Apeirofobia Posted October 30, 2021 Share Posted October 30, 2021 5 minutes ago, Noel Borthwick said: I understand your use case perfectly. Its just very tricky to handle the routing to solo it... I have implemented some logic that seems to be working but it would require some regression testing. I can send you a build to try later. As for attaching a project, the easiest way is to save a small bundle file and attach it. Otherwise you will have to zip the entire project folder. Thanks! would it be useful if I attach the same project I showed in the video? Because right now I'm not working in any project. I made this video only to help in this update showing this particular issue I've had in the past. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 30, 2021 Share Posted October 30, 2021 Yes Link to comment Share on other sites More sharing options...
Apeirofobia Posted October 30, 2021 Share Posted October 30, 2021 19 minutes ago, Noel Borthwick said: Yes Ok. Here's the link to the bundle! https://we.tl/t-OxiVE9IvIn 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 31, 2021 Share Posted October 31, 2021 Build has been updated to 27.11.0.010 This contains the following additional improvements: Soloing a bus now includes any sidechain sends to plugins in tracks/buses Improvements to plugin silence flushing 2 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 31, 2021 Share Posted October 31, 2021 17 hours ago, Apeirofobia said: Thanks! would it be useful if I attach the same project I showed in the video? Because right now I'm not working in any project. I made this video only to help in this update showing this particular issue I've had in the past. @Apeirofobia please try the new build 10 that I posted. Link to comment Share on other sites More sharing options...
Spectrum424 Posted October 31, 2021 Share Posted October 31, 2021 Hi, Can confirm that a track with a send to an AUX is now audible together with the AUX if soloed. Thanks all! /CJ 1 Link to comment Share on other sites More sharing options...
Luciano Al Posted October 31, 2021 Share Posted October 31, 2021 Thank Noel, this solved my issue with IK Multimedia T-Racks5 v 5.5. plugins while exporting audio. 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted October 31, 2021 Share Posted October 31, 2021 48 minutes ago, Spectrum424 said: Hi, Can confirm that a track with a send to an AUX is now audible together with the AUX if soloed. Thanks all! /CJ Thanks, I think this fix was in the original build as well. Link to comment Share on other sites More sharing options...
Keni Posted October 31, 2021 Share Posted October 31, 2021 Thanks Noel. Happily, the toast reg entry persists with this build. Link to comment Share on other sites More sharing options...
Apeirofobia Posted October 31, 2021 Share Posted October 31, 2021 8 hours ago, Noel Borthwick said: @Apeirofobia please try the new build 10 that I posted. I just tried the new build and it works great! Thank you so much for your effort! 1 1 Link to comment Share on other sites More sharing options...
Bill Ruys Posted November 1, 2021 Share Posted November 1, 2021 Count me in to the adoring crowd. As a 25 year + veteran CW user, I'm loving what you guys are doing and the amazing gift that you have bestowed on us. I don't take it for granted. Thank you so much for continuing to develop this amazing tool. 8 1 Link to comment Share on other sites More sharing options...
spiffo Posted November 1, 2021 Share Posted November 1, 2021 21 hours ago, Noel Borthwick said: Build has been updated to 27.11.0.010 This contains the following additional improvements: Soloing a bus now includes any sidechain sends to plugins in tracks/buses Improvements to plugin silence flushing Just downloaded and tried it and now if I just Solo the Drum Bus and the Bass Bus the Sidechaining using Aux Sends on the Tracks now works without me having to Solo those Tracks as well! Top Job, thanks a lot for this! Link to comment Share on other sites More sharing options...
LittleStudios Posted November 1, 2021 Share Posted November 1, 2021 Quote Updated to 27.11.0.010 This contains the following additional improvements: Soloing a bus now includes any sidechain sends to plugins in tracks/buses Improvements to plugin silence flushing THANK YOU!! THANK YOU!! THANK YOU!! This works perfectly and is going to help my workflow so much. *HIGH FIVE* 2 Link to comment Share on other sites More sharing options...
Bill Phillips Posted November 2, 2021 Share Posted November 2, 2021 Not sure this is related to the new build but, I'm consistently seeing Cakewalk close when I click of the power button of a plugin in a PC FX Chain. So far I've noticed it with two plugins for sure: VX-64 and Klanghelm IVGI2 version 2.3.0. There may have been others. This seems recent or seems to occurring with more regularity with 2021.11 Build 010 which I installed this morning. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 2, 2021 Share Posted November 2, 2021 Do you get an error message when you do that? If not set the exception handling severity to 7, then restart the app and try and reproduce the problem. This is most probably the plugins corrupting the heap. If you get a crash dialog attach the dump file reported. Link to comment Share on other sites More sharing options...
Myriad Rocker Posted November 3, 2021 Share Posted November 3, 2021 (edited) Just popping in to say that this build fixed the issue I was having with setting up sidechains on aux tracks while also soloing them. Had a pretty similar use case to @Apeirofobia where I was trying to sidechain Waves F6 on my bass aux (dirty and di) with my kick aux (in, out, sample). Had them soloed while working on them. Prior to this build I couldn't get the sidechain to work and was beating my head against the wall. Thanks Noel!!! Excellent communication and tackling of the issue. Agile dev ops FTW. Edited November 3, 2021 by Myriad Rocker 1 Link to comment Share on other sites More sharing options...
Sidney Earl Goodroe Posted November 3, 2021 Share Posted November 3, 2021 Just had to rollback to version 09! Installed updates for Ozone 9 Advanced and scanned. Scanner broke! Tried everything to get the scan to complete . When it did complete my VST 3 plugs were not listed. Finally had to uninstall all the Izotope plugs, rollback Cakewalk to 09, reinstall Izotope plugins and all is good now. 2 days of lost time and nerve-wracking troubleshooting! No more experimenting for me! I am waiting on the full baked Cake from here on out!! Still love Cake and will continue to support it!! Link to comment Share on other sites More sharing options...
Andres Medina Posted November 3, 2021 Share Posted November 3, 2021 (edited) I think this is a bug: In this EA version, when using the new export window, the track name is not being updated using labels. I tried several times, and had to go back to 2021.09, and it works almost fine there (although when opening a previous project I had to manually erase first the labels on the export name and re-import the labels from a preset. Then it updated correctly the track name) Something is not working properly there. By the way: when exporting, using the Track Through Full Mix preset, the preview name that is displayed beneath the filename does not capture the real name in the track. Not sure if this is a bug, or is intended? I guess the preview should take the name from the actual track, right? in my case, the name is taken from a very old track name that may be was there when the first incarnation of the new export window arrived, and is stuck there in the preview text. Edited November 3, 2021 by Andres Medina Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 3, 2021 Share Posted November 3, 2021 4 hours ago, Sidney Earl Goodroe said: Just had to rollback to version 09! Installed updates for Ozone 9 Advanced and scanned. Scanner broke! Tried everything to get the scan to complete . When it did complete my VST 3 plugs were not listed. Finally had to uninstall all the Izotope plugs, rollback Cakewalk to 09, reinstall Izotope plugins and all is good now. 2 days of lost time and nerve-wracking troubleshooting! No more experimenting for me! I am waiting on the full baked Cake from here on out!! Still love Cake and will continue to support it!! This has absolutely nothing to do with the .11 release. The only changes in this release are some bug fixes and improvements for solo functionality Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted November 3, 2021 Share Posted November 3, 2021 50 minutes ago, Andres Medina said: I think this is a bug: In this EA version, when using the new export window, the track name is not being updated using labels. I tried several times, and had to go back to 2021.09, and it works almost fine there (although when opening a previous project I had to manually erase first the labels on the export name and re-import the labels from a preset. Then it updated correctly the track name) Something is not working properly there. By the way: when exporting, using the Track Through Full Mix preset, the preview name that is displayed beneath the filename does not capture the real name in the track. Not sure if this is a bug, or is intended? I guess the preview should take the name from the actual track, right? in my case, the name is taken from a very old track name that may be was there when the first incarnation of the new export window arrived, and is stuck there in the preview text. It's not intended to show the actual selected track name in this preview. It shows the first track in the project as an example of what the wildcards chosen will show. Link to comment Share on other sites More sharing options...
Recommended Posts