greg54 Posted August 29 Share Posted August 29 When I record vocals, the mic pre that I've been using (Warm Audio WA12 Mkll) sounds like it feeds back with some consonants. I tried turning the gain way down, but when I sing certain consonants, it's like it feeds back (slight ringing). It's not the mic, because it does it with every mic I use. And I have a little vocal booth I made. I'm thinking it's the mic pre. Maybe someone has an idea of what the issue could be. Or perhaps a recommendation for a better mic pre. Link to comment Share on other sites More sharing options...
OutrageProductions Posted August 29 Share Posted August 29 The cheap 'Cinemag' transformer that they used in the signal path was notorious for de-laminating, sometimes causing ringing. Beg, borrow, or steal a different mic pre to confirm. 2 Link to comment Share on other sites More sharing options...
greg54 Posted August 29 Author Share Posted August 29 Suggestions for a decent mic pre? Link to comment Share on other sites More sharing options...
jackson white Posted August 29 Share Posted August 29 (edited) 23 hours ago, greg54 said: Suggestions for a decent mic pre? my goto atm is the Camden EC2. if ur not unduly influenced by herd marketing, ART has several options which do well for their price range. Edited August 30 by jackson white sp... 1 Link to comment Share on other sites More sharing options...
greg54 Posted August 29 Author Share Posted August 29 I've been looking at the Camden EC1. Thanks! Link to comment Share on other sites More sharing options...
mettelus Posted August 29 Share Posted August 29 4 hours ago, OutrageProductions said: The cheap 'Cinemag' transformer that they used in the signal path was notorious for de-laminating, sometimes causing ringing. Beg, borrow, or steal a different mic pre to confirm. Another thing you can try to confirm quick is another environment to confirm it is also persistent outside of the vocal booth to eliminate resonance in the booth as a factor. 1 Link to comment Share on other sites More sharing options...
greg54 Posted August 30 Author Share Posted August 30 I had the mic in a closet a while back. Same issue. Link to comment Share on other sites More sharing options...
OutrageProductions Posted August 30 Share Posted August 30 7 hours ago, greg54 said: Suggestions for a decent mic pre? I use either an Avalon or a VoxBox which are out most folks price range. However, I used to have one of these for use with my laptop on location which worked pretty well. They were only $99 back in the day...(sigh) 2 Link to comment Share on other sites More sharing options...
Alan Tubbs Posted August 30 Share Posted August 30 I haven’t had a problem with original warm. Or the tone beast. Perhaps you can check against your standard interface pre? If the Warm is the problem I would complain to them. The are (were) very responsive and used to go out of their way to be helpful. 1 Link to comment Share on other sites More sharing options...
greg54 Posted August 30 Author Share Posted August 30 1 hour ago, Alan Tubbs said: I haven’t had a problem with original warm. Or the tone beast. Perhaps you can check against your standard interface pre? If the Warm is the problem I would complain to them. The are (were) very responsive and used to go out of their way to be helpful. I've had the WA12 for about 3 years, so it's not under warranty. At this point, I don't know what they could do. The WA12 sounds better than my interface. I just don't like the ringing it does on certain consonants. Link to comment Share on other sites More sharing options...
jesse g Posted August 30 Share Posted August 30 (edited) I have two WA 1073 EQ micpres from Warm Audio for some time now and I've never had a problem with them or their Cinemag transformers. I also have a Presonus Eureka which is still going strong and a Focusrite ISA One, however, I reach for the WA 1073 EQ first usually. Contact Warm Audio so they can assist you in troubleshooting the problem. Personally, I love WA Products Edited October 24 by jesse g 1 Link to comment Share on other sites More sharing options...
Jim Roseberry Posted October 23 Share Posted October 23 I've got a pair of WA273-EQ preamps (four channels). One of the two developed an intermittent noise issue (early on... so Sweetwater swapped that out). Haven't had a single issue since. For the cost, they're hard to beat. Link to comment Share on other sites More sharing options...
Alan Tubbs Posted October 26 Share Posted October 26 The Newton is a reasonably priced RND channel strip with an excellent pre. The isa one is good and cheap, relatively for a standalone. It isn’t as thick sounding as the wa76. But I found that putting a nice transformer somewheres in-line can help get “that sound” without a +$500 pre. But again, you are going to be spending that much per a channel on a decent comp or eq, so …. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now