Robert Bone

Are you talking about that weird little chirpy lead sound, or the pad sounds underneath everything else? There are about a dozen additional people credited on that track, playing all kinds of different instruments and some backing vocals... In the video, I see a Prophet, and a Kronos - and I guess the guy plays that weird lead sound on the Kronos. It is a bit hard to figure out because they aren't really playing what we are hearing.

YUP - fingers and brain are still kind of working, so I have THAT going for me.

AHA AHA AHA AHA! NOW I get it - (I have understood all along - I just mean I figured out why I had nothing happen when I would press the bound key). SOOOOO - I had used an out of the way key in my original binding to the View the Plugins shortcut. The key I used was the '~' key. But, as luck would have it, I am blind as a bat these days, and even though I correctly bound that very same '~' key to the shortcut, well, it turns out that my grizzled gaze couldn't tell that I needed to use the $(*@$(*)*&& SHIFT key to actually click the '~' key - I couldn't see that it was some other stupidly small character I haven't seen in probably a good 30 years...... I found this because just for grins, I used a different key combo CTRL+J to be the bound to View the Plugins, and then it started working - dutifully pulling up or collapsing the Synth Rack's loaded plugins. So, I then went back to my original key the elusive '~' key. THIS time, I literally put the computer keyboard up close enough to where I could make out that I would need to hit the Shift key to actually click on the '~' key, so it had been working all along, and I apparently just went ahead and aged a bit, and well, that's what happened..... After lamenting my turning 60 recently, I can indeed say I am no longer in the Dunno camp, regarding View the Plugins. Of course, all of this typing has worn me out, so I think I shall curl up with the cats, and surrender to a nap. Bob Bone

Sure - except I do not see any such result - I see absolutely nothing happen when I press the bound key - and I triple-checked that I am pressing the key I bound to the View the Plugins shortcut. So - I remain Dunno - perhaps even Double Dunno. Bob Bone

Well, I still am in the Dunno camp - as I still have no idea what the View the Plugins keyboard shortcut does - so please tell me how to get it to do something when I click on the keyboard key I bound to it. I was also aware of the plug-in manager being external these days, I just was trying anything I could think of to see if I could see if View the Plugins did anything. I was flailing - Thanks, I will sleep better tonight, knowing the answer to this. Bob Bone

I was intrigued by this post, and spent some time this morning trying to figure it out. I came up empty. I bound a key to View the Plugins, and applied the change, and even cycled CbB, and launched a project with some plugins, and even tried it from within the Cakewalk Plug-in Manager. I could find no circumstance where that shortcut key I bound to View the Plugins visually or objectively did anything. I also searched both the documentation and did a Google search on: Cakewalk "View the Plugins" and got zero results. So - my answer to your post is currently : "Dunno" That's going to bug me - because I don't like to be in a state of "Dunno". (hopefully, someone smarter than me will explain View the Plugins) Bob Bone

Gotcha - Check out their demo, in the meantime, just to figure out if is something to go after, someday. Bob Bone

Check this one out - Simon Grove, from Plini's band, uses this plugin, and it sounds great - WAY more to it than the demo examples sound: This also has a 14-day trial. https://neuraldsp.com/products/darkglass-ultra-plugins/ Bob Bone

Oops - I missed seeing that. OK then - I dunno I looked to see if they offered a demo version, but there does not seem to be one available, yet. Bob Bone

You could also temporarily move the VST 3 version off to a different folder outside the scan path used by CbB, or just temporarily rename it within its current location in C://Program Files/Common Files/VST3 etc... (not sure if it would be in a sub-folder to that, or not, so once in the VST3 sub-folder, you might have to look for it). You could rename it back to its original name, following the test of the VST2 version, or move it back into its sub-folder in the Common File/VST3 original location (wherever you had found it). Bob Bone

Try using the VST 2 version, not the VST 3 one that CbB uses by default. You might have to remove the check from the parameter in Preferences that, by default, is set to hide VST 2 plugins when there is also a VST 3 version of the same plugin available. Sometimes, VST 3 plugins act a bit unstable, but the VST 2 version works fine - that may be the case here. Certainly worth a quick test. Bob Bone

Well played, Vlada - wait 'em out. hee hee (I hope it all works out painlessly for you - considering all the long-distance trauma you and I have been through over the years, trying to get things configured and working properly, let's hope this one is an easy one) Bob Bone

And the Native-Instruments Kontakt 6 was on sale - full version for $199, but I think that ended yesterday. Anyways, they also offer a 'lite' collection of sounds for free, in a collection called Komplete Start. It has subsets of sounds from several of their synths. There is also separate free 'players', which are lite versions of their flagship products - there is a Kontakt 6 Player (the full version of Kontakt is their flagship sampler), a Reaktor 6 Player, and a Guitar Rig 5 Player, and they have some additional synths and effects that are also completely free. Here is the link to their free stuff: https://www.native-instruments.com/en/catalog/free/ If memory serves, there are some libraries out on the web that work with the Kontakt 6 Player, that are free - don't quote me on this though, because I have used the full Kontakt for many many years, and only dimly recall possibly seeing some free libraries that indicated they would work with the free player. In any case, their free stuff is, well, free, so you cannot really go wrong to check it out. They obviously hope you fall in love with the software and sounds, and upgrade to the full version of their products - I have LONG considered Kontakt my absolutely go to plugin, and is in just about every single one of my projects, usually producing sounds for multiple instruments at a time. EastWest Play is another big commercial sample engine, and there are literally thousands and thousands of instruments/sounds available for it, but I actually almost always found what I wanted within my pretty sizable set of Kontakt libraries (I own Komplete 12 Ultimate, and separately picked up almost all the additional libraries that if from a single bundle would match their Komplete 12 Collector's Edition). Anyways, I had spent about $500 a year for the EastWest libraries, to get their Composer Cloud Plus or X or whatever their premier version of it was - that came with sounds all sampled at 48k x 24-bit, rather than their standard Composer Cloud - which was sampled at 44.1k and 16-bit. I did not renew my subscription to the EastWest sounds, but perhaps you would like them. I consider Kontakt to be rock-solid, and the best sampler on the market. That TX16Wx is also mighty good - particularly for free. Bob Bone

There is a free sampler out there TX16Wx, and Kontakt is on sale right now, as are other software collections, such as the V Collection from Arturia. There is also a boatload of sounds in the Korg Wavestation and M1, and the M1 comes with not only every single M1 factory sound on any expansion card (like 17 of them if memory serves), it also can play (and comes with) the complete T1 series of sounds, because both the M1 and the T1 used the same sound engine. https://www.korguser.net/Login.asp?LAN=1&main=101 (Korg M1 page - not sure if they have a free trial or not - I happen to love it) Native Instruments has a free Kontakt Player that has a few sounds in it, as part of their starter collection: https://www.native-instruments.com/en/products/komplete/bundles/komplete-start/ Bob Bone

You can also save it as a Project Template, and it will save all of the buses, routing assignments, tracks, plugins, effects, and settings - just no recorded data. I have several such Project Templates, which I use and view as an overall set of stuff to bring in. I also have numerous Track Templates, for smaller subsets of things - like a separate Track Template for each drum kit I set up for routing each kit piece to its own audio track, and the various buses involved, as well as the relative levels for each kit piece... I also set up and save Track Templates for things like standard drum kit mics, or common Kontakt instrument combinations. Saves LOADS of time. Bob Bone

Well, I am not sure what your settings are for the metronome, but I can tell you I just took a noodling project I had set up for capturing a few guitar ideas, and I changed the metronome choices under Project > Metronome, in Preferences, first to use 1 measure count-in, and set it for both Play and Record, and it worked just fine, during both playback and recording, with the emphasis on the 1st beat of each measure. I then altered it again, to use 2 measures of count-in, and again tested it for both playback and recording, and again it worked as anticipated, with a slight emphasis on the 1st beat of each measure. In the above tests, I did let it either play or record for the indicated count-in number of measures, and then 4 full measures of either playback or record, to be sure I ran the tests long enough to satisfy myself on my observations. Have you made other changes to the metronome section's parameters? If so, please detail them, and I will conduct my tests again to match whatever settings you are using. Bob Bone

You can select an audio track (click on the track number and make sure you have the Inspector Pane open - which you can do by hitting the letter 'I' on your computer keyboard), and that will show the selected audio track on the left side of the Inspector Pane, and the Master Bus will be shown on the right side of the Inspector Pane. Another way to do it is to click on the Master Bus, in the Bus Pane, which would be in the Track View and sometimes is hidden - there is a little double-arrow at the bottom center-right of the Track View, and clicking on that double-arrow toggles showing or hiding the Bus Pane. Once showing, you can click on the Master Bus there, and as long as the Inspector Pane is showing, you will see the Master Bus on the left side of the Inspector Pane, and the actual audio interface faders will be shown to the right of that. SO - either of the above would get you to where you can see the Master Bus, and if you click on the In/Out drop-down, it will show you available outputs to send the Master Bus output to. Normally, when I use my simple 2/in 2/out audio interface, I simply plug my headphones into its headphone jack and leave the main studio speakers off, or turn down the main output knob on the interface, so I never have to adjust a project to deal with headphones versus main outs. I do have more complex audio interfaces, one with 8 mic/line ins and a number of different outputs, and I can set up different routing assignments to those various output choices, and/or incorporating the main outs, as well. That interface also has an expansion unit that gives me an additional 8 mic/line ins, connected through an ADAT optical cable. Anyways - I hope I have helped you - if not, please take another stab at explaining what you are trying to do, and I will try to give you a better answer. Bob Bone

I agree that it can be useful. I think, though, it would still help to know if they really are identical - hence my suggesting the phase-inversion test. Vlada has indicated hearing a difference, whether imagined or real, so it seems prudent to know, one way or the other. Bob Bone

Convert to mono, as noted above, is what I would do, normally. Also, after backing up the original, wouldn't splitting into Left and Right mono tracks, and inverting phase on one of them, cancel each completely out, thus confirming they were identical? Bob Bone

I thought I was doing good just remembering about CAL - been quite a while since I have done anything with it. Glad you are sorted out. Bob Bone

Forgot to add - I generally use my midi controller's Transpose buttons, to go up or down an octave at a time, but the above will also raise or lower the midi note numbers for the midi track you are altering the Key+ parameter for. Also, you could likely transpose up or down an octave, within many/most synth plugins themselves. Bob Bone

If you open the Track Inspector ('I') you can change the midi notes up or down, for a selected midi track, as shown below (-12 would be down one octave, + 12 would be up an octave):

Please detail which precise plugins are loaded into any of these problematic projects. Are you using an audio interface? If so, what driver mode are you using? (ASIO?) What are the ASIO Buffer Size and Sample Rate as set while in one of these problematic projects? Thanks, Bob Bone

A quick way to get to Event Viewer, is to simply right-click on the Windows Start Button, and it is a few options down from the top of the list. You will want to look at any actual errors/critical reported right at the time Cakewalk fails, to see what info is presented. It shows different categories, and also sub-lists them within the last hour, week, etc., which helps you narrow down what to look at. Once you see one you want to look at, you can double-click on it to pull up that classification, and double-click on the first one of those in the list, to pull up some details - use the Back button in Event Viewer, to go back to the list..... That might help shed some light on what might be at fault for some of your crashes. Bob Bone

Kewl beans. You did not happen to mention the BIOS maintenance level, - unless that is contained within your 'etc..'. For any of your crashes, were there any Windows System Events recorded and visible in Windows Event Viewer, that correspond to the same time frame as Cakewalk failing? Bob Bone