-
Posts
9,681 -
Joined
-
Last visited
-
Days Won
27
Everything posted by scook
-
X32 USB & Cakewalk won't work, please read this!!!
scook replied to Steve Campbell's topic in Cakewalk by BandLab
If you wish to use the RealTek chip you have a couple of choices 1. Leave ASIO configured for your primary interface and use WASAPI Shared or Exclusive driver mode (Preferences > Audio > Playback and Recording) when running the RealTek or 2. Deselect all input and output drivers in Preference > Audio > Devices before making new input/output selections. Then review the rest of the audio configuration to verify it picked up the device change and all the device specific settings are correct. -
The size is just fine. More importantly, good job.
-
That's OK, the bit setting in Windows does not affect the DAW. There is no setting in Windows to select the driver. The driver selection is made by the program needing to talk to the device. Most Windows programs do not use ASIO instead relying on native Windows drivers. ASIO drivers are mostly used by audio and video tools. Some web browsers can use ASIO too. The choice of driver, if there is one, is part of the program setup like it is in CbB.
-
Presonus Drivers Not Recognized by Cakewalk
scook replied to fret walker's topic in Cakewalk by BandLab
The timing master drop down entries correspond to the currently selected devices in Preferences > Audio > Devices -
Presonus Drivers Not Recognized by Cakewalk
scook replied to fret walker's topic in Cakewalk by BandLab
The message looks suspicious to me McAfeer? On the CbB side, it is normal for one ASIO driver to be enabled at a time. To change drivers, deselect BOTH the current input AND output settings THEN make new selections. Only one driver may be selected at a time. -
MIDI latency problem, ... but in just one project?!
scook replied to A Tolerable Quietude's topic in Cakewalk by BandLab
Another approach if one has to record late in the process is bounce the project down to a scratch track archive everything except the scratch track (bypass FX on the master bus if any) record new stuff once the recording is done unarchive all the working tracks/buses (enable FX on the master bus if any) archive or delete the scratch track -
Presonus Drivers Not Recognized by Cakewalk
scook replied to fret walker's topic in Cakewalk by BandLab
I would normally respond to this Deselect both input and output in CbB Audio driver preferences BEFORE making a new selection. But this Leads me to suspect a much bigger problem with system configuration. Why would there ever be two firewalls running? One is enough to mess with installers. -
MIDI latency problem, ... but in just one project?!
scook replied to A Tolerable Quietude's topic in Cakewalk by BandLab
The delay is likely due to audio buffering. The buffers you have control over are the Mixing Latency settings in Preference > Audio > Device Settings (or software supplied by the hardware manufacture) and Plug-in Delay Compensation - some plug-ins require time for processing. The DAW uses PDC to keep everything in sync. Toggle the FX button in the Mix Module. as a quick test for PDC induced latency. If bypassing FX noticeably reduces latency, then one or more plug-ins somewhere in the project are the cause. Usual suspects are dynamics processors and IR-based reverbs. Consider temporarily bypassing the plug-ins or replacing them with less resource intensive plug-ins during recording. Also review the PDC button page. -
How Will The Forum Handle Cakewalk Next & Sonar Products?
scook replied to Jim Fogle's topic in Feedback Loop
it's a problem today -
How Will The Forum Handle Cakewalk Next & Sonar Products?
scook replied to Jim Fogle's topic in Feedback Loop
I am sure @Jesse Jost already has a plan AFAIK Cakewalk has never had a beta rollout like Next -
Did you update the image url? I left the old url in there just in case .
-
CbB 2022.11 & 2021.12 SONAR 2017.10 SONAR X3 SONAR X2 all seem OK now I no longer have MC installed thanks
-
just received email from staff they are working the issue will keep you posted
-
yeah, web help looks broken ATM
-
Pretty sure clip fades were similar in X1 https://legacy.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Arranging.69.html#1472327
-
In the future, please post requests like this in the Feedback Loop section of this forum. Thanks
-
Older Cakewalk/Sonar projects with new Sonar?
scook replied to Codefreq's topic in Cakewalk by BandLab
Yes -
801 - Tomorrow Never Knows
-
Thanks The OP has a bad scan path defined in CbB Preference > File > VST Settings If you need help cleaning up the scan path post an image your VST Settings The scan path should only contain paths with VST2 and VST3 plug-ins. Every folder in the scan path is searched for plug-ins not just the top level provided in preferences.