IgoRr

12 hours ago, sunshine dreaming said:

Does this mean there is another 2023.09 update which then is the final legacy version? 

Or is production build 2023.09 (062) the final legacy version?

This latest version 2023.09.062 is the last final release of this DAW Cakewalk by Bandlab. After this version, two new projects will be developed: Cakewalk Next and Sonar, while they are in beta versions.

1 minute ago, Jonathan Sasor said:

That's correct, the Cakewalk Installer here will grab the full version of the latest installer if you're installing onto a new system. As with the update downloads, copies are placed in the Windows Downloads folder. 

Thank you so much, Jonathan!

8 minutes ago, Jonathan Sasor said:

The Cakewalk Installer on the site will grab whatever version of the installer is necessary for your system. If it's 2022.11 or later, it'll use the updater. If it's a clean system or an earlier update, it will use the full installer version. 

Thank you very much for the clarification!
How can I download the complete (standalone) installer so as not to depend on the previous release? I already asked this question in the “early access” topic, and someone from your team answered me that most likely the full installer will be published.
       Did I understand correctly that if I don’t have Cakewalk installed on my system at all, or if a version earlier than 2022.11 is installed, then when I run the “Installer” file, the latest release will be downloaded in full format? If so, where exactly will it be downloaded, and how to save it on my hard drive?

13 minutes ago, Keni said:

If I understood the comments here from the Bakers, if you download the link from the download cakewalk button on the bandlab website, you get the full installer, but I don’t know for certain if true or in effect yet?

When you click on the "Download" button on the Bandlab website, the so-called "Installer" is downloaded, when you launch it, you can select elements to install, but the installer itself (full) cannot be downloaded, it can only be installed through this program. But I can’t do this either - it says “You already have the latest available version 29.09.0.62 installed.” I have the Early Access version installed, and now I don’t know what to do to install the final release.

Many thanks to the development team for putting so much effort into the latest release!!!
        Friends, tell me: how can I update the version if I already have Early Access 29.09.0.062   installed? When you enter the "Help - Check for updates" section, a pop-up link at the bottom right says: "You already have the latest version 29.09.0.062 installed." Is there any way to download the installer itself for this latest release?

Thanks in advance for the information!

1 hour ago, Vyacheslav said:

Cake's projects are performing very poorly in Platinum. So yes - these are slightly different programs.

This is a completely natural phenomenon when, in older versions of even the same program, new projects are harder and slower, because the purpose of updates is to refine old versions, optimize the consumption of system resources, etc. The program, at its core, remains the same, it’s just now more powerful, more flexible and more “packed” with modern tools for music production, and it’s completely logical that in the old version of Sonar, all these new features cannot work as easily as in older versions.

30 minutes ago, Keni said:

the solo button in the Track View of the PRV only shows the MIDI track in solo until I allow the mouse to passover the audio track's solo button which then correctly displays the solo status.

I confirm - that everything is exactly the same for me, and this has been happening for at least 3-4 years, and maybe more, I just didn’t pay attention to it before. I think that this is a minor bug that simply no one pays much attention to and does not point it out to the developers.

1 hour ago, Misha said:

Restarted Cake, restarted computer.  Issue still present.

Greetings!
A couple of my good friends had sound cards from Roland and MOTU for some time, and sometime they had similar problems after some random overload of Cakewalk. For them, this was caused by the fact that the audio card driver dropped, which had to be reinstalled after such cases. I am not an expert in driver issues, but some audio card manufacturers still have similar bugs until this day. First, check whether you have any system sound at all (play some music or video, open YouTube, etc.), and if you find any problems, reinstall the audio card driver.
Personally, I was lucky, this never happened to any of the audio cards I used, but I remember such cases with my friends, maybe what I told you will help you.

I dare to voice a proposal: since this version will be the last for the current Cakewalk by Bandlab, it would be excellent to have a FULL offline installer in order not to depend on the availability of the latest release. I'm sure that publishing the full installer will not be difficult for the baker team, and all Cakewalk users would be grateful for this!
Thank you very much for your work, I am happy to work in the best and most convenient DAW for creating and editing music!

Dear Steve!

Thank you so much for your great tools to improve your Sonar/Cakewalk experience! I am currently using the latest version of CbB Tools_2.0.13 and would like to ask for a link to an updated resource with new versions. Version 2.0.10  is still posted on the official resource, I got lost and now I can’t even find the page from which I downloaded version 2.0.13   😉 

Bl would really appreciate a link to a page with updated downloads of new versions!

Sincerely, Igor!

28 minutes ago, sjoens said:

Wonder if we'll see something like this so we're not wondering why "Sonar" crashed while loading a project:

You can try to load this project in the following way: launch Cakewalk (Sonar), and from the "File" menu (or CTRL+O), select this project in the browser, first hold down the Shift key, and double-click on the project file to start loading the project. This is the so-called "safe mode", in which Cakewalk will show you the options to load/refuse each plugin/instrument that is in the project. In most cases, even if you load all the elements in this mode, the project can load normally. But if still not, then do not download the Melodyne plugin in your case, after the open project, you can add it manually.

6 minutes ago, Jesse Jost said:

However, the UI will be dramatically improved: clearer text, scalable views, support for high DPI resolutions and multi monitor configurations.

It would not be superfluous to have the option of scaling the text size in different places of the interface, I don’t know how difficult it is to implement, but I’m sure that 99.99% of users would be most grateful for this option!

11 minutes ago, Noel Borthwick said:

The advantage is color changes are now much simpler with vectors.

For me personally, it will be enough to be able to make the background in the piano roll light (not negative, as it is now), and so that the current theme "Tungsten" remains.

Personally, I will not switch to any other DAW under any temptations, and not because I am a stupid fanatic, but because I came to Cakewalk (still the old Cakewalk Aduio 4) consciously in the process of trying different DAWs. I liked the versions of the X line, especially the latest releases, I liked the Platinum version the most, and when the brand was closed, I was not too upset, because I had in my hands the best DAV at that time! And now I'm absolutely not worried, because I have the current version of Cakewalk by Bandlab.

So, any one commercial or technical changes (except for deterioration), will change my admiration and pleasure to work with Cakewalk products! Thanks to all the people who took and take part in their development and bringing to perfection!

1 hour ago, flangad said:

i also have one little question: i curently use a very beautifull skin for CbB. Is the new Cakewalk Sonar -and it's announced "UI enhancements"- compatible with CbB existing skins?

So far, there is not even a rough interface for the new Sonar anywhere, but I am almost completely sure that for editing/creating custom skins, a new Theme Editor will be offered, as it is now for Cakewalk, or the current version will work for the new Sonar.

On 4/28/2023 at 11:02 AM, Bayan Music said:

Since the update I can no longer open the project. It worked perfectly fine with the previous version.

Cakewalk is stuck at "loading synth data..." and eventually freezes. It's a Kontakt 5 instrument.

Try launching the Cakewalk, and from the already open program through the browser, run this project with the Shift key held down, this allows you to open projects in "safe mode". When loading a project, you can select the tools and plugins that you want or do not want to load, most often in this mode, even if you select ALL items to load, projects in most cases open normally.

51 minutes ago, Sal Sorice said:

Big thanks to IgoRr!

🤝   ✌️

11 minutes ago, Sal Sorice said:

Has anyone tried this?

I have been using this method for almost 5 years now, and not once has there been the slightest incident with any of the existing elements of the system or Cakewalk.

3 minutes ago, TBK said:

Somehow this involves girls too. Always does.

😁😁✌️  Congratulations! 

2 minutes ago, TBK said:

I disabled the one LP-64 and no change

And what settings do you use in the "Audio Export" window? Maybe you unintentionally changed something in the settings, and now because of this, the frequency characteristics of the exported file have changed? Try to attach a screenshot of these settings here, someone will definitely tell you the solution, I have everything left as before when exporting, but I never changed any settings in this window. If you attach a screenshot, I will compare it with my settings, maybe everything will be solved easier than it seems.

54 minutes ago, TBK said:

Did the rollback to 09 and nothing changes so it's some setting I've altered I suspect or some plugin is being stupid all of the sudden

By any logic, you need to look carefully at the plug-in settings on the Master Bus, because all other tracks or buses affect only something specific, and you, if I understand correctly, reduce the low-frequency component throughout the mix.

3 hours ago, Light Grenade said:

Since updating, some plugins are intermittently opening as a blank white screen. If I open one of the offending plugins when a mix is playing back, it can lock up the project and it instantly closes with no error message. 

I have carefully checked all the plugins you mentioned and everything works without any anomalies. I specially conducted an experiment - I added all these plug-ins to one track with the instrument (Spectrasonics Keyscape), and everything works properly. Each of the plugins opens properly, only Native Instruments Replica opens with a delay, but this was the case in the previous two versions, I am completely sure that these are features of the latest version of the plugin itself. I want to emphasize that I do not have a discrete video card, I work on the Intel HD 630 Graphics integrated into the processor.

I had a couple of times in all the time when, after installing the latest version on top of the previous one, some small anomalies appeared, but never such serious ones. Try to completely uninstall Cakewalk, clean out all folders and files, check the registry, and clean install this latest version, in 99.99% of cases, all problems are completely solved in this way.

For the future, you have one more option: go upstairs to "Utilities" - the last line is "Cakewalk Plug-in Manager". In the left window, select the line VST3. Scroll in the right window all the plugins to the letter "S", if there is no Shadow Hills, at the bottom left select the option "Show excluded(plugins)", it may turn out that for some reason Cakewalk sent it to this section. If it's there, click on it, and on the bottom left, the "Enable Plug-in" button. This happened to me a couple of times, although I have not found out the reason.

In principle, this new function is very convenient in itself, but if it could be "optimized" a little more: make it not in the form of a "point", but in the form of a link, in the same way as the "Add Plugin" function is designed to when hovering over this function, a list of plugins immediately opened, as in the "Add" section. This way it would be possible to "replace" the plugin in one click.

35 minutes ago, Jonathan Sasor said:

original post has been updated to version 008 which should resolve the delete issue

Yes, everything is working perfectly now, thank you very much!!!   🤝