Sonar 2025.09 Feedback

[George D]

Exactly like yours template. The same time/same settings, older Cakewalk shows 0%.

[Wookiee]

17 minutes ago, George D said:

Exactly like yours template. The same time/same settings, older Cakewalk shows 0%.

Can you share your system specs, I am using a tablet and Android doesn't share the signature. 

[George D]

50 minutes ago, Wookiee said:

Can you share your system specs, I am using a tablet and Android doesn't share the signature. 

AMD 3950x, 32gb ram, 2X NvME

[Wookiee]

2 hours ago, George D said:

AMD 3950x, 32gb ram, 2X NvME

And the audio device? 

[George D]

20 hours ago, Wookiee said:

And the audio device? 

Usb - Antelope Discrete 8

[David Baay]

On 11/9/2025 at 10:27 AM, George D said:

The same time/same settings, older Cakewalk shows 0%.

In Sonar the plug-in-powered audio metronome causes a 3-4% Engine Load on my laptop. SONAR Platinum, which used a less 'critical' load-measurement algorithm, shows only a tenth of a percent. I don't have CbB on this machine to check. I believe it used the same performance measurement algorithm as Sonar so should show the same idle load with the audio metronome enabled. If not, this might be something the Bakers should invetigate. I'll check my other machines that do have CbB.

EDIT: I verified Sonar and CbB show roughly the same numbers on my desktop DAW:

Audio Processing: 0.1 to 0.2%

Engine Load : 1.5-2.5%

And Platinum only shows the Audio Processing measurement at about the same level. 

Switching the  Metronome to MIDI zeros the load in all of them.

Edited Tuesday at 09:03 PM by David Baay

[George D]

19 hours ago, David Baay said:

In Sonar the plug-in-powered audio metronome causes a 3-4% Engine Load on my laptop. SONAR Platinum, which used a less 'critical' load-measurement algorithm, shows only a tenth of a percent. I don't have CbB on this machine to check. I believe it used the same performance measurement algorithm as Sonar so should show the same idle load with the audio metronome enabled. If not, this might be something the Bakers should invetigate. I'll check my other machines that do have CbB.

EDIT: I verified Sonar and CbB show roughly the same numbers on my desktop DAW:

Audio Processing: 0.1 to 0.2%

Engine Load : 1.5-2.5%

And Platinum only shows the Audio Processing measurement at about the same level. 

Switching the  Metronome to MIDI zeros the load in all of them.

In my case nothing is on.

[David Baay]

2 minutes ago, George D said:

In my case nothing is on.

You have Metronone set to Use MIDI? If it's set to Use Audio, the plugin that drives it will be active and using CPU.

[George D]

No. It's audio.

[David Baay]

7 hours ago, George D said:

No. It's audio.

So are you still questioning why you see a slight load? As I said, I see no difference in Audio Processing or Engine Load between CbB and Sonar, and Platinum only showed the lower Audio Processing number that you might be used to. It was never zero with the Audio Metronome enabled in any release.

[George D]

20 hours ago, David Baay said:

So are you still questioning why you see a slight load? As I said, I see no difference in Audio Processing or Engine Load between CbB and Sonar, and Platinum only showed the lower Audio Processing number that you might be used to. It was never zero with the Audio Metronome enabled in any release.

You didn't read my first post. Everything off. Zero meter on windows 10 but in windows 11 there is big activity.

At the same time Bandlab showed 0%  in win10 and now in win 11.

[Wookiee]

21 hours ago, George D said:

You didn't read my first post. Everything off. Zero meter on windows 10 but in windows 11 there is big activity.

At the same time Bandlab showed 0%  in win10 and now in win 11.

Would I be correct in saying you comparing two different machines?

Question have you checked what the Performance Module is showing, it can show three different types of activity.

See page 590 of the reference guide for more information about what the Performance Module is showing.

1. Audio Processing 

2. System performance, (that is global, not just the app)

3. Overall App Performance. 

[Jerry Gerber]

I'm having an issue with this release.  I am not 100% sure it's a bug but I've never seen this behavior before.  While composing and sequencing, one of the MIDI tracks, #14 out of 14 tracks, suddenly gets hidden.   I've never made a shortcut key to hide a track, if that's even possible.  

Is any one else seeing a track suddenly get hidden in track view?

I haven't yet become aware of the steps that have to happen before this occurs, however I'm paying attention to it.

Thanks,

Jerry

www.jerrygerber.com

 

 

 

Edited 4 hours ago by Jerry Gerber