Emanuel Vella Posted May 16, 2020 Share Posted May 16, 2020 Maybe I sound stupid, In Bandlab if I have an audio track and I want to change it from stereo to mono, where is the button? I find it only in bus tracks! Link to comment Share on other sites More sharing options...
scook Posted May 16, 2020 Share Posted May 16, 2020 If the interleave button is not visible on the track it is either due to a workspace or this drop down in the track view (red box in image below). The interleave button is always displayed in an audio track inspector. Just above "E" in the image below Link to comment Share on other sites More sharing options...
Emanuel Vella Posted May 16, 2020 Author Share Posted May 16, 2020 Ok after following your help and selecting "All" for the audio track I got it. But If add track/Instrument/Create the stereo/mono button still not showing. Link to comment Share on other sites More sharing options...
scook Posted May 16, 2020 Share Posted May 16, 2020 That's right Instrument tracks do not have an interleave button. This is one of the few differences between instrument tracks and the audio and MIDI tracks used to create it. All of the controls are available when the instrument track is split into its audio/MIDI track pair. The "Split Instrument Track" function is available on the track header context menu. Right-click the instrument track header for this menu. Link to comment Share on other sites More sharing options...
Emanuel Vella Posted May 16, 2020 Author Share Posted May 16, 2020 Ok Scook thanks very much for your help. Link to comment Share on other sites More sharing options...
gustabo Posted March 1 Share Posted March 1 4 hours ago, AlexBacki said: If you want to change an audio track from stereo to mono, you can follow these steps: Select the Track: Click on the track you want to modify. Ensure that the track is highlighted or selected. Open the Inspector: Look for the "Inspector" tab on the left side of the screen. If it's not visible, you can open it by clicking the "View" menu at the top and selecting "Inspector." Adjust Channel Configuration: In the Inspector, there should be an option for "Channel Configuration" or a similar term. Within this section, you can change the track from stereo to mono. There might be a dropdown menu or options for configuring the channels. Set to Mono: Once you've located the Channel Configuration settings, select "Mono" or set the number of channels to 1, depending on the interface BandLab provides. If you're having trouble finding these options or if BandLab's interface has been updated since my last training data in January 2022, I recommend checking BandLab's official documentation or community forums for the most up-to-date information. Feel free to ask if you have any more questions or need further assistance! Good job resurrecting an almost 4 year old thread... Link to comment Share on other sites More sharing options...
Glenn Stanton Posted March 1 Share Posted March 1 4 hours ago, AlexBacki said: If you're having trouble finding these options or if BandLab's interface has been updated since my last training data in January 2022, I recommend checking BandLab's official documentation or community forums for the most up-to-date information. Feel free to ask if you have any more questions or need further assistance! autobot Link to comment Share on other sites More sharing options...
Terry Kelley Posted March 1 Share Posted March 1 And if anyone does a search for this same question they will have the benefit of AlexBacki adding a solution even if it is a couple of years later. I appreciate that and it keeps the answers in one thread. Link to comment Share on other sites More sharing options...
Glenn Stanton Posted March 2 Share Posted March 2 HAL, please open the pod doors. 1 Link to comment Share on other sites More sharing options...
Bristol_Jonesey Posted March 2 Share Posted March 2 1 minute ago, Glenn Stanton said: HAL, please open the pod doors. I'm sorry Dave, I can't do that Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now