iZiKKO Posted March 25, 2019 Share Posted March 25, 2019 (edited) Hi guys. Fading is easy on Cakewalk IF you have just a regular audio track. BUT, if you have a midi or instrument track it gets more complicated. What is your easiest, or preferred method of fading in and out on midi tracks? This is a beginner question, so please explain this as you would explain it to your grandmother Edited March 25, 2019 by iZiKKO Link to comment Share on other sites More sharing options...
msmcleod Posted March 25, 2019 Share Posted March 25, 2019 I tend to use instrument tracks, so I'll fade that out the same way as any other audio track. For multi-timbral VSTi's, I either: Make sure the VSTi is sending to multiple outs, and do the fade automation on the relevant audio track; or Record the controller information for either CC #7 (volume), or CC #11 (expression) depending on how the VSTi (or hardware MIDI device) reacts. The Roland "D" series sound modules (D110, D50, U110) for example, don't react to CC #7 in realtime - i.e. existing notes stay the same, and the new volume only takes effect when the next note is played. CC #11 can however be used to affect the volume for notes that are already playing. 1 Link to comment Share on other sites More sharing options...
iZiKKO Posted March 25, 2019 Author Share Posted March 25, 2019 11 minutes ago, msmcleod said: I tend to use instrument tracks, so I'll fade that out the same way as any other audio track. Mate, regular "drag" fading does not seem to work on Instruments tracks either? 1 Link to comment Share on other sites More sharing options...
msmcleod Posted March 25, 2019 Share Posted March 25, 2019 10 minutes ago, iZiKKO said: Mate, regular "drag" fading does not seem to work on Instruments tracks either? Ah - ok, I see what you mean. I normally do it as automation: 1 2 Link to comment Share on other sites More sharing options...
iZiKKO Posted March 25, 2019 Author Share Posted March 25, 2019 38 minutes ago, msmcleod said: I normally do it as automation: Brilliant! Automation it is! Thank you for your help, mate! Link to comment Share on other sites More sharing options...
ChernobylStudios Posted March 25, 2019 Share Posted March 25, 2019 You can also right-click on the automation itself and select faster or slower curves that'll mimic the audio slopes. 1 1 Link to comment Share on other sites More sharing options...
sjoens Posted May 8, 2019 Share Posted May 8, 2019 (edited) Instrument track clips behave like MIDI clips until frozen, then they behave like audio clips. So you have 3 choices. 1. Add volume cc's in PRV (MIDI clip) (works only if softsynth responds to cc data) 2. Add a volume envelope or Automation (MIDI & Audio clips) 3. Real time fade (Audio/Frozen clips) - This one can be permanently applied to the clip by bouncing it. Edited May 8, 2019 by sjoens 1 Link to comment Share on other sites More sharing options...
iZiKKO Posted May 9, 2019 Author Share Posted May 9, 2019 Thank you guys for all these good tips! Re. fading with automation tracks have you noticed if they use lots of CPU? Link to comment Share on other sites More sharing options...
Mánibranðr Studios Posted May 23, 2019 Share Posted May 23, 2019 You'd be better off if you use Expression instead since Expression scales off of the Volume, which will make it easier if you need to do an overall adjust on the track's loudness. 2 Link to comment Share on other sites More sharing options...
Tree's Studio Posted June 9, 2020 Share Posted June 9, 2020 From the original post, easy or preferred. He's familiar with audio fading from his description and pic of his faded in/out audio track. It really depends, but easiest is a single click on the tracks freeze icon, then it's business as usual for fading in/out. If you have effects in the effects rack, it gets more complicated, but certainly early on in the recording/creative part of song development, if you just want a super fast way to fade a midi clip, this is what I use. As you can see in this clip from page 841 of the May 2020 Cakewalk Reference Guide (English version), is tells you the effects don't work in a track if it's frozen. On my DAW pic, the freeze icon is active which is why the former midi clip in green now looks like an audio clip (because it is until you unfreeze the clip/track) Good luck. 1 Link to comment Share on other sites More sharing options...
JayKayVN Posted September 14, 2021 Share Posted September 14, 2021 I love how the original poster said "explain it like you were explaining it to your grandmother" and mscleod (who says he's staff) responds with: Quote "multi-timbral VSTi's, I either: Record the controller information for either CC #7 (volume), or CC #11 (expression) depending on how the VSTi (or hardware MIDI device) reacts. The Roland "D" series sound modules (D110, D50, U110) for example, don't react to CC #7 in realtime " Full of jargon!! And this guy is a representative of Cakewalk!! This doesn't bode well for others looking to choose a DAW. 1 Link to comment Share on other sites More sharing options...
Glenn Stanton Posted September 14, 2021 Share Posted September 14, 2021 2 hours ago, JayKayVN said: Full of jargon!! And this guy is a representative of Cakewalk!! This doesn't bode well for others looking to choose a DAW. dealing with intricacies of MIDI often require some details... the OP seemed happy with the original response - use automation. now they're at the point of finding the optimal or alternative MIDI CC which do this best... 2 Link to comment Share on other sites More sharing options...
Byron Dickens Posted September 14, 2021 Share Posted September 14, 2021 4 hours ago, JayKayVN said: I love how the original poster said "explain it like you were explaining it to your grandmother" and mscleod (who says he's staff) responds with: Full of jargon!! And this guy is a representative of Cakewalk!! This doesn't bode well for others looking to choose a DAW. If you're going to be doing this, you had best learn some "jargon" or you will be hopelessly lost. BTW, the clear, concise reply you're complaining about is called "technical language," not "jargon." There is a difference. Link to comment Share on other sites More sharing options...
Stephen Power Posted April 1, 2023 Share Posted April 1, 2023 On 3/25/2019 at 8:13 AM, iZiKKO said: ....so please explain this as you would explain it to your grandmother My grandmother has a Ph.D in computer science and is Professor Emeritus at Salisbury University. So, she would probably explain it better to me. 1 1 Link to comment Share on other sites More sharing options...
Pelle Andersson Posted January 15 Share Posted January 15 On 3/25/2019 at 9:55 AM, msmcleod said: Ah - ok, I see what you mean. I normally do it as automation: http://msmcleod.co.uk/cakewalk/volume_fade.gif Thanks! Perfect! ?? Link to comment Share on other sites More sharing options...
Bristol_Jonesey Posted January 15 Share Posted January 15 On 9/14/2021 at 1:16 PM, JayKayVN said: I love how the original poster said "explain it like you were explaining it to your grandmother" and mscleod (who says he's staff) responds with: Full of jargon!! And this guy is a representative of Cakewalk!! This doesn't bode well for others looking to choose a DAW. GREAT first post ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now