Dean

Thanks for the replies! I am not sure what to call all the functions and am probably not saying the right name. In cakewalk on the right side of the track there are numbers that go from "54 to 6"or" -54 to -6". I'm thinking it's the latter. So on track 1 I have an audio file that when played peaks at "-12 to -6". When I record the second audio file from the Korg the peak is" -30 to -24" with the Korg set at maximum volume. If I right click on the numbers "-54 to -6" it is set at 60 db range if that means anything. So what I am trying to do is to get the second audio track to peak at "-12 to -6". Scook, it's going to take me awhile to digest your chart.

That's what I thought but when I adjust the "gain" knobs it does nothing to the meter setting. The only thing that changes the meter setting that I have found is the volume control on the Korg keyboard and it is maxed out.

I would like to adjust the meters in an audio track from my Korg keyboard. I can adjust it with the "master Volume" on the Korg, but it doesn't go high enough. In the track I went to "Options" then "meter options" and tried the settings there. No change in the meter. In the "record, playback and bus meter options" the settins are -60db. Am I even in the right place? Thanks

Some how I did it. Thanks again!

I have a file(song) with a .CWP type file I'm assuming. I would like to change it to a .WAV file so I can send it to someone. So I go to File-Export-Audio- Name of file-select WAV- select export and it goes to -Audio Library. Then I'm lost. Thanks

From Korg to focusrite to 3/4 line inputs. From stereo to focusrite 3/4 line outputs. In Cakewalk create an audio track. Where input source I need to select Focusrite USB ASIO (3in, 2 out). Then stereo or right or left focusrite USB ASIO input 3 depending on which I want. That records the sound from the Korg and plays it back. Thank you!

Thanks for the drawing! So the only cable I have is two RCA plugs to two 1/4" plugs. I plugged those into the back of the Focusrite into 3-4 of the line outputs. And I plugged the 1/4" 1L and 2R on the back of the Korg to 1 and 2 imputs on the front of the Focusrite. I was able to here the Korg sounds whether I used an audio track or MIDI. How exciting! If I get a 1/4" to RCA stereo cable, I'm assuming it comes with two RCA plugs and one 1/4" plug, does it matter where I plug that in 3 or 4? Greg, I spent a good hour trying to find "tape monitor" yesterday. And there it is just like you said. Thanks for the imput echo info also.

The display on the Korg. So on the Korg I put "Local Control" to "enabled" and through the headphones plugged into the Korg I here the proper sounds. That was exciting! When I plug the cables into 3/4 I don't get the sounds from the Korg the headphones or monitors. Does the "Cakewalk by BandLab Reference " site show the layout of BandLab? I am looking for a switch called "Tape Monitor switch". Again, Thank you!

Well John and Gregy, I can now do MIDI and Audio recording! Thank you both so much! I wrote down the procedures until they become second nature. Now I just have to figure out why my Korg EX doesn't play the sounds that are on the display. But right now I am Thrilled. How do I go to thread solved?

Thanks for the responses! I unchecked the MS GS Wavetable. I checked to make sure everything is up to date using the link. By "their ASIO driver" I'm assuming Focusrite's driver. In "preferences" in "MIDI imput" it says "2-Focusrite USB MIDI" and in "Outputs" it says "2-Focusrite USB MIDI". And "ASIO" is checked in "Audio / Playback and recording.". I don't get anything that says "Scarlett 4i4 USB". In "Preferences" in "MIDI". In "preferences" "MIDI" "Playback and Record" where it says "Driver Mode" it shows a gray box with" MME " but I can't change it. In "Preferences" "Audio" In "Playback Timing Master" it lists "1:Focusrite USB ASIO Output 1" and choice 2 " "2 :Focusrite USB ASIO Output 3". In "Record Timing Master" it lists "1 Focusrite USB ASIO Imput 1" "2:Focusrite USB ASIO Imput 3" and "3:Focusrite USB ASIO Loop 1". Whether any of this is relevant I don't know. I get no sound from the keyboard.

The 4i4 is here. I have a Korg Wavestation EX. I plugged in DIN cables from the EX "out" to "in" on the focusrite and "in" from the EX to "out on the focusrite. Then from the focusrite "line outs "3" to the "right" connection on the "tape 1" of the stereo receiver and line "4" from the "focusrite to the "left" connection on "tape 1". The green MIDI light blinks on the focusrite. If I go into BandLab in "preferences" then "MIDI" then "devices" in "input" I get "USB MIDI" with a check mark in the box. In "Outputs" I get "Microsoft GS Wavable Synth" with a check mark in the box and "Focusrite USB MIDI" Also with a check mark in the box. Am I wired correctly? Should I see something that says "WaveStation EX" there? The "WaveStation" has "Local control" disabled.

Thanks John. I have a 4i4 coming.

So the 2 or 3 more devices would be.....? A MIDI interface with the DIN plugs. Or a 4i4 Thanks!

Live and learn! If I sell a couple of my cedar chests I made I will get one. So could I get a MIDI interface for the two keyboards or is that another can of worms?

So I will check out the manual on the Focusrite 2i2 on the direct monitor button. The two cables worked. I am using Cakewalk as my DAW. I have a Rode mic that I will try next making sure to turn on the 48v button. Then I will explore how to hook up my Korg Wavestation EX. Thanks againg! You were most helpful.

So that cable I have plugged in now is only giving me either the right or left channel depending on which one I have it plugged into? I will for sure get two of those cables. If I want to record with a mic I can just plug it into 1 or 2 on the front correct with the two cables plugged into the back giving me a right or left mono channel correct? Is that your site "cactus-studios/home"? Thanks again!

Wow! Thanks John, I don't know if I understand your post totally. But I have a Pioneer stereo receiver SX 650. I have a cable from the AUX on the receiver to the green connector on the computer. Then I connected a 1/4 in TRS cable from the back of the Scarlett to the tape monitor 1 on the receiver and I have sound to my speakers! Yippee! I doesn't seem to matter which line output I plug the cable into. They both work. Also it doesn't seem to matter if I have the direct monitor button turned on the "o" or the "double oo". It seems to be better with the direct monitor button off. Granted, all I have tried to do was play a sample song from Cakewalk and import an audio file and play it. I haven't tried recording with a mic yet. Thank you very much!

Thanks John! Anybody want an old Focusrite Saffire 6 USB (joke) I got a Focusrite Scarlett 2i2 3rd generation. After installing it I downloaded a demo song and I was able to hear it through the headphones. I could also hear a C D through the headphones. I checked to make sure the settings were for speakers and it was. How do I get sound to my speakers?

I installed "Ableton Live 10 Lite". In the installation instructions it says "Now that you have selected ASIO from the driver type chooser you will be able to specify you audio interface in the Audio Device chooser. If you don't see your audio device listed here, it probably requires a driver install before it can be recognized". Since I got the latest driver can I assume (shouldn't do that) my Saffire 6USB is to old? In "Audio Device" "Driver type" It gives me a choice of "ASIO Focusrite USB ASIO Driver". but none of the following installations steps work.

Wow! Thanks for the reply. Yes I did download a driver from the website. But just to be sure I installed it again. So thank you for the list of features to check out. I kind of like the focusrite scarlett 2i2 gen 3. It would be wonderful if it was just an out dated audio interface.

The installation CD says "Saffire 6 USB" "version 2.0". It's at least 6 or 7 years old. So recommendations for a new audio interface?

I am trying out all your suggestions before I look like an idiot. But in the mean time I use windows 7 and have made sure that I have the latest driver for Focusrite. If my Focusrite won't work with windows 7 what would be a recommended audio interface?

Thanks for the response! I went into CakeWalk and loaded a sample file called "Sophia Jane" and on my screen upper right hand corner it said "44.1" and "16". I made sure in Cakewalk and Focusrite the settings were 44.1 and 16. I used ASIO and "Tape 1" on my receiver. I did not get the message "Unable to open playback device..." and when I pushed play the gray "pro Channel" the playback level goes up and down but no sound. I also tried disabling in "device manager" "High Definition Audio Device" and "NVIDIA High Definition Audio Device". This did not work. I also closed all my other programs and restarted BandLab. This did not work either. I would assume since I am getting playback on the pro channel but no sound that it is a setting some place. Should never assume. Can I use a Mackie 1202 VLZ instead of a Focusrite Saffire 6 USB? I'm thinking this shouldn't be this complicated.

Is there a place or site that can tell or show me how to connect my components to get things to work in BandLab?

I have a Focusrite Saffire 6 USB. The cable is plugged into the 1 and 2 line outputs on the Focusrite RCA jacks. This cable is then plugged into the Tape 1 receive of the pioneer stereo receiver SX 850. The USB cable from the Focusrite is plugged into a USB plug on the computer. In preferences I select ASIO and make sure Tape Monitor 1 switch is on. I load a demo song in BandLab. I click on the play button and get this message: "Unable to open audio playback device. Device may not support the current projects audio format or may be in use." If I select "MME (32 bit)" the demo song will play. If I try to record I can here and see the meters go up and down but it does not record. I was told to use ASIO but am at a loss. I did check to load the latest driver for Focusrite