-
Posts
38 -
Joined
-
Last visited
Posts posted by Alcar28
-
-
Depends on what sounds you use. Which libraries do you have ?
I made a concert band template but quite personnal, using a mix between EWQLSO Gold samples and Garritan COMB for saxes ans euphoniums.
-
Hi,
I was working on a project for concert band, with some samples from EWQLSO Gold, with "Play" and suddenly CbB crashed, asking me if I wanted to save my work.
Here is attached the error message.
Now, Cakewalk refuses to close.
Thanks for your help.
I have Win 10, Intel Core i7, 16 Go RAM, SSD 256 for system and HDD 1 To for sounds, and HDD 1 To for projects.
-
That's me ! I posted on Facebook.
The notifications advice didn't work, same problems ...
I still have the blue circle turning and turning, like if it was in a kind of loop.
I still try to use the onboard device of my brand new laptop, which is runing Under Win 10.
I'll try to install my Roland Octa-Capture and see if it solves the problem.
I'd like to buy a small sound card for my laptop, but I'd like to wait and see if Cakewalk works ! Else, I might return this laptop in the next days.
Thanks
-
Need your help, I just bought a new laptop to record when I’m away from my home studio, asus i7 16Go, HD 1 To, ssd 512 Go.
I installed Cakewalk by BandLab like on my studio computer.
When I load a demo song, I have the small blue circle which don’t allow me to play the song. Just like I have to wait but It seems to last forever.
All I can do is close Cakewalk.
Any idea of the problem ?
I wonder if The problem comes from the laptop, do I have to send it back ?
Thanks -
Thanks Noel,
I understand what you mean, but for Windows, I don't use Roland OctaCapture at all. In the control panel, the default device is set to the onboard one.
From the beginning, I never changed the sample rate. Always 44,1, either in Octacapture driver settings or in Cakewalk.
The bit depth is set to 24 (it was 16 in Windows, but I changed it to match with Cakewalk.
I'll check "suspend audio engine ..." to see if it works, but I think I already tried that by the past.
My goal is to use Roland Octacapture just for the DAW, and only for it. So I don't want to use it in a multiclient way.
Thanks
-
Back in WDM, it works.
Very surprising that I can't make ASIO running well
-
Yes it is the same.
I tried to open an old project and a demo song from Cakewalk and now I have sound.
But when I open my actual project, I get this error message again
Coult it be possible that I have a problem in a project ?
This one uses Play by east West (3 instances) and Aria by Garritan (just a piano sound for sketching)
I have 16 Go RAM.
Thanks
-
Thanks you for trying to help.
The problem is I don't have any other device using my interface, no other software opened.
In windows, where can I see if the sample rate is ok ?
In Cakewalk, I usually set it to 44.1
Thanks
-
I just checked again in windows, I saw that in recording, it was in 16 bits, so I set all to 24 like in Cakewalk.
Once in CbB I set again to ASIO, and then ... when I play, ... NO SOUND ...
Here is the screenshot, you can see signal in green, but can't hear anything.
-
Hi Noel,
Thanks for helping. Is 24 bits the best sample rate to use in a DAW ?
I set Cakewalk to 24 and went to windows to set all my audio devices do 24.
I first used octa-capture for both DAW and windows sound, but then, advised by Roland, I set my default board device to windows sound, and my octacapture only for DAW but that doesn't work either.
I edited all I can in windows parameters to be sure that all parameters were the same in windows and in Cakewalk.
I uninstalled Roland drivers about more than 20 times with no success ...
Hope someone can find the problem, I'd like to have stability again, hard to work ...
Thanks
-
One last thing, I tried to go back to ASIO mode and then, as I said in a previous post, I had an error message.
I decided to open CbB on an empty project, no error message. Then I loaded an old project file with some virtual instruments and audio, I could hear the music. Then, I load the project file I'm working on, and, ... guess what : No sound (but no error message).
Then I went back to WDM, and ... Sound is back.
I really don't understand what's happening to my system, it might be a simple thing that we don't see.
Thanks to all for trying to help me.
-
18 hours ago, Noel Borthwick said:
I wonder if your focal 50 being plugged into your PC is causing a problem because that is presenting itself as an audio interface as well.
No, the Focal 50 are just plugged in my octacapture, just as monitors, not plugged in the PC.
-
I tried to go back to ASIO mode and here is the error message again ...
I attach the minidump file generated.
As I see the name of the dll file, it is about the octacapture.
-
On 3/15/2019 at 12:12 PM, synkrotron said:
I notice that you are still on Windows 7. Have you installed the latest Roland driver from here:
Yes, that's what I've done as soon as I bought the device
Here is the screenshot of the octacapture settings
-
And the others, for the preferences in CbB.
Adviced by Roland support, I actually set my OctaCapture to work in WDM.
-
-
Yes, I've done that.
What is very surprising is that the problem occurs once, and then I can play the music, and then problem again, etc ...
So, I don't understand why 50% of the time I get this error message and not 100% or 0% ...
I'll try what you advice, but later on, back to work now (french music teacher it 12:00 in France)
Thanks
-
Thanks everyone for trying to help me.
10 hours ago, synkrotron said:Could you please provide more information about about your system, its configuration and the problem you are having?
I'm running a PC with i7-2600K, CPU 3.40 GHz, 16 Go RAM, Windows 7, SSD for system, 1 To HDD for libraries, 1 To HDD for projects.
34 minutes ago, msmcleod said:If you've got an on-board sound device, make sure that is enabled and assign Windows sounds to that.
That's done. First, someone told me to disable the onboard sound device in the Bios, finally I unabled it again yesterday and assigned Windows sound.
34 minutes ago, msmcleod said:Disable all of them
I'll try that, disabling the digital outputs and inputs.
34 minutes ago, msmcleod said:if you are using WDM, make sure Cakewalk is only using your Octa-Capture.
I disabled all other sound devices (on-board) in Cakewalk.
34 minutes ago, msmcleod said:I plug mine directly into my 27" monitor as it has audio inputs.
That was my idea, I use Focal 50, and I can plug my PC output directly in it. Or maybe I can use my old Tapcoe S5 by Mackie, which I don't manage to sell. They could be used only for that kind of purpose ...
For the image, I'll see how I can do ...
Does that work ? https://ibb.co/GxHPs2z
- 1
-
Hi,
Does anyone use Cakewalk by Bandlab with Roland OctaCapture ?
I bought it at the end of decembre and I still have problems with it, I was losing sound in my DAW very often, forced to shutdown the card down then swith it on again !
I contacted roland's support, yesterday they told me to try WDM instead of ASIO. It seemed to work, as I didn't losed the sound any longer, but now, I get a message from time to time (I would say nearly 50 %), telling me that audio device could be in use somewhere else. Then I click OK and next time, the music will play ...
Any idea of the solution ?
I try to post a link as well for the screenshot as last time, someone on the forum told me to do this because he couldn't see anything with my image.
https://drive.google.com/open?id=1ynNlwkRVQBv1NauAvP5VAX1owm7I_IXJ
Thanks
-
Thanks you so much !!! That was the problem, the track control was set to custom and not to all, so I couldn't have the MIDI channel selection available.
Now, back to work !
Thanks again
(But one more thing I have to fix, I'm loosing the sound of my sound card very often, Roland OctaCapture, don't know why, I often have to shut it down then on again, I'm in contact with Roalnd Corp.).
-
4 minutes ago, seadude said:
Try highlighting the instrument you want to play in Play? And then select that midi track in Cakewalk?
Doesn't work
-
I went back to my Sonar 8.5, and it works ! (but only in 8.5)
I inserted an instance of Play, loaded just two instruments and on each track of Cakewalk, I can select which MIDI channel I want, and then hear the sound I want.
I still can't find this in Cakewalk by Bandlab.
Here is a screenshot of Sonar 8.5
Thanks
-
-
Hi,
I made a small orchestral template with East West symphonic orchestra gold in Cakewalk by Bandlab.
I can't figure out why if I go on many different tracks, I still can only hear the flute sound which is my channel 1 sound.
I checked in the play engine, I set all instruments on a different midi channel, but in Cakewalk I can't see where the midi channel is, maybe it is the problem.
I created another track with another virtual instrument (not EW) and it works, I can read it.
Hope you can help me.
Thanks
Crash during playback
in Cakewalk by BandLab
Posted
Here is a link with a better image
https://imgur.com/dzKAGTh