Prem Posted July 22, 2021 Share Posted July 22, 2021 I'm using cakewalk a300 pro midi keyboard, In a project I've added Cakewalk TTS1 and other synth. I'm using all 16 channels of tts1. For arrangement I've drawn notes and when I'm playing with my midi keyboard A300 pro, sometimes TTS1 goes mute or hangs with a continuous note play. Same is not the case with any other synth, so no prob with the midi keyboard. TTS 1 is the only synth with one instance I can have 16 channels of different instrument. Link to comment Share on other sites More sharing options...
mgustavo Posted July 23, 2021 Share Posted July 23, 2021 Hi, PremJ Hans! I've had this kind of issue while using TTS-1 mainly if there are tempo changes on the project as well as a loop selection. If you could check if is that the same situation I guess it's a known issue. Also this soft synth is a DXi type which is not being supported anymore, as I read on this forum. However there are many options recommended on the Instruments & Effects forum, including the Yamaha S-YXG50, which is similar to TTS-1 as it is 16 channel GM plugin (see the Freeware Instruments Thread ). 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted July 23, 2021 Share Posted July 23, 2021 DXi’s are still supported by Cakewalk. TTS1 is a legacy product that is no longer maintained by roland so we don’t have the means to update it or fix problems. 3 1 Link to comment Share on other sites More sharing options...
mgustavo Posted July 23, 2021 Share Posted July 23, 2021 Hi, @Noel Borthwick ! Sorry for my post and thanks for the information! Actually I was going to write that "it's not being developed anymore" and changed the word on the last minute, but with small knowledge about the issue. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted July 23, 2021 Share Posted July 23, 2021 No problem Link to comment Share on other sites More sharing options...
Prem Posted July 24, 2021 Author Share Posted July 24, 2021 17 hours ago, mgustavo said: Hi, PremJ Hans! I've had this kind of issue while using TTS-1 mainly if there are tempo changes on the project as well as a loop selection. If you could check if is that the same situation I guess it's a known issue. Also this soft synth is a DXi type which is not being supported anymore, as I read on this forum. However there are many options recommended on the Instruments & Effects forum, including the Yamaha S-YXG50, which is similar to TTS-1 as it is 16 channel GM plugin (see the Freeware Instruments Thread ). ok! its a scoring project with tempo changes and yes I loop sections to compose. If its a known issue then nothing can be done. Thanks Link to comment Share on other sites More sharing options...
abacab Posted July 24, 2021 Share Posted July 24, 2021 15 hours ago, PremJ Hans said: ok! its a scoring project with tempo changes and yes I loop sections to compose. If its a known issue then nothing can be done. Thanks If you need 16 channels in a plugin, then either NI Kontakt 6, or IK SampleTank 4 would accommodate that, provided that you can live without GM compatibility. The free Kontakt 6 Player will run many of the various instrument sample library titles published by NI in the NI store. If you still need GM. the Roland cloud has a virtual GM module ROMpler plugin, the Sound Canvas VA, that you can buy a license for. 2 Link to comment Share on other sites More sharing options...
Prem Posted July 27, 2021 Author Share Posted July 27, 2021 (edited) On 7/25/2021 at 3:25 AM, abacab said: If you need 16 channels in a plugin, then either NI Kontakt 6, or IK SampleTank 4 would accommodate that, provided that you can live without GM compatibility. The free Kontakt 6 Player will run many of the various instrument sample library titles published by NI in the NI store. If you still need GM. the Roland cloud has a virtual GM module ROMpler plugin, the Sound Canvas VA, that you can buy a license for. I use light weight 16 channel GM like TTS1 for preparing a initial structure, as its lightweight and doesn't occupies too much of ram. But I don't finalize my project with TTS1. I replace it with good sounding instruments VST's and then bounce it to audio. Like I can create orchestral structure through midi notes and then later replace TTS1 brass layer with Spitfire brass. Edited July 27, 2021 by PremJ Hans Link to comment Share on other sites More sharing options...
abacab Posted July 27, 2021 Share Posted July 27, 2021 53 minutes ago, PremJ Hans said: I use light weight 16 channel GM like TTS1 for preparing a initial structure, as its lightweight and doesn't occupies too much of ram. But I don't finalize my project with TTS1. I replace it with good sounding instruments VST's and then bounce it to audio. Like I can create orchestral structure through midi notes and then later replace TTS1 brass layer with Spitfire brass. But you said earlier that TTS-1 no longer works correctly with your workflow. And since it is no longer maintained by Roland, you will need a replacement, correct? 1 Link to comment Share on other sites More sharing options...
Prem Posted July 27, 2021 Author Share Posted July 27, 2021 3 hours ago, abacab said: But you said earlier that TTS-1 no longer works correctly with your workflow. And since it is no longer maintained by Roland, you will need a replacement, correct? Yes I am facing issue with my current project because it has many tempo changes and as pointed by mgustavo, its a known issue that if your project has too many tempo changes. I did mention in post when I'm playing with my midi keyboard A300 pro, sometimes TTS1 goes mute or hangs with a continuous note play. But there are no issues with drawing notes or playing drawn notes on piano roll I'm aware of Native Instrument and Spitfire freeware's. And for TTS1 there's no separate client agent thread running in the background, like if I'm not mistaken, there's NI agent thread runs in background in processes for Native Instruments. Link to comment Share on other sites More sharing options...
abacab Posted July 28, 2021 Share Posted July 28, 2021 (edited) 8 hours ago, PremJ Hans said: I'm aware of Native Instrument and Spitfire freeware's. And for TTS1 there's no separate client agent thread running in the background, like if I'm not mistaken, there's NI agent thread runs in background in processes for Native Instruments. The Roland Sound Canvas VA plugin is probably the closest GM plugin to TTS-1. You can buy a lifetime license for the Roland Sound Canvas VA (GS/GM) plugin for USD $69 through the Roland Cloud (free version, no subscription required). Edited July 28, 2021 by abacab Link to comment Share on other sites More sharing options...
Byron Dickens Posted July 28, 2021 Share Posted July 28, 2021 (edited) Me? If an ancient, obsolete, no-longer-supported GM synth wasn't working for me I would just ditch it and move on with my life. There must be 400,000 GM sound sets out there. Edited July 28, 2021 by bdickens Link to comment Share on other sites More sharing options...
57Gregy Posted July 28, 2021 Share Posted July 28, 2021 I liked Proteus VX way back when. I see that it's still available, but didn't search to see if it's 64-bit. That may not be a problem nowadays? It had some cool sounds. Link to comment Share on other sites More sharing options...
rfssongs Posted July 29, 2021 Share Posted July 29, 2021 I have had problems on a less robust computer while playing too many notes or playing too fast with some soft synth's . How old is your machine ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now