msmcleod

Set up a temporary new arranger track with a 1 or 2 bar section at the end of verse 1, then create a new arrangement with the new section leading into chrs 3. You can have as many arrangements as you want, and it's easy enough to switch between them. You can then either delete the new arranger track afterwards, or hide it if you need to go back to it.

Maybe I'm misunderstanding your issue here, but if the MIDI Channel is set to "Follow", you can just right click on the articulation section and set it's MIDI Channel.

Are some of your audio clips set to musical time, when they should be absolute (or the other way around) ?

If they're not selected they won't be moved. Make sure you've got the correct selection options you require checked in the Track View options menu:

Are these 32 bit DLL's or the 64 bit versions?

You've probably got MIDI output enabled on your synths. You can change the default by going to the insert synth options page and uncheck "Enable MIDI Output". For existing synths, go to the VST menu at the top of the synth properties page, and disable MIDI output. However, if you really do need MIDI output on a synth, you'll need to use a specific MIDI input on your other tracks, rather than Omni, None, or All Inputs, e.g.:

IIRC, you had to "claim" your free version of CA-2A at the time. Once you did, it appeared in the Cakewalk Command Center as a licensed product. Any time I've had to re-install mine, I've done it via the CCC.

It depends on the software. There's three things iLok enabled software can offer: 1. License to iLok dongle 2. License to PC 3. License to iLok Cloud Session All iLok plugins do 1., some allow 2 and/or 3. The other thing about iLok plugins is the number of activations they offer. I'd prefer 3 activations per plugin... most offer 2, but some only offer 1 activation. I've got an iLok in the studio, one in my office, and a laptop with no iLok. I want to be able to buy the software ONCE then activate it to my 2 iLoks and also my laptop. Software that only offers 1 activation requires me to buy several copies of the same plugin. So if you've more than one machine, keep this in mind. I was pretty much anti-iLok before I got one. Now I wish everything was on there. If you've ever had to do a system rebuild, going through installing 500 plugins and authorising them is a prize PITA if you have to enter license codes for each one. With iLok you just plug it in. One thing to note tho - if you DO rebuild your system, make sure you deactivate your licenses first... else you'll lose them and end up having to scrounge them back from each plugin developer afterwards.

One of the things that has been bugging me about Chord Track discussions, is the existing chord events that have been there for decades in Cakewalk/SONAR (used in the staff / fred board view), Meter/Keys, and the Marker pitch (with respect to Groove clips). So if you take an existing audio (or MIDI) clip and make it a groove clip, you can already use Pitch markers to transpose the clips in real-time at various points in the time-line. For a lot of people, this might be all they want from chord track (but obviously looking more like arranger sections rather than markers!) Obviously this is very simplistic compared to a full-blown chord track, but what I am interested in is everybody's expectations as to how integrated a new chord track should be with the existing features. Do you think they should be completely separate to the chord track, or should they be aware of each other somehow?

That I don't know yet I'm afraid.

Articulations are treated in the same way as any other MIDI event - unlike Tempo's, Arranger sections, Markers etc, which are separate entities altogether. So the trick is not to have the articulations selected in the first place. There are a couple of options to prevent articulations getting selected: 1. In the Clips View: 2. In the PRV: Unchecking these should stop articulations getting selected. Note - there's a known issue with lasso select in the clips view always selecting articulations. This has been fixed and will be available in the next update.

If you're using plugins that have a huge amount of parameters (e.g. TH3 or Scheps Omni Channel), this can cause this. We're aware of the issue, and are looking at solutions.

Just out of interest... does your real CZ get any use since getting Virtual CZ? My CZ-1 and CZ-3000 are in the attic gathering dust...well, their cases are!

The only time I've seen this behaviour is when using a Realtek audio device, and using Realtek's ASIO driver. There seems to be issues with the Realtek ASIO driver - switching to WASAPI solved it for me.

The synth rack opens according to the options on the Insert Soft Synth Options dialog: Please send the generated minidump file to @Jonathan Sasor so we can look into this further.

The whole point of groups is to combine mutually exclusive articulations (i.e. articulations that can't be played at the same time) on a single lane. Examples of this would be: - Strings - pizzicato, spiccato, legato - Guitar - palm muted, not palm muted If the articulations are not mutually exclusive (i.e. you can play them at the same time, e.g. palm mute and slide), they should go in separate groups. You'll need to check with each VSTi as to which are mutually exclusive are not. If pressing one keyswitch cancels out another, then those keyswitches should be in the same group. If pressing a keyswitch leaves the other keyswitch active, then they should go into separate groups. For the most part, the VSTi's are modelled on what you can do in real life with that instrument. In other words, articulations that are based on what your right hand is doing (palm mute, pizzicato etc) will normally be separate from what your left hand is doing (sliding, vibrato etc). So right hand articulations should be in one group, and left hand articulations in another.... this isn't always the case though, so check what your VSTi supports. New lanes are automatically added for each articulation map/articulation group combination. So if the map is different, it'll be on another lane; if the group is different it'll be on another lane... if the map and the group are the same, it'll be on the same lane.

...ah but you're assuming I've not got a 2nd beer in my other hand...

SI Bass's octave is different from GM synths like TTS-1... it also only responds to a limited range of notes. Try transposing it up an octave.

From what I can tell... if your steering wheel is on the right-hand side of your car it's "kap-oh"... if its on the left side, it's "kay-p-oh"

@Mark Morgon-Shaw - can you PM @Jonathan Sasor with the cwp file? I've tried exporting some of my projects using an arranger section to select the region, and it's all working fine for me. There must be something else causing this.

You can't do this with articulations. The easiest way to do this is using Automation. Alternatively, you can use the CC editor on the PRV to draw in the CC values.

If the drivers were messed with by the Windows 10 update, then the latency settings could be invalid. You could try resetting your audio config: Failing that, exit Cakewalk, rename AUD.INI to AUD.INI.bak within %APPDATA%\Cakewalk\Cakewalk Core\ , and restart Cakewalk.

I've just given the 2020.11 release a quick run through on Windows 7 - seems to be working fine for me. It was a very quick test though... just loaded up a project with some articulations and checked it played ok, and the articulation dialogs were working properly.

Unless you've used the "Configure Layout" button, you should be able to just swap the MIDI ports around in Preferences->Control Surfaces. Otherwise, just delete the two Mackie Control entries in Preferences->Control Surfaces and add them again starting with the nanoKONTROL.

This is something we looked into but didn't make this release... we couldn't have gone on adding features forever without releasing anything. We'll definitely look into it for the future though.