filo Posted December 11, 2020 Share Posted December 11, 2020 (edited) https://www.kuassa.com/products/amplifikation-clarent/ $25 intro price Edited December 11, 2020 by filo 3 1 Link to comment Share on other sites More sharing options...
Christian Jones Posted December 12, 2020 Share Posted December 12, 2020 I'm the only one who cares about this lol Link to comment Share on other sites More sharing options...
Craig Fowler Posted December 12, 2020 Share Posted December 12, 2020 Could be interesting...As much as I like Nembrini and some IK gear, Kuassa stuff is just so easy to get good sounds out of. Link to comment Share on other sites More sharing options...
Craig Fowler Posted December 12, 2020 Share Posted December 12, 2020 And dangit if the demos don't sound great, too! Link to comment Share on other sites More sharing options...
mibby Posted December 13, 2020 Share Posted December 13, 2020 I was planning on picking up some Kuassa stuff this season but got distracted on other bargains. I really enjoy the sound and simplicity of A360. I also like that I won't have to sell my first born when I'm ready to pick up more of their stuff... 2 1 Link to comment Share on other sites More sharing options...
telecode 101 Posted December 13, 2020 Share Posted December 13, 2020 I like Orange amp sims. I have IKM though. Hoping AT 5 breathes new life into it. 1 Link to comment Share on other sites More sharing options...
filo Posted December 13, 2020 Author Share Posted December 13, 2020 (edited) 14 hours ago, Christian Jones said: I'm the only one who cares about this lol Not the only one I have tried I think all amp sims on the market and have found the Kuassa amps most suitable for me (sound/CPU/price). I don't need extra hi-gain stuff so I have bought Caliburn and Matchlock at first and a new Clarent is on my radar already in my arsenal too. I'm not a huge fan of their cab sim but external IR works very well. One interesting KVR comment about Clarent from their factory player Dimi: One good practice is to keep your master at moderate level. The tone stack is more responsive and not buried by the saturation of the power amp section. It works like in the real world. Also too much pre-amp gain will affect how the tone stack works. The brightness of the amps is not a hard thing. Play with the mics position and keep it more to the center of the cone. Edited December 13, 2020 by filo 3 Link to comment Share on other sites More sharing options...
Tezza Posted December 13, 2020 Share Posted December 13, 2020 (edited) I use Kuassa amps and pedals, I like them, mainly for a clean or light distortion sound. Only one thing bugs me about them, the way they show up in my DAW with Amplifikation and Efektor in front of the name, I can't see which amp or pedal it is because those terms take up all the room in my FX slots. This is really annoying, means I have to click to find out what it is. I have complained to them directly about it but got no reply. Kuassa is such a cool name, I don't know why they don't use that instead. It also looks amateurish "Amplifikation Vermillion" instead of something like "Kuassa V" or "Efektor CH3604" instead of "Kuassa Chorus". So irritating. It does affect whether I use them because something like "S-Gear" or "Guitar Rig" fits so nicely in my DAW FX slots and it's so easy to know what it is and where to find it. That's the other thing, the pedals and amps install under different categories in Cubase, Vermillion installs under "Distortion" and Matchlock installs under "Other". It happened to me today. I was working on a song that has a number of guitar parts and came up with another simple finger picking part while playing the electric. I bought up the midi roll to transcribe the part into midi, put an electric sampler in there and then grabbed an amp. I went straight to S-Gear because it's easy to find and shows up easily in my DAW FX slots. I actually wanted to use a Kuassa amp but in the heat of the moment, with a guitar hanging on me and one hand holding that and with a number of other guitar tracks already there, I didn't want to fumble around trying to find and identify things. I might try out a Kuassa amp on the material later. I wouldn't get the Clarent amp (I might try it) but that is only because I don't have a guitar that I think would be good for it, I use a fender strat with low output pickups. Edited December 13, 2020 by Tezza 4 Link to comment Share on other sites More sharing options...
mibby Posted December 13, 2020 Share Posted December 13, 2020 (edited) 5 hours ago, Tezza said: I use Kuassa amps and pedals, I like them, mainly for a clean or light distortion sound. Only one thing bugs me about them, the way they show up in my DAW with Amplifikation and Efektor in front of the name, I can't see which amp or pedal it is because those terms take up all the room in my FX slots. This is really annoying, means I have to click to find out what it is. I have complained to them directly about it but got no reply. Kuassa is such a cool name, I don't know why they don't use that instead. It also looks amateurish "Amplifikation Vermillion" instead of something like "Kuassa V" or "Efektor CH3604" instead of "Kuassa Chorus". So irritating. It does affect whether I use them because something like "S-Gear" or "Guitar Rig" fits so nicely in my DAW FX slots and it's so easy to know what it is and where to find it. That's the other thing, the pedals and amps install under different categories in Cubase, Vermillion installs under "Distortion" and Matchlock installs under "Other". It happened to me today. I was working on a song that has a number of guitar parts and came up with another simple finger picking part while playing the electric. I bought up the midi roll to transcribe the part into midi, put an electric sampler in there and then grabbed an amp. I went straight to S-Gear because it's easy to find and shows up easily in my DAW FX slots. I actually wanted to use a Kuassa amp but in the heat of the moment, with a guitar hanging on me and one hand holding that and with a number of other guitar tracks already there, I didn't want to fumble around trying to find and identify things. I might try out a Kuassa amp on the material later. I wouldn't get the Clarent amp (I might try it) but that is only because I don't have a guitar that I think would be good for it, I use a fender strat with low output pickups. When you say "directly", was it to support? I wonder if you'd have better luck on the KVR forum? I've seen him reply there a few times at least. I'd think your request would be super helpful and add a huge part to their usability. I mean, they've done the hard part - getting a good sound and making the VST user friendly. Now it's just a matter of renaming it to make it more readily accessible! Edited December 13, 2020 by mibby 3 Link to comment Share on other sites More sharing options...
Grem Posted December 13, 2020 Share Posted December 13, 2020 6 hours ago, Tezza said: I went straight to S-Gear because it's easy to find and shows up easily in my DAW FX slots. I actually wanted to use a Kuassa amp but in the heat of the moment, with a guitar hanging on me and one hand holding that and with a number of other guitar tracks already there, I didn't want to fumble around trying to find and identify things. Go to the KVR forum for Kuassa and tell them this story. Explain it like you did here. Devs want to know about actual case use. They get so caught up in programming that they have a tendency not to see the forest because of the trees. This maybe because of a little known vst spec in the code that they are not aware of. It also maybe something to do with you DAW that they are unaware of. 2 1 Link to comment Share on other sites More sharing options...
Christian Jones Posted December 13, 2020 Share Posted December 13, 2020 @Tezza yes tell Kuassa this on kvr because now that you mention it it does kinda suck 3 Link to comment Share on other sites More sharing options...
Grem Posted December 13, 2020 Share Posted December 13, 2020 2 hours ago, Christian Jones said: @Tezza yes tell Kuassa this on kvr because now that you mention it it does kinda suck Yes it does!!! 1 Link to comment Share on other sites More sharing options...
Tezza Posted December 13, 2020 Share Posted December 13, 2020 That KVR forum is pretty big, I am not a member there but I have read posts there. At first glance, I didn't see the developers listed, I joined and posted a similar post to the one I posted here. I don't hold out much hope about anything being changed though because they have invested so much into these Amplifikation and Efektor names. 1 Link to comment Share on other sites More sharing options...
Grem Posted December 14, 2020 Share Posted December 14, 2020 11 hours ago, Tezza said: I joined and posted a similar post to the one I posted here. Well at least they responded. Gotta give 'em props for that. Link to comment Share on other sites More sharing options...
Christian Jones Posted December 14, 2020 Share Posted December 14, 2020 7 hours ago, Grem said: Well at least they responded. Gotta give 'em props for that. They responded? When will they do what we want? Link to comment Share on other sites More sharing options...
Tezza Posted December 14, 2020 Share Posted December 14, 2020 (edited) I think the response by Dimi was more of a polite, generic response "Thanks for the comment and the suggestion! I will forward it to the development team". He will most likely pass it on, but as I said before, they would have to change a lot to incorporate the suggestion. I cannot see them prioritizing this issue, so I don't hold out much hope that anything will change. It might get some more support on the KVR forum, see what happens. Thanks for voting it up on the kVR forum! Edited December 15, 2020 by Tezza 1 Link to comment Share on other sites More sharing options...
rcklln Posted January 4, 2021 Share Posted January 4, 2021 Been using the demo and just picked it up on sale at Plugin Boutique for about $20 with some virtual cash I had. Sounds great! ? Link to comment Share on other sites More sharing options...
marcL Posted January 4, 2021 Share Posted January 4, 2021 On 12/13/2020 at 11:38 AM, Tezza said: Only one thing bugs me about them, the way they show up in my DAW with Amplifikation and Efektor in front of the name, I can't see which amp or pedal it is because those terms take up all the room in my FX slots. I do not understand why CbB does not show the name from the personal plugin layout in the FX slots! ☹️ This is especially annoying when you have the same plugin in multiple versions or as you said different plugins with the same prefix. Choosing the plugin is fine, but afterwards you cannot see it quickly! Concerning long plugin names Kuassa is not the only example! Therefore it would be cool if it was changable in the DAW(s)! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now