VST I've found that will do this. I switch presets often when trying one and have not had the problem with any other VST, just Ozone. I have Ozone 5, 6 and now 9 installed and have only had the problem with 9, although I rarely use 6 so I can't say if it will do it. I'll have to hold off testing for a while. I have a (paid client) CD project I'm working on (more recording today). I'll wait till after the project is completed. I can do it until the cows come home in Studio One and no issues, but whatever. Edited October 15, 2019 by ensonced Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 16, 2019 Share Posted October 16, 2019 Do you have the same OS on the two machines? Sometimes these bugs esp if they involve memory corruption can be hellish to track down since they may not show up on one system but show up repeatedly on another. It could also be hardware specific / graphics driver related etc. I have seen crashes with ozone in prior versions when changing presets but not in this version. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 16, 2019 Author Share Posted October 16, 2019 My DAW desktop has Win 10 Pro 1903 (with all current updates). The laptop, a Dell Inspiron 15, 5577 has Win 10 Home 1903 (with all current updates). The DAW desktop is an ASUS ROG Maximus VIII Hero Z170 motherboard with an i7 6700K (no overclocking) and 16GB of Corsair RAM. A Samsung EVO SSD. Resplendence Latency Mon shows no problems. I can run recording interfaces, reliably, at 64 samples. I use Windows Defender and Malwarebytes (paid version). There is no "garbage" in startup, only what is needed. Very "vanilla" system. 1 Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 17, 2019 Author Share Posted October 17, 2019 Update, I replaced the 16GB Corsair memory with 16GB GSkill memory. Didn't make a difference so memory can be eliminated. I know a clean OS install will fix it (since my other PC works OK) but I'd lose too much (paid and unpaid add-ons that are no longer available) plus the hassle of recovering MS Office/Outlook files, etc. I'm not going to do it just for this one Ozone 6/9 issue. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 17, 2019 Author Share Posted October 17, 2019 I'm using the Windows Defender, its not intrusive like some AV programs. The one that works OK also had Windows Defender enabled for testing and it didn't interfere. It falls back to some issue between the OS and Ozone. And the only known issue I have with this system is the Ozone issue. No other application or device has any problems. Ozone 6 was completely uninstalled (PC rebooted) and reinstalled and the problem remained. I haven't uninstalled/reinstalled 9 but based on it not helping Ozone 6 I don't see where it will fix the problem. Like Ozone 6 (that I don't use) I don't foresee me using 9 very much. Ozone 5, Country Basic, is perfect for 99% of what I do. Link to comment Share on other sites More sharing options...
Jack Stoner Posted October 18, 2019 Author Share Posted October 18, 2019 (edited) The event viewer shows it as Ozone 9 "problem", but I have no idea what it is telling me. Edited October 18, 2019 by Jack Stoner Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now