Will. Posted August 29, 2021 Share Posted August 29, 2021 (edited) 8 hours ago, Keni said: I need the clip in it's time location on the track, not the clip isolated... Oh! HIGHLIGHT the clip in the project SOLO IT and then SHIFT+L -- go up to export, expand RANGE choose Time Select (ed) - [ion] then click on the clock (or music note - not sure) and do the other steps above and EXPORT. Edited August 29, 2021 by Will_Kaydo Link to comment Share on other sites More sharing options...
Promidi Posted August 29, 2021 Share Posted August 29, 2021 I was actually liking the Effect bin menus having the dark background in build 95. I was kind of hoping this dark background could be used for the adding synth selection as well... (Same with the marker selection drop down in the marker console module) Any chance these can be exposed in the Theme Editor? 1 Link to comment Share on other sites More sharing options...
John T Posted August 29, 2021 Share Posted August 29, 2021 On 8/28/2021 at 2:51 PM, User 905133 said: Thanks for the borders when categories are expanded. Much easier to see the choices. Heh, I was literally just about to write a post asking for this. Great news. 2 1 Link to comment Share on other sites More sharing options...
Wong Jian Ming Posted August 30, 2021 Share Posted August 30, 2021 (edited) This is a great update especially the new export update will really save a lot of time! However I'm having some issues with my kontakt (midi) drum tracks actually speeding up (gradually) in relation to my audio tracks when exported... This does not happen when I'm using real-time bounce. Thinking its got something to do with the new bounce buffer size. edit: am using the latest build 99 Edited August 30, 2021 by Wong Jian Ming 1 Link to comment Share on other sites More sharing options...
Terry Kelley Posted August 30, 2021 Share Posted August 30, 2021 I tried the File/Export/Audio method and when set to what I thought was the right parameters for a total mix-down, it didn't. It created a 4kb file of nothing. I fiddled about and finally got a complete mix-down. I am not sure if I was stuck in the "random clip was select" hell but what would seem to be intuitive settings like Entire Mix didn't do it. I need to read more about this. Otherwise the early access version works. Link to comment Share on other sites More sharing options...
Morten Saether Posted August 30, 2021 Author Share Posted August 30, 2021 19 hours ago, Milton Sica said: I still want to understand why if we set ENTIRE PROJECT to record a task, this task is stored with the project time instead of actually doing what is parameterized, that is: being executed under the current conditions of the ENTIRE PROJECt. I understand that when we parameterize the ENTIRE PROJECT the task should MIRROR the ENTIRE PROJECT of the moment and not the moment the task was recorded. The "Entire Project" setting refers to the project duration, not the track selection. "Entire Project" means the same as having a duration of 0, which automatically selects the entire project duration. When using a task queue, "Entire project" always uses the current full duration of the project, not the duration when the task was created. Link to comment Share on other sites More sharing options...
Morten Saether Posted August 30, 2021 Author Share Posted August 30, 2021 2 minutes ago, Milton Sica said: In my operations, if I do this 10, 15 times the ENTIRE PROJECT of the task is always set as if the project was still from the first one. See if there is any automation data or other hidden events that could affect the project duration. If there are no other events that affects the duration, can you please send us a project that exposes the issue? 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted August 30, 2021 Share Posted August 30, 2021 28 minutes ago, Milton Sica said: Many thanks for the reply. I understood that ENTIRE PROJECT should do this by default, but in my tests so far, it seems to me, this option is not considered in the example situation. I have a project that I use only to MASTERIZE. I import the mixed WAV and run 2 tasks. One to generate MP3 and another WAV. Then, in this same project still open, I delete the previously imported Wav and import a new wav to generate the master WAV and MP3 of this new wav that I imported. The generation of the latter, even though ENTIRE PROJECT is configured in the task, instead of doing this configuration in the generation, it takes into account the first imported WAV. And this successively, because I take advantage of the same mastering project, where I import the mixed wav to master. In my operations, if I do this 10, 15 times the ENTIRE PROJECT of the task is always set as if the project was still from the first one. There is no task reset to actually run with the current project size. If you import a wav onto a NEW track that did not exist before this will not work because the tasks will not know about it. However if you import data onto pre existing tracks it should work. 1 Link to comment Share on other sites More sharing options...
Morten Saether Posted August 30, 2021 Author Share Posted August 30, 2021 1 hour ago, Milton Sica said: I don't have automation data in this project I use. There are only two lanes. One for parallel compression when needed. I'm not able to reproduce the issue in your project. Do you get the same results if you remove all plug-ins or start from a blank project? Are you able to record a short video that shows the problem? Link to comment Share on other sites More sharing options...
Terry Kelley Posted August 31, 2021 Share Posted August 31, 2021 I just did a rollback out of this early release. If I play a song, all tracks are in sync. When I export it to wave, some tracks are delayed by a couple of beats. Since it's fine when I play it inside Cakewalk, there isn't anything I can look at to figure out what is going on. I'll recheck it with the formal release but for now, I am back to 058. Link to comment Share on other sites More sharing options...
Will. Posted August 31, 2021 Share Posted August 31, 2021 2 hours ago, Terry Kelley said: I just did a rollback out of this early release. If I play a song, all tracks are in sync. When I export it to wave, some tracks are delayed by a couple of beats. Since it's fine when I play it inside Cakewalk, there isn't anything I can look at to figure out what is going on. I'll recheck it with the formal release but for now, I am back to 058. If this is related to the EA, kindly provide the development team the project where this issue occurred to diagnose the problem - otherwise this could carry over to the official release. 1 Link to comment Share on other sites More sharing options...
Olaf Posted August 31, 2021 Share Posted August 31, 2021 When exporting from the Control Bar, the export dialog is the old one. Link to comment Share on other sites More sharing options...
Will. Posted August 31, 2021 Share Posted August 31, 2021 5 minutes ago, Olaf said: When exporting from the Control Bar, the export dialog is the old one. Still a favorite [favourite.] ☺ Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted August 31, 2021 Share Posted August 31, 2021 1 hour ago, Olaf said: When exporting from the Control Bar, the export dialog is the old one. This is expected. Going to Advanced in the Export Module menu brings up the new dialog Link to comment Share on other sites More sharing options...
Terry Kelley Posted August 31, 2021 Share Posted August 31, 2021 (edited) 8 hours ago, Will_Kaydo said: If this is related to the EA, kindly provide the development team the project where this issue occurred to diagnose the problem - otherwise this could carry over to the official release. There's nothing is EA99 that I need at this moment so I will wait for the dust to settle and stick with 058. I tried advanced too but not every combination of buffer and other settings. I would like a setting that is effectively "Just Mix Down The Whole Damn Song As It Sounds Like When It Plays" without wondering if I need some setting tweaked to accomplish what the toolbar Export does - when it works. I get that to be able to export the various buses, clips, tracks, etc. to do some pretty slick stuff requires the dialog to be rather complex. But a "Just Mix Down the Damn Song" button would be cool too in the Advanced settings unless advanced effects the tool bar export. I haven't tried that yet. Edited August 31, 2021 by Terry Kelley 1 3 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted August 31, 2021 Share Posted August 31, 2021 11 hours ago, Terry Kelley said: I just did a rollback out of this early release. If I play a song, all tracks are in sync. When I export it to wave, some tracks are delayed by a couple of beats. Since it's fine when I play it inside Cakewalk, there isn't anything I can look at to figure out what is going on. I'll recheck it with the formal release but for now, I am back to 058. @Terry Kelley Rolling back without providing any info is not going to help us solve the issue you are running into before we release. Can you provide like to a small project that has this issue? By any chance are you using the export buffer size higher than your audio device buffer size. There is an issue we're investigating there. 4 1 Link to comment Share on other sites More sharing options...
Will. Posted August 31, 2021 Share Posted August 31, 2021 1 hour ago, Terry Kelley said: But a "Just Mix Down the Damn Song" button would be cool too ? I think its called "Entire Mix." It's not a button though, more like a drop down menu under the WHAT TO EXPORT section. ☺ and then under RANGE "Entire project." Link to comment Share on other sites More sharing options...
Xoo Posted August 31, 2021 Share Posted August 31, 2021 23 minutes ago, Will_Kaydo said: ? I think its called "Entire Mix." It's not a button though, more like a drop down menu under the WHAT TO EXPORT section. ☺ and then under RANGE "Entire project." And then make a preset for it ? Link to comment Share on other sites More sharing options...
Will. Posted August 31, 2021 Share Posted August 31, 2021 (edited) 6 minutes ago, Kevin Perry said: And then make a preset for it ? Like "cakewalk" (an easy victory/easy to achieve.) ? Edited August 31, 2021 by Will_Kaydo 1 Link to comment Share on other sites More sharing options...
Terry Kelley Posted August 31, 2021 Share Posted August 31, 2021 1 hour ago, Will_Kaydo said: ? I think its called "Entire Mix." It's not a button though, more like a drop down menu under the WHAT TO EXPORT section. ☺ and then under RANGE "Entire project." I want button damn it! Sorry for the incorrect terminology. Link to comment Share on other sites More sharing options...
Recommended Posts