Jump to content

Lee D

Members
  • Posts

    176
  • Joined

  • Last visited

Everything posted by Lee D

  1. Thanks for the feedback everyone. I'm running Windows 10. My buffer size is at 96 samples. I will try bumping it up to 128 samples and see if that fixes the issue. I didn't even think about the ASIO buffer size being the culprit because there's no crackling during playback. Robert Bone I hear what you're saying but I am frequently jumping back and forth between MIDI editing with VST synths and mixing, so I'd really like to get a buffer setting that will work for 95% of the time. Will report back after some research!
  2. WTF are they smoking? Is this an early April Fool's or something?
  3. I like In The Mix and Busy Works Beats as well, great FL tutorials!
  4. This is probably unlikely, but is the "insert" key on your keyboard busted? The "insert" key is a shortcut for adding a new track.
  5. Lee D

    All the Love I Need

    Great track man! Nice and catchy, feel good for the summer tune for cruising with the windows down!
  6. Yeah patterns is the difficult part for me. Which is basically the entire workflow. It's awesome for quickly getting ideas down but then when you get into copying patterns, make unique, etc it gets a little bit tricky. And remembering what instrument in the rack is attached to what pattern, etc. I love the interface though, and piano roll is awesome like you said.
  7. After you adjusted do you like the workflow now?
  8. Is that a custom plugin layout? Or just the default one? If you customized it maybe you need to update your custom layout.
  9. Hmm that's weird. . . you may want to troubleshoot that to see if you can get it to work. Kick the computer a few times. . . that always helps.
  10. Yeah that sucks. Maybe easiest is to run the line-level inputs to your Focusrite and use guitar amp plugins instead of running through the Katana 100.
  11. That's typical with the Windows low-latency audio drivers. They provide basically direct access to the hardware. The drivers that allow multiple devices to work typically have higher latencies unfortunately. I used to struggle with that when I had the Focusrite USB and also a Yamaha keyboard that had a USB-audio interface. . . couldn't use both. Unfortunately your best bet as far as I'm aware is probably to use the Focusrite ASIO and just run the amp into the Focusrite. I heard that Macs natively allow you to use multiple audio devices with low-latency. . . nice feature.
  12. Is it awesome? Worth $100? I struggle with the FL Studio workflow in general.
  13. I have to second this. . . I took a long break from Cakewalk (my last version was Sonar Platinum but I always found it had too many bugs / glitches to really use) but I started using it again with the July update and I'm REALLY impressed with it. It still has its flaws of course but overall I would say it's really come into being just as good as the other major players, and I actually prefer the workflow and strongly prefer the UI over many other DAWs at this point.
  14. Kind of vague info to work with but here's some thoughts. When you open up task manager next time it freezes, make note of the CPU and memory usage of Cakewalk. That would be interesting to see if it is taking a huge amount of memory up. Is there a VST plugin that you always use in your projects that could be the culprit? Have you had this issue with other DAWs? Is your PC in "High Performance" power mode? If it's in a lower power mode maybe it's suspending the USB peripherals or something related to power-saving features could be causing issues. All your drivers for your hardware up to date?
  15. I haven't tried ASIO4ALL, but I know that they made improvements a few years ago to Windows WASAPI driver. Have you tried using WASAPI instead?
  16. I have a Focusrite 18i8 first generation that I'm using with ASIO drivers. It works fine 90% of the time but I've noticed that when I do a lot of playing and stopping quickly (which I do frequently because I'm editing small sections of MIDI), it will occassionally either: 1) Play no audio when I hit play (the transport moves but no audio). If I stop and start again then the audio comes back. or 2) Continuously play a static / humming sound through the speakers when the playhead is stopped. This goes away if I hit "play" again or if I reset the audio interface using the button in the control bar. Anyone have similar behavior? It's not a huge deal but it gets a little bit annoying over a long session when one out of every 5-10 "plays" has a problem.
  17. Last night I spent an undue amount of time extending the MIDI clip lengths because they either didn't start exactly on the measure, or they didn't finish exactly on the measure. The problem is that if I don't make these adjustments, then copying/pasting or groove clip looping doesn't work like I want it to. For example, when I drag in a 2-bar drum loop from Addictive Drums, Cakwalk will consider it to be slightly less than 2 bars, possibly because it doesn't have a MIDI note right at the very end. But this also happens with MIDI playing. Or even while making edits, it seems like Cakewalk is overly eager to make my MIDI clip lengths less than I want them! Other DAWs don't seem to have this behavior. . . they round off to the nearest bar with the MIDI clip. Does anyone else deal with this issue? Is this something to do with my settings? Or is this is a Cakewalk-unique workflow that I need to understand better?
  18. Thanks again. I tried the ProTools mapping as well with the HUI. The loop button was correctly mapped but some of the other buttons didn't work as well, so overall I think the Standard MCU is the better fit. Really appreciate your help and also your efforts on making that software!
  19. Phenomenal! Love the little video images because usually it's a little hard to understand the changed just by reading. Really great update, hats off to the bakers!
  20. Is there a way to easily create a automation lane with a parameter assigned? I know there's a dropdown list for that instrument when you create an automation lane but I was wondering if there's an easier way if I'm tweaking a knob in the VST and want to automate it.
  21. I have an Arturia Keylab MK2 MIDI controller. When I load up Analog Lab 4, it automatically maps the knobs and sliders to various controls in Analog Lab 4. When I record MIDI and move the knobs, I see the CC changes overlay on the MIDI note recording and when I open the piano roll I can see the control changes as separate lanes. Is there a way to show that data as separate automation lanes in the track view instead of showing it in the piano roll view?
  22. Honestly DAWs can be finicky sometimes. One person may have a lot of issues with a certain DAW while others don't because of their system configuration. Better to just find a DAW that doesn't crash for you!
  23. Fantastic! Works great now. The transport buttons all work except for the "loop" button, the track select buttons, faders, and knobs all work as well. Some of the buttons are mapped a little bit incorrectly for the controls. . i.e. the loop button doesn't seem to do anything but the "metronome" button enables loop mode, etc. I can't edit the messages the Arturia is sending in this mode, is there a way to edit the configuration on the receiving end to interpret it as a different command? Thanks so much for the help, that makes a huge difference.
  24. Ah OK I didn't notice the "Disable Handshake" there. . . I will try it later, thank you!
×
×
  • Create New...