Serious problems with new computer, evo 4 audio card and cakewalk.

[giant ll]

22 hours ago, John Vere said:

Go to manufacture web site and download and install the audio driver carefully following instructions. 
Go to settings/ Sound and check that Evo 1/2 are enabled and the default input and output devices. 
Disable all other devices listed both input and output. 

Go into advanced settings and choose your sample rate that you set in the Evo control panel. 
There’s a test tone you can confirm that everything is working and you have your monitors left and right connected properly. 
 

In Sonar preferences audio first select ASIO. 
Make sure no other devices are listed or checked. You want to only see the Evo on all the audio settings tabs including sync and caching. 
 

If there’s any sign of a generic ASIO driver remove them in the RegEdit App. 
 

Waveform is a free Daw you can use to test as well. 
 

In Cakewalk, Preferences Audio/  Record and Play/ modality driver what do i have to select?

 

Ok. I got Waveform. Never used before, i can try to use it and make some tests

 

Edited Sunday at 02:10 PM by giant ll

[giant ll]

When i restart computer it say that  EVO4 is disconnected.. i have to plug in and out the usb cable... to make Cakewalk see the soundcard. After works better..

But it seems that windows see EVO withouth this. I found it strange.

It seem there is also something in USB that create problems.

 

Edited Sunday at 07:54 PM by giant ll

[JonD]

Try a different USB port   (You're not still connected on the hub, are you?)

Also, USB can sleep as well.  As suggested earlier, change to High Performance, and to play it safe, go to Advanced and DISABLE all SLEEP settings (Change to NEVER).

[giant ll]

6 hours ago, JonD said:

Try a different USB port   (You're not still connected on the hub, are you?)

Also, USB can sleep as well.  As suggested earlier, change to High Performance, and to play it safe, go to Advanced and DISABLE all SLEEP settings (Change to NEVER).

Ok. I'm sorry if i go a bit slow because some bugs are not everytime, and when i change something.. i have to wait that the bugs comes out before changing other things, to determinate exactly the problem. So i could be slow to apply some reccomandations but i take it in consideration, also if they are written upstairs.

Answer:

Yes. Try different port was also really important. 

I had the audio card connected to one Hub connected the USB port of the Case of computer.

Now i have connected Audio Card to an Hub  and 2 Hard disk to another directly connected to the mainboard USB port.

Computer is working much better..

I'm not sure about USB in case.. i've connected only the mouse there. I have to check the case USB ports in general and i'll make soon. 

I've selected ASIO in settings, and making some changing in options.

Now the program seem working well.

I've also changed an old Toshiba HDD external with a SSD external, is more quick and so.. different changings i'm making in this days.