msmcleod Posted December 7, 2021 Share Posted December 7, 2021 1 hour ago, Wong Jian Ming said: I've noticed this issue with task recall, not sure if this is expected behavior: So basically I've got a task setup to export a certain time selection for the entire mix. However, if i make some new cuts on a clip, those clips with the new cuts wont have any sound. See my video below which shows this behavior. If this is the expected behavior, then it kind of doesn't make sense that everytime I make a new cut I have to recreate a new task to include the new clips. Is there a way to create a task recall that always renders out everything in that time selection? As soon as you make a time selection, you get a tracks/clips selection. As it's perfectly valid to also save a task with unselected clips, the task only renders clips that were selected at that time. So you've two choices: 1. Have no selection (i.e. Entire Project range) 2. Have the selection, but before exporting: - Recall the task - Uncheck, then re-check your tracks ( you can uncheck/check all tracks by CTRL + SHIFT clicking on one of the tracks). This refreshes the selection to include your new clips. - Update the task to save the new selection Link to comment Share on other sites More sharing options...
Andres Medina Posted December 8, 2021 Share Posted December 8, 2021 Nested Folders: The Mute button of a nested folder behaves differently depending on the stop-playback status: When in stop, muting the nested folder button mutes all tracks (midi+audio) When in playback, the audio track is not muted, but the midi tracks are. Muting on Stop.mp4 Muting on Playback.mp4 1 Link to comment Share on other sites More sharing options...
msmcleod Posted December 8, 2021 Share Posted December 8, 2021 On 12/6/2021 at 4:59 PM, Andres Medina said: Nested Folders: When a nested folder contains a mix of archived and un-archived tracks, the status indicator of the container folder fails to indicate this. (second image shows the status when soloed tracks are present) This has been fixed for the next drop. 2 1 Link to comment Share on other sites More sharing options...
Andres Medina Posted December 8, 2021 Share Posted December 8, 2021 1 hour ago, msmcleod said: This has been fixed for the next drop. great!! thanks - Link to comment Share on other sites More sharing options...
Terry Kelley Posted December 9, 2021 Share Posted December 9, 2021 (edited) "Please test Region FX clips with Melodyne, elastique time stretching and verify that VST3 plug-in operations work normally." Melodyne: I still have to click on the clip to get the blobs to show up but Melodyne is otherwise working. Elastique: Time stretch and compress appear to be working. Melodyne VST: No clue how to work it or what would be correct! It transfers and draws so ... Edited December 9, 2021 by Terry Kelley 1 Link to comment Share on other sites More sharing options...
Mark Morgon-Shaw Posted December 9, 2021 Share Posted December 9, 2021 This is great, love the nested folders...finally ! Thanks team. I will test them to destruction on the next couple of tracks. I think someone else mentioned it but a visual indication that a folder contains sub folders would be a nice to have when the folder is collapsed. Link to comment Share on other sites More sharing options...
Andres Medina Posted December 10, 2021 Share Posted December 10, 2021 5 hours ago, Terry Kelley said: "Please test Region FX clips with Melodyne, elastique time stretching and verify that VST3 plug-in operations work normally." Melodyne: I still have to click on the clip to get the blobs to show up but Melodyne is otherwise working. Elastique: Time stretch and compress appear to be working. Melodyne VST: No clue how to work it or what would be correct! It transfers and draws so ... Melodyne VST working fine here. 1 Link to comment Share on other sites More sharing options...
CANAL DO PLAYBACK 1 Posted December 10, 2021 Share Posted December 10, 2021 sensacional! Porém, ao exportar o projeto em multipista, os efeitos contidos nos barramento como: reverb, plate e outros não são exportados. por exemplo: se eu quero exportar indo em : exportar > áudio e aqui deixar da seguinte forma:FILE TYPE - mp3FORMATO DO CANAL - acompanhar fonteCATEGORIA DA FONTE - pistas dessa forma, os FX que estão no barramento não serão exportados Link to comment Share on other sites More sharing options...
msmcleod Posted December 10, 2021 Share Posted December 10, 2021 48 minutes ago, CANAL DO PLAYBACK 1 said: sensacional! Porém, ao exportar o projeto em multipista, os efeitos contidos nos barramento como: reverb, plate e outros não são exportados. por exemplo: se eu quero exportar indo em : exportar > áudio e aqui deixar da seguinte forma:FILE TYPE - mp3FORMATO DO CANAL - acompanhar fonteCATEGORIA DA FONTE - pistas dessa forma, os FX que estão no barramento não serão exportados Exporting using a source category of "Tracks" will export the audio of each track before it goes through any buses. If you want the bus effects as well, use a source category of "Tracks through Entire Mix" Link to comment Share on other sites More sharing options...
rocstudio Posted December 10, 2021 Share Posted December 10, 2021 I really the subfolders. Definitely helps with organizing tracks! It appears the Vertical Zoom function is not working on the Folders and Sub Folders. I don't know if that was intentional. Thanks Roc Link to comment Share on other sites More sharing options...
msmcleod Posted December 10, 2021 Share Posted December 10, 2021 16 minutes ago, rocstudio said: I really the subfolders. Definitely helps with organizing tracks! It appears the Vertical Zoom function is not working on the Folders and Sub Folders. I don't know if that was intentional. Thanks Roc AFAIK vertical zoom has never affected folder height. 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 10, 2021 Share Posted December 10, 2021 Its intentional that zooming vertically doesn’t affect folders. 1 1 Link to comment Share on other sites More sharing options...
Ewoof Posted December 10, 2021 Share Posted December 10, 2021 Oh thank God. Nested Folders are here 1 Link to comment Share on other sites More sharing options...
GreenLight Posted December 10, 2021 Share Posted December 10, 2021 On 12/3/2021 at 5:19 PM, Morten Saether said: Export Audio dialog: Add keyboard navigation support Fantastic, thanks for listening. ? Really looking forward to this usability enhancement! Link to comment Share on other sites More sharing options...
Herbert Zio Posted December 10, 2021 Share Posted December 10, 2021 It would be great if you could include folders in the Console View, it would help a lot with the flow of the mix. 2 2 Link to comment Share on other sites More sharing options...
sawed Posted December 10, 2021 Share Posted December 10, 2021 Would You Please do Something About Auto Tune Crashing While working? Thats sooooo anoyingg most of the time i crash on. Link to comment Share on other sites More sharing options...
summer2000 Posted December 10, 2021 Share Posted December 10, 2021 4 hours ago, Herbert Miron said: It would be great if you could include folders in the Console View, it would help a lot with the flow of the mix. +1 for folders in the Console View. Hope you can include this in the next update release. I appreciate all the work you guys put in this DAW. 3 2 Link to comment Share on other sites More sharing options...
Colin Lee Colenzo T Posted December 10, 2021 Share Posted December 10, 2021 (edited) Upc0mming Build Release ; Being a "FREE" t0p 0f the line DAW, any Update is greatly appreciated and graci0usly accepted. Y0ur gener0sity t0 the freelance-artist c0mmmunity is unparalleled. Sincerely,..CLT Edited December 11, 2021 by Colin Lee Colenzo T 2 Link to comment Share on other sites More sharing options...
eblack Posted December 11, 2021 Share Posted December 11, 2021 Hope one day we can use the Chinese version of the help module? Link to comment Share on other sites More sharing options...
Garry Todd Posted December 11, 2021 Share Posted December 11, 2021 I have issues when drawing really long midi notes in piano roll (lights Programming) it seems to stop responding after a certain length of note. Thanks . Link to comment Share on other sites More sharing options...
Recommended Posts