JM2

Thank you.

Here is my current version.
no shift (when From BBT 1:1:0 to end, shift to 0?)
Drum dur 0 to 1

--------------------------------------------------------------
(do
    (int initial_time From)
    (forEachEvent
        (do
            (if (== Event.Kind NOTE)
                (= Note.Dur (/ (* Note.Dur 2) 3))
                ; 1200912 14:24:06 if Drum Dur 0 then set 1
                (if (== Note.Dur 0)
                    (do
                        (= Note.Dur 1)
                    )
                )
            )
            ; 1200912 19:58:06    Note以外もシフト
            (= Event.Time (/ (* Event.Time 2) 3))

            ; 1200913 00:38:33 test here and mute
            ;(= Event.Time (+ Event.Time (- initial_time From)))
        )
    )
) ;do
--------------------------------------------------------------

2/3 leng is not often 
I maint cal when I use it.
marker , beat change is manual.
 

I need to change 6/8 to 4/4(trip)

TimeBase 120
6/8 to 4/4
(12/8 to 4/4)

Tempo change is ok.

6/8 tick 60
to 
4/4 tick 40

I try 60 to 40
// process length start time and length 2/3

but length command can't set 2/3. 
only 67%
some track are ok with after Qtz.
some are not.

need CAL?

Its hard to explain in english.........ahh

MIDI track (external MIDI) but inst track(VST) is same.
with mouse operation, few ways clip etc.
but I need all keyboard operation for rapid edit with keymacro.

select area  From/To | delete | paste to other track same From/To

select area and select data condition(Alt-ctrl-F2)| delete | paste to other track same From/To

TB = 120

event Data are 
4:2:0 MIDI Note 
4:3:0 MIDI Note
means no data is in Start point

Set from 4:1:0
Set To   5:1:0
shift -10 select area
from 3:4:110
To   4:4:110
Now  3:4:110 (Goto and -10 to 3:4:110)
--------------------------------------
Select Track 11
Now is 3:4:110
from 3:4:110
To   4:4:110
--------------------------------------
Edit Delete
(Edit Copy)
--------------------------------------
move to 12 cursol down
Select Track 12
from 3:4:110
To   4:4:110
--------------------------------------
Edit Paste 
Edit Paste Special? (Ctrl-Alt-V)
event Data are 
4:2:0 MIDI Note 
4:3:0 MIDI Note

normal Paste
Paste Special
and select delete Alt-Ctl-F2
sometime missing FROM point as start of *DATA*. not selected area.
so I put dummy event to start and delete after paste.

old cakewalk(very old) was simple.
From and to select bar 3 to 4 (2 bars)
then it keeps always 2 bars leng, paste data 

how to use is sub mix?? flat style track.

Track 1 AP all org  //MIDI Ch 1 keep all data for refer etc .Mute after expand.
Track 2 AP      MIDI Ch 1 Only track para meter no data or 1st expanded data
Track 3 AP Hi  //MIDI Ch 1(same) and without track parameter Vol/pan
Track 4 AP Low //MIDI Ch 1(same) and without track parameter Vol/pan 
Track 5 AP part A1
Track 6 AP part A2
Track 7 AP part B1
Track 8 AP part B2
Track 9 AP 1x Riff
Track 10 AP 2x Riff uppper part
Track 11 AP 2x Riff lower part
Track 12 AP ending extra 
Track 13 AP ending extgra double copy //MIDI Ch 2
..

for pick up Part A of AABA 32bars x 3
select area move 32 bars then move. 

Keyboard Shortcut for Loop Start Time / Loop End Time?

Cakewalk - Cakewalk Documentation - Loop module
https://www.cakewalk.com/Documentation?product=Cakewalk&language=4&help=ControlBar.08.html
> Loop Start Time.?The current Loop Start time. Click to modify.
> Loop End Time.?The current Loop End time. Click to modify.

in S-key
it can only set, set start/End of data, goto from / to
not goto edit box.

I have setup all
F9 現在タイムを始点に設定
F10 現在タイムを終点に設定
Ctrl+F9        プロジェクトの始めを始点に設定
Ctrl+F10    プロジェクトの始めを終点に設定
Alt+F9  始点タイムにジャンプ
Alt+F10  終点タイムにジャンプ

now loop point is same as Selected area From/To time.
Reason is I use cakewalk longtime and now need very 
rapid edit again for current project.
so I rebuild all macro and CAL now.

From/To Edit was key to From and To edit. (old Win Cakewalk/DOS)

AHK(external macro) can do mouse move but sometimes delay.

now after reach to edit,
key [ ] + - works.

TB 120 -> I use most time +- 5 and 10
shift -5 tick before
- Edit Start Time
- key - (tick -1) (x 5)
- Edit End Time
- key + (tick +1) (x 5)

1 bar move
- key [ (move -1 bar)

after this, I do move to other track
for copy paste for move,  I will ask next post.

On 8/6/2020 at 9:03 PM, Promidi said:

Or you can set the metronome to Audio rather than A MIDI midi note

Thanks, 
metronome to Audio works. better than dummy audio track

On 8/6/2020 at 9:26 PM, Nigel Mackay said:

What realtime functions? If you don't say we can't help.

Track tick offset
Track tick transpose

this func are  not realtime now at inspetcor view
it was realtime old cakewalk at track view
ie. while playing we can change offset /transpose
so I setup external macro key to simulate.
(AutoHotKey type external tool)

Track tick transpose -> Drum sound to change SD1 to SD2

so midi fucntions and some are ok at audio 
but audio is heavy.
 

build 2020.08.0.120

at Arranger view title 

> ::CMixerInspectorSiteView:CMixerViewInspectorFrame::Arranger::View::Inspector::InspectorBorderComponent<Arranger::View::Inspector::ArrangerInspectorComponent>

English text

Selections
Arrangements

Japanese 
[][][][][]
[][][][][]

> Mojibake (garbage text) occurs when using Unicode multibyte characters (Japanese, Chinese, etc.) 
> on OS that differs from the selected CbB language.

not sure this Mojibake means TEXT to [][][][] and where you fixed.
with prev Version: 2020.08 (Build 20?) 
all are ok at simple plain Win10.

and some setup OS(with external font control tool, DPI change etc) 
Win10 and Win7, its not fixed.

now build 2020.08.0.120 fixed and 
found only 2 text are Mojibake

Selections
Arrangements

to 
Mojibake [][][][]
 

On 8/4/2020 at 9:18 PM, Nigel Mackay said:

The problem is actually not arranger. Loop means loop - start at point A, play until point B, go back to A, play until B, go back to A,.....

To get the patterns you want you will have to edit your A1   A2   A3   ... to be A1  A1  A1  B1  C1  C2. Copy, insert, etc.

Or, experiment with Matrix. Views -> Matrix View. This is designed to play loops, repeats, variations, live session by clicking on a block when you want the pattern to change.

Couple of tutorials (from search YouTube for "cakewalk matrix".

Here and here. Or maybe this or this.

Thanks
I use matrix view for drum machine like. ie. FL Studo, LMMS like..
I re-start to test matrix view/normal data now.(not loop based only data)
 

On 8/4/2020 at 9:23 PM, Nigel Mackay said:

If you convert your midi clips to audio clips then the pre-roll doesn't matter any more.

This should help you get started.

Thanks. 
huum, yes audio track has no pre-data. good.
midi to audio lost many realtime fucntion.
so for me big cons now.

On 8/5/2020 at 4:01 PM, Promidi said:

The audio engine needs to be running for the arranger to play your re-orded sections.

I use arranger function at midi only track project.
Cakewalk's Internal clock means SEQ engine (old but best of best golden best...SEQ engine).
anyway, I use workaround add dummy audio to run re-order.
 

Cakewalk Loop means L to loop.
BBT 7:1:0  10:1:0 loop 4 bars loop.

I use cakewalk for net live session and loop.
(session -> realtime session and delayd sync session)

and live session's loop is BPM 120.
cakewalk set to BPM 120.

sometimes few diff. 2ms 3ms? or more 

I check it 
and cakewalk L Loop is not clock based.

it's 
playback [From] - [TO}
do job for restart [From]
play start [From]

when 
> BBT 7:1:0  10:1:0 loop 4 bars loop.

Cakewalk at 10 0 0
then cakewalk do all jobs ie. 
need prec midi control at bar 7 1 0 
(like when start bat 7 1 0 )
then start from 7 1 0

not big problem, while live session 
around 10 min or so loop is few diff, not out of sync. 
BPM is same ok.
start point is diff.
but some project file (only MIDI but) has meny pre control data
and I have setup always 
setup | project | MIDI | pre-send MIDI On(not sure english menu text now)

so How to setup loop sync like MTC sync.
I test clock to audio  (that I do't like for lost functions but)
its same like internal.
 

Cakewalk Loop means L to loop.
BBT 7:1:0  10:1:0 loop 4 bars loop.

I use cakewalk for net live session and loop.
(session -> realtime session and delayd sync session)

loop means auto-play. ie. cakewalk's play back.
and loop means rereat 4 bars, 8 bars, 16bras, its cakewalk's loop.

not simple BBT From -- BBT to loop.

what I need is 

Arranger Track
A1
A2
A3
A4
B1
B2
C1
C2

Arranger Track
********* it shows wrong font [][][][].....
so I can't say is.

Arranger Track play
A1
B1
C1

and loop
[A1 B1 C1 C2] Loop

and only Arranger Track setu,
I like to setup 
loop
A1 A1 
A1 B1
C1 C2

and switch while live sesstion.

workaround?
 

Not sure started 2007.EA or from 2020.04 Early Access

Cakewalk setup project Clock Audio or internal.

MIDI(not VST track) only project is Clock:internal
I use this MIDI only setup many.

Arranger Track can't work.
A1 A2 A3 A4
start A1 and A2 no sound.

work around is add dummy audio track to set clock:audio
if one or more audio tracks(audio/inst track(VST) then cakewalk set to clock:audio.
and setup | project | clock

is this Design? or bug?
ie. Arranger Track only works clock is Audio(not internal) or bug?

MIDI only and clock internal has many pros for me

* very slid clock for MIDI
* many good functions 
such as change perc tempo, (name?)
now in Japanese menu so not english name.

default 
1) 0.5
2) 1.0 default
3) 2.0
with short cut key 

with this, tempo changes %. no change tempo map.
and other great cakewalk internal functions.

Japanese lang Arranger Track Menu shows [][][][][]

POC 
set lang to Japanese.
Show Arranger Track
Consol::Arranger::View::Inspector::InspectorBorderComponent<Arranger::View::Inspector::ArrangerInspectorComponent
some menu show [][][][]
Input Japanese to Arranger Track name. it shows [][][][][][]
Section type text [][][][][]

Reproducibility : 100% (all project file)
workaound : none
When started : Arranger Track Cakewalk 2020.04 Early Access

bleeding? you see some input? low level and when play no sound? 
if so its just noise or driver issue. not cakewalk.
Roland driver is out of maint.
TD-27 Driver Ver1.0.0 for Windows 10 is only zip html readme file.
maybe 1.0.0 is very old driver. 
The don't put it to web, download zip and see readme.html and 
it says driver is on demand when you put it to PC.

any diff combi you try?
out to analog and to cakewalk to diff I/F
(I know this can't check all but even you can check cakewalk's multi input part)
other DAW like reaper same things.

200721 15:50:51
//TSF->TF5
Frined setup is 
Platinum TF5 + aic128d (YAMAHA Audio I/F to TF5)

---------------------------------------------------------------------

Im Japanese.

I like to know
Pros Cons Cakewalk with one big multi A/D D/A  or 
small x multi such as Zoom 8x8 (x) 4 to 32ch

also like to know Pros Cons Cakewalk vs Cubase

I use Cakewalk longtime. most time, All MIDI based.
My friend use SONAR Platinum and some issue with MIDI I/F Windows10.
slow delay MIDI In.
I will setup Cakewalk by BandLab. and check all setup/env.
also my friend changed Multi D/A I/F(ieee type multi A/D D/A 48ch etc.) to YAMAHA TS5.
Yamaha TF5 48-channel Digital Mixer (or 32ch)
also now he try to it with cubase.

I think Cakewalk is 10times better than cubase. 
dongle protect ..only 1 or 2 env run. 
DAW/MIDI function is poor than Cakewalk specially for my friend. 
He use DAW as HD multi track Recorder. recoreding many tracks from analog. 
and MIDI SEQ (VST). 

EA2 Version: 2020.04 (Build 164,64bit)
Lang Japanese: no 3 menus 
Create Secion from Selection|Markers|Sections
I can't do this 3 functions.
 

jpg
same setup/project file 
English lang
Japanese lang  no menu 3 lines

I cant edit inside framte URL with start time video to link
so I put it here with URLhttps://www.twitch.tv/videos/597515233?t=00h08m53s

this play event list note to next note -- with same key 
 

1 hour ago, Jonathan Sasor said:

2020.04 builds have Ctrl + Alt + Space bound to Preview Play Arrangement From Now Time as a Global Binding. This is overriding your existing binding which is view-specific to the Event List. If you unbind the global one the Preferences, it should return to the 2020.01 behavior. 

Thanks info.

EA2 Version: 2020.04 (Build 164,64bit)
in EA1 EA2 
I can't do setup for my old 2020.01 behavior. 

what I did unbind  is 
locate Ctrl + Alt + Space
push unbind

so I can't unbind "Preview Play Arrangement From Now Time" 
this seems inside setup. no bind to right side function.
so unbind botton makes nothing.

I have REC video at yourtube, URL later.
//youtube live to archive is very slow today

"Ctrl + Alt + Space for Event view play one note" is not my setup. 
I just change Ctrl + Space to outside of cakewalk.
2020.01 has it in inside setup.
inside setup means such as SPACE for play/Stop

is there function name for Event list-play one note?
if so I can setup some key to that function.
play one note means 
if 10 events at event list
repeart Ctrl + Alt + Space to 1 2 3 4 5 ..

Event view key Ctrl+Alt+Space

2020.01 event list. Ctrl+Alt+Space to play one next note. 

EA1 Ctrl+Alt+Space doesn't work. 

then 2020.01 Rollback installer. now 2020.01 and it works.
I will test EA2 at other PC for easy to check 2020.01 and EAn.

why you changed s-key and no notice? or just a bug?
there is no info at EA1 EA2.

in EA1 
perf /shortcut key /area evetlist view / not same as 2020.01

my edit work speed get very slow.
if keys confrict, (key for Arranger, 
please keep all function with other keys.

any combo key in windows system I can setup.

Here is my set up with external macro system.
// key C-P        = Enter NumPlusSign    Enter C-A-Space Up Down        # Enter + Enter 音だし Up Down
// key C-O        = Enter NumHyphenMinus Enter C-A-Space Up Down        # Enter - Enter 音だし Up Down

Ctrol-P to play + note and sound play
Ctrol-O to play - note and sound play

and Ctrol-Sapce to Ctrl+Alt+Space with external keymacro
// # 1180914 21:38:18    Cakewalk Ctrl+Alt+Space CW Event Listで 音をならす これを Ctrl+Spaceに
//#    左が押す元のキー
//# key C-Space = C-A- Space         # Ctrl+Space -> Ctrl+Alt+Space
//#    1180914 21:46:14    逆も一応いれる。
//p# key C-A-Space = C-Space         # Ctrl+Alt+Space -> Ctrl+Space