Larry Shelby Posted November 3, 2022 Share Posted November 3, 2022 NEW CAB ENGINE & 24 NEW CABS Described as “the biggest sonic improvement to Helix® since it first shipped back in 2015” by Chief Product Design Architect Eric Klein, the free Helix 3.50 firmware update applies to all Helix and HX® family amp and effects processors. It introduces an entirely new IR-based speaker cabinet engine along with 20 new guitar cabs, four new bass cabs, and a choice of 12 microphones. You can change the mic angle, position, and distance in relation to the cabs (and even drag the mics around in space using the HX Edit application). The update also includes five new amp models, seven new effects, and new features including Dual IR Blocks. Update Now https://line6.com/software/ 2 2 Link to comment Share on other sites More sharing options...
simon Posted November 3, 2022 Share Posted November 3, 2022 the website seems to have ground to a halt 1 Link to comment Share on other sites More sharing options...
reginaldStjohn Posted November 3, 2022 Share Posted November 3, 2022 I love when they send you a cool new update that then crashes their web page. I can wait till it calms down a bit. First installers always find a few glitches anyway Link to comment Share on other sites More sharing options...
simon Posted November 3, 2022 Share Posted November 3, 2022 website seems to be recovering - I have it now installed and running. lots of great updates Link to comment Share on other sites More sharing options...
Jim Roseberry Posted November 3, 2022 Share Posted November 3, 2022 Huge update for Helix. Cabs sound significantly better. ie: Take the MESA 4x12 SM57 - edge-of-cap with distance of 2" M160 - center with distance of 12" Sounds exactly as it should. No high/low cuts necessary Maybe it's just me... but I think the Placater (BE-100) model now feels more responsive/lively. 2 Link to comment Share on other sites More sharing options...
simon Posted November 3, 2022 Share Posted November 3, 2022 Helix is the gift that keeps giving (unlike IKM/Amplitube!) 2 Link to comment Share on other sites More sharing options...
Bapu Posted November 3, 2022 Share Posted November 3, 2022 (Native) Installed! Link to comment Share on other sites More sharing options...
InstrEd Posted November 3, 2022 Share Posted November 3, 2022 12 minutes ago, Bapu said: (Native) Installed! Why are you telling us about your deodorant choice? Link to comment Share on other sites More sharing options...
Craig N Posted November 3, 2022 Share Posted November 3, 2022 The new ambience reverb sounds really good, just make sure it's set to stereo. I liked the 12m size. A lovely roomy ambience. 1 Link to comment Share on other sites More sharing options...
TheSteven Posted November 3, 2022 Share Posted November 3, 2022 (edited) 4 hours ago, cclarry said: Free Helix 3.50 Update for All Helix and HX Processors Woot! 3 hours ago, simon said: Helix is the gift that keeps giving (unlike IKM/Amplitube!) ^^^What he said Edited November 3, 2022 by TheSteven 3 Link to comment Share on other sites More sharing options...
mettelus Posted November 4, 2022 Share Posted November 4, 2022 This update was truly massive. I didn't read the release notes till after the update... "IMPORTANT! The 3.50 update process may take 30 MINUTES OR MORE TO COMPLETE. This is totally normal, as it includes significant improvements to Helix Core and thousands of IR files." 30 minutes was about right. I never had a firmware update take so long in my life. Good timing since I put 10s back on my main guitar earlier this week after using 9s for a few years! I just got done kicking the tires on the update for a few hours and it is rather nice. I spent most of my time playing with amps and the Dual Block IRs (I pretty much focused on that feature) that I didn't have time to go through all the new stuff (yet). Link to comment Share on other sites More sharing options...
Bapu Posted November 4, 2022 Share Posted November 4, 2022 Native update was only about 5 minutes in length. Link to comment Share on other sites More sharing options...
TheSteven Posted November 4, 2022 Share Posted November 4, 2022 (edited) My installation was 5 minutes at the longest, probably more like 3. I ended up installing it twice cause I thought I must have accidentally bolloxed up the install for it to wrap up in the time that it did. Edited November 4, 2022 by TheSteven 1 Link to comment Share on other sites More sharing options...
simon Posted November 4, 2022 Share Posted November 4, 2022 FWIW I'm on Native - bear in mind that you might need to 'restore factory resets' to take advantage of the new presets - and back up your own presets first. Link to comment Share on other sites More sharing options...
TheSteven Posted November 4, 2022 Share Posted November 4, 2022 14 minutes ago, simon said: FWIW I'm on Native - bear in mind that you might need to 'restore factory resets' to take advantage of the new presets - and back up your own presets first. I thought it, the update, nuked your settings while installing the new presets - hence the need to back up. If not then I still need to do the 'restore' to finish my update. Link to comment Share on other sites More sharing options...
simon Posted November 4, 2022 Share Posted November 4, 2022 22 minutes ago, TheSteven said: I thought it, the update, nuked your settings while installing the new presets - hence the need to back up. If not then I still need to do the 'restore' to finish my update. on mine (Native) it kept the original presets - none of which took advantage of the new gear - I had to do a 'restore' - there is something in the installation notes about it. 1 Link to comment Share on other sites More sharing options...
Mesh Posted November 4, 2022 Share Posted November 4, 2022 Now might be a good time for me to jump in on Helix (Native), but first need to test out IK's TONEX . Link to comment Share on other sites More sharing options...
Daniel Hulse Posted November 4, 2022 Share Posted November 4, 2022 (edited) John Cordy has a review of the 3.5 changes. He's great at setting up patches for Helix, and they are all applicable to Helix Native: https://youtu.be/o8RqYIsCeMw Edited November 4, 2022 by Daniel Hulse 1 Link to comment Share on other sites More sharing options...
mettelus Posted November 4, 2022 Share Posted November 4, 2022 The HELIX Floor update was 30 minutes (firmware). Native is a software update, so went fast. The firmware update did not overwrite patches, so the new ones will only get installed with a factory reset as @simon mentioned above. Be sure to backup first, and then you can then move patches/setlists with HX Edit. Link to comment Share on other sites More sharing options...
Dono Lee Posted November 4, 2022 Share Posted November 4, 2022 HELP! I have been re-amping quite a bit over the last week with great success using the helix via USB, until I did the update this morning. Unfortunately, when Helix is connected via USB, Cakewalk now goes “non-responsive” when hitting “Rec”. I am on the most current version of Cakewalk. I have a robust dedicated DAW. Everything worked perfectly before the update this morning. Apparently other cakewalk users are experiencing what they define as various ASIO-comm issues as well, according to the Line 6 forum. I would attach the link if I knew how, LOL. Reverting back to the previous version does not resolve the issue. Also, apparently line 6 has been able to reproduce the issue. So we’re waiting for them to respond, I guess. Have any of y’all experienced these issues? Dono Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now