gustabo

6 hours ago, Alastair Cardwell said:

Hello all

I am having a minor issue with the chase mode in articulation maps. While it is easy to work around I am not sure it is something I am doing wrong or a problem with Cakewalk so wondering if  anyone else has come across this?

I have the chase mode for the articulations set to full. If I start playback from this position it behaves as expected and the articulation changes to Rolls.

 

If I start playback from this position the articulation changes to Rolls whereas I was expecting it to change to Hits as this previous articulation in the map.

 

Is it a latching keyswitch?

4 minutes ago, charles kasler said:

I know things like automation Lanes can cause the project to continue past the end but in this case in a couple of my projects it does stop correctly at the end but the exported file has more dead space at the end. What would cause this? Is there some way to catch it without having to export and test each file? Thanks for any suggestions!

Set a "from", set a "thru to" and export that range.

Did you select it in prefs?

M

Quote

Merry Christmas to all!

2 hours ago, hsmusic said:

I've had this problem with InfiniStrip's VST3 crashing CbB since it was released a few years ago, both mono & stereo. This morning I opened CbB after not using it for a few months updated to the latest versions of each. After inserting 2 instances of the strip it crashed CbB hard.

Whatever is causing it the issue it still remains a problem.

Did you send the folks at Cakewalk a dump file?

On 12/3/2023 at 1:19 PM, gustabo said:

And if you bought them in November, your free updates end at the end of December. Free updates for the calendar year of your purchase.

Correction, your free updates actually ended in November, just found out that there is no December update.

17 hours ago, Oluwatomisin Akinwande said:

It seems the setup for cakewalk is very connection sensitive. The moment it faces the slightest network trouble, it shows an error message and then it has to start right from the beginning again. It's been making me waste my data subscription. Anything I can do?

My daw is completely offline and I have no issues, your presumption is wrong.

17 hours ago, John Vere said:

Nope never is. 

Do a video

Did you not fix it utilizing workspaces? That's the resolution...

5 minutes ago, Keni said:

Not that I'm aware of. Remind me please... What does the pause key do?

What you are describing 

And if you bought them in November, your free updates end at the end of December. Free updates for the calendar year of your purchase.

If you're that tight for space, maybe a larger drive is necessary?

24 minutes ago, Milton Sica said:

There are constant reports of slowness from users of the latest version. There is this specific topic and also in the feedback post, but these comments seem to be relegated to the third or fourth level, if not at all, with the search for a justification always being sought.

One time it's Kontakt, another time a plugin, another time configuring the user's station and so on.

And I'll reinforce: yes, the program is slower to load projects.

Can't reproduce "slower to load projects", it is the same here, both audio centric and midi-centric projects.

57 minutes ago, Keni said:

OK... This is really crazy...

I just opened the same song to work.

I unfroze the guitar track and ctl-drag copied the clip  (8bar) on it.

Then went to re-freeze and once again CbB is crashing from Amplitube 5.

I'm gonna go back re-launch CbB,

Open the same song file,

replace Amp5 with Amp 4

and begin the replacement process I posted in my previous message about this issue (above) I know I'll get it to freeze again after enough changes between plugins as I did before. .. or at least I believe I will. This is frustrating. I avoided both Amp4 and Amp5 continuing to use Amp3 being so much more resource efficient and still decent sounding.  Then I moved up to my new DAW with win10 (I was on win9.1 on my previous DAW), I discovered I can't get Amp3 authorized here. Another calamity of the changeover to Microsoft control of signing ID and all it's issues.

 

So I switched to Amp4 and all is well except that I lose a few amp models that for whatever reason(s)  didn't make the transition over from Amp3 so I began to think, I might as well move up to Amp5 where I have more available than Amp4.... which brought me here today.

I do like the sound I'm getting from Amp5 better than the closest I've come to same setup in Amp4 but at least it freezes ok.

 

Is anyone else experiencing freeze issues with Amplitube 5?

 

Keni

 

Oh yeah, things are stranger yet...

I did my best to repro the successful procedure I used earlier and it disn't work, so I though about it and remembered an error that happened while doing the successful event.

That was accidentally, I loaded both Amp4 & Amp5 into the fx bin before realizing it and then deleted Amp4 to fianlly get a successful  freeze of Amp5....

 

And that now worked twice as a work around here it is boiled down

 

Work my part enjoying Amp5, then (this will require a bit more experimentation to see what I can .successfully trim out of it) Place Amp4 into the FX rack with it and then see if removing Amp4 then allows Amp5 to freeze. If not, the longer and now twice successful method was to replace Amp5 with Amp4, Freeze, unfreeze, replace Amp4 with Amp5 and finally get Amp5 frozen! <sheesh!>

 

Am I the only hangout using Amplitube 5? ...or at least trying to?

 

 

Try rescanning your plugins through prefs (vst scan) before freezing and see if that makes a difference.

Is there a chance you updated the plugin after it was first frozen?

9 hours ago, Michal Mikulski said:

Hello,

SoundID plugin is making a project opening for ages. I have custom EQ preset selected in SoundID, and when I save the project with Sound ID, I have to wait nearly 10 minutes when I try to open the saved project. Normally it's a matter of seconds if there's no SoundID pre saved in the project. I developed this problem sometime ago after updating cakewalk, two or three updates ago, and it still persists. The SoundID app is updated to the newest version, but it made no difference. So is my Cakewalk app, and it's the last update apparently before it's a paid product... this is a serious problem to have if you are planning on releasing this as a paid product as many people are using Sonarworks! I also read the whole section, and I'm not the only one with projects opening a long time.

Regards, 

Michal M.

Not seeing that at all. Is your SoundID updated?

Great midi fx, one of a handful of people that make mfx for sonar/cakewalk!

https://midi-plugins.de/#Home

16 minutes ago, Bill Phillips said:

I'm wondering what you mean by high quality. Waves tech support told me I could use any USB drive and that even the smallest one would have much more capacity than I need for my < 30 plugins. So I plan to use one of the SanDisk 8GB drives I use for clean installing Windows.

High quality would mean reputable known brand as opposed to crap found on Aliexpress or Temu

Tremelo

3 hours ago, lapasoa said:

I'm doing and I did every day.

You said "And the output track you must set also to reverb bus", that is incorrect, it doesn't have to be set to the reverb bus.
Just because you do it that way doesn't mean that's how it has to be done...

1 hour ago, lapasoa said:

Let's be clear. On the track you set send to reverb bus. And the output track you must set also to reverb bus.

No you don't

1 hour ago, greg54 said:

And when the button is on, there is no reverb on the track.

The button switches between pre and post fader, the fader doesn’t affect the send if it is pre-fader, the fader does affect it if it is post-fader.

44 minutes ago, Milton Sica said:

Sorry, I was wrong about the side of the button.
The left mouse button.
I tried again and found that the cut was made, but in a completely different position from where the cursor/position was.

I commanded the cut at the cursor position.
See where the cut was made.

Was the cursor at the position marked in the timeline? No? Try going to the point you want to cut in the timeline and then try cutting, that's how it works...

Install on both, some plugins have file dependencies