Jump to content

WHY does Sonar Record in the wrong place???


chamlin

Recommended Posts

In my project, I set my loop, then within the loop, I set the record punch section. Record. Works fine. Then, without touching any settings, I hit record again, but this time, my recorded tracks are offset 7 measures forward, which results in the recording being misaligned, and 7 measures not recording. This is a persistent bug which has f'd up several great takes. Been using Sonar since day 1 and this has been happening ever since I "upgraded" from the free legacy Cakewalk to Sonar. Help?

Annoying Misalignment2.jpg

Link to comment
Share on other sites

9 minutes ago, chamlin said:

Thx, Greg. That is exactly what I'm doing!

You said set the punch in, that is not required if you are using the loop/comp recording that @57Gregy suggested. 

1. You set a loop points.

2. You enabled/arm the track for recording with the comp method selected, which is the default method.

3. Press the R to start recording each loop is recorded in its own take lane. No punch in needs to set.

  • Like 1
Link to comment
Share on other sites

12 minutes ago, Wookiee said:

You said set the punch in, that is not required if you are using the loop/comp recording that @57Gregy suggested. 

1. You set a loop points.

2. You enabled/arm the track for recording with the comp method selected, which is the default method.

3. Press the R to start recording each loop is recorded in its own take lane. No punch in needs to set.

Thx, Wookie. I set the punch in / out because I want the loop to play a wider range than I'm recording to give me runway to be ready. That shouldn't cause this issue, should it?

Link to comment
Share on other sites

38 minutes ago, chamlin said:

Thx, Wookie. I set the punch in / out because I want the loop to play a wider range than I'm recording to give me runway to be ready. That shouldn't cause this issue, should it?

I think setting 2 loops, basically, is messing something up.

Link to comment
Share on other sites

14 minutes ago, 57Gregy said:

I think setting 2 loops, basically, is messing something up.

If that's the case, then how does one do punch comp recording with enough lead in to best time when to come in... without recording on top of the existing track?

 

Link to comment
Share on other sites

@chamlin punching in is an old method used with tape machines, it was used to literally punching in over the top of pre recorded takes overwriting , destroying, what was there.

With a modern DAW, there is no need to punch in. Just set your loop points as wide as you need. Then use comp recording mode to record as many takes as you need. Then using the comp function described on page 454 of the Sonar reference guide, you can not only pick the best take but pick the best bits of all the takes.

Link to comment
Share on other sites

@chamlin - not seeing any issues with that workflow here.

I set an 8 measure loop, with a 4 measure punch in/out in the middle, and it's correctly recording the 4 measures every time.

What might be the issue, is:

"Then, without touching any settings, I hit record again, but this time, my recorded tracks are offset 7 measures forward, which results in the recording being misaligned, and 7 measures not recording"

Check your "On Stop, Rewind to Now Marker" setting in TV Options.  If this is unchecked, and you don't touch anything before pressing record again, then recording will start where you left off (assuming that's between the punch points).

I'd recommend either:

- Making sure  "On Stop, Rewind to Now Marker" is checked, and ensuring the now time is at the beginning of the loop before you start recording (pressing W once or twice will ensure this).  Then when you stop, it'll automatically rewind back to the beginning of the loop for you, so you can immediately press R.

OR
 
- Get into the habit of pressing W before pressing R again so you start at the beginning of the loop.


If neither of these solves your problem, please post a video of what is happening ( Screen2Gif  is a free and easy to use utility for grabbing screen videos).  Be sure to record the whole screen, as the state of other options in the control bar may give us a clue to your setup and what could be causing the issue.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...