Leaderboard

Digital Synsations Get UVI Digital Synsations free until April 30th, add to cart and then use coupon code: INA-FREEDS

I’ve got the single seater 4 wheel drive version. Mine’s a daily driver.

Fleer and Mesh got to me then Larry's track finally pushed me over the edge! Finally joined the FF club with Pro-Q 3 .

Already done did...and got a GREAT price! I used all three on this Track ( a shameless plug - in)

Just picked this up because right now anything that can make sense of the rats' nest of samples I have is welcomed. Discounters knocking off $20 to $27, your preferred shop may also if you ask.

Whoa, did they jus drop like it's hot?

Well you do get 3 activations per license per UVI, so I would say that you are well covered now!

I bought it for $20 at a flash sale.

Thanks! Always worth getting a second copy for my mobile rig.

The only reason I would get Mixcraft would be to support the 'little guy'. I don't see anything that would make me change DAW at this point, but I do appreciate their 'human' support. Their bundles might be appreciable for a starter who doesn't have a HD full of VSTs. I wish them lots of luck in this cut-throat world of DAWs.

It's a nice DAW for the money.

Poor Kenny... is right ...I never even got to hang with her . Duke beat me to it . Kenny

Totally agree. Great job and only with your phone!

I got this a while back - it's a good one

I was about to say try setting the Lens to None ..i have had trouble with track folders when using my lens I made..everything goes a bit screwy

Your welcome?

Well, pretty much the same thing, ya? Bits can only be "On" or "Off!" ?

This is the first thing I've heard today, and I can't get this out of my mind. That's quite an evolution over time, and one that many of us have made, too. I hope you find success with this song because it deserves it. Two thumbs up!

Only 40? Then you definitely need this one. Then when you hit an even 100 you can start working on reverbs. Or compressors. Or tape saturators. Or preamps. Or limiters. I don't care what those doctors say, it's not a problem.

I actually think people selling their V6s for a very low price are wrong. Arturia offered some ridiculous bargains on V6, hinting that V7 was on the horizon. But now that V7 is out, the only way to get V6 is second hand. V7 is $400 and it only has 3 new instruments, out of 20+. Once the meth addicts sell their V6s for cheap the price should come up. I mean, this is your choice: $250 for V6 or pay $150 more for three more synths.

All that just to drone on and on and on?

I will keep my fingers crossed Fleer ?? Now to decide over Pro Q-3 before the deal is over!

The simplest answer is the most likely. Stray keyboard hits with unintended consequences you didn't recognize.

Found a pic of Andy in his studio doing some troubleshooting.....

I thought I had double checked every routing source. I could hear everything; it was doubly confusing. So in Console Mode I inserted all the modules, and what do I see in the Send Module? A routing to a Reverb bus whose output was set to...NONE. I wasn't doing anything with that bus yet, and had never gotten the pop up before, but oh well. I love it when the solution is simple. Now, don't ask me how the send got changed. Maybe I set it up wrong to start with, but that would mean the pop up was tardy. Who cares? I'm so happy it's working!

The simplest things played in time sound a thousand times better than the most complex things played out of time! Bill

I just upgraded to AL4. I ran the Arturia installer on the background.... not only I had my DAW open, I was working on a project that contained one instance of AL3 because 1) I'm a genius and 2) Why the hell not? Well, the installation finished after I closed Reaper and after that I could not open my project. Reaper kept crashing right at the moment of loading AL. Oh boi. I had to perform open heart surgery on a copy of the project file with a text editor to manually remove AL3. Thank god everything is working OK now. Phew. PSA: Don't be like me. PS I found the Genesis pack for free in the in-app store.

Will have to watch when I get home. Buffering too much over here at work. I didn't know about the color/grouping thing. That would be really cool.

Thanks for your concern, Paula. I went into the Preferences menu today and changed the Cakewalk.ini file as suggested by Pathfinder above. It got rid of the nasty little message and the projects still all do what they're supposed to do. As far as your interface, I took a look at your current mixer/interface and it looks to me as if you have a better setup with that than you would with a Focusrite. INHO, Focusrite is overrated anyway. Years ago I used a Line 6 Pod Studio UX2 and then I "upgraded" to a Focusrite Scarlet 6i6 (1st generation). Sometimes I think I should've stuck with the UX2, but the Focusrite did come with a nice bundle of plugins, so I can't complain. If I were you, personally, I'd stick with the Behringer mixer if it's working for you. ?JB

The ability to create your own 'tapes' with the Mellotron plugin is cool. I could myself getting lost in that for awhile. Still on fence about update. Now if price included (and it doesn't) Pigments...

Very cool! Thanks Zo ?

Hollow waveform means it is muted. Drag the mute tool over the hollow section to unmute. I believe the top half of the clip unmutes while the bottom half mutes it. I don't have CbB open to check, it could be opposite.

Great vid, Zo!

Here's a video about How to set up XO withing Maschine !! Be absolutly sure to watch until the end , specially for group setting loading in maschine or you wiull be frustrated as hell !! Also notice that what i did here is what you would do with any multitimbrale instruments in maschine (from battery to Sonicouture Electro acoustics to Aave Alchemy Revolution ... any kontakt stuff ect .. Thks For watching and for requesting this video Hope you guyz enjoy this one

Hi , this is my take on Xln audio XO , a superb concept and greatly implemented . In this video i cover : 1) Concept 2) How to import and scan samples . 3) Kit creations 4) Pattern creation 5) Beat Combiner and sample combiner randomness 6) Routing in daw (multi out) and Midi export (@ 21 min) 7) Factory content kit tour (at 29 min) ? Conlcusions . Thks For watching and don't forget to like and sub if you feel like so . Hope you enjoyed . Featuring Wave Alchemy samples ...

Don’t think they have them all, Zo, but more than enough. Turn the delay down and you get the essence of Metric Halo Character.

That free Dirty Delay seems interesting as well as a character plugin on its own (turning the delay itself all the way down).

I thought this was a good one since it's not a duplicate of another effect. Odd though buying this and getting another effect. It gives you a chance to see what a MH product is like. Not a fan of the iLok only one authorization scheme so no more MH for me. I find IK's install everything annoying. I usually zip those not authorized and unzip them instead of their installer.

Good spot Piotr, lol. Yes I meant Mic Room, doh! I don't have King's mics either. I have corrected my post now.

Watch out when you’re ordering. You’ve got to add that freebie Delay to your cart yourself. Someone at KVR found out the wrong way.

Don't even hesitate Mesh....you won't regret it...other than, after using it, you'll want the others...?

Yep, the Fabfilter Pro Q 3 is a real monster , means it´s affordless to cut a signal in the frequencies. For mastering and busses (groups ) and for narrowband signal cutting aso even the Pro Q 1 was my go to plug. If I need more "color and harmonic distotion there are other eq´s -Neve and SSL clones which make the sound bigger. The Fabfilter Q3 without the dynamic features "sounds" very neutral to my ears.

So sad. I really used to think that this was a pretty decent group of really helpful people. Now, not so much, especially looking at threads like this. But I guess it's just that the virtual world mirrors the real world in that there are always a few a$$holes in a RW club/organization. It's the same in the virtual world too. Unfortunate. If you don't want to watch a guy's tutorials, for whatever reason, just don't watch them. If he's acting like a crybaby, ignore him. I'm sure we're all better than the actions of some of the folks who've participated in this thread. Is it too much to ask to act civil and respectful to each other? We all have a common interest and a love for music. We should be helping each other instead of putting the other guy down. ?JB

My wheels... ...just kidding! But I did have a set of these wheels a few years back during a stay in the hospital. All better now! I'm old, but not that old! Ha! But due to cclenny's deals, I may need to switch back to these when my current car wears out!