Scott Mallard Posted July 11 Share Posted July 11 Has anyone run into the problem where some projects take a long time to close? I've pulled up 'Task Manager' during a few of these slow-close events and noticed that the 'Memory' associated with Sonar takes a long time to purge. It's not until this memory has purged that Sonar finally finishes the closing of the project. The more memory that is used for a project, the longer it takes to close. In the meantime, I get this message from Sonar: The application is not responding. It may respond again if you wait. I usually just wait until it finally closes. Any suggestions on how to improve project closing time and memory purge? Link to comment Share on other sites More sharing options...
msmcleod Posted July 11 Share Posted July 11 This is most likely due to plugins freeing up their memory before closing - like you say, the more memory that is being used, the longer this will take. VSTi's such as Kontakt have a "purge" option to remove all samples - you could try using this before closing. You could also try setting sample based synthesisers to load samples on demand and/or limit the amount of memory they can use for samples. Not only will this speed up the closing of projects, it may also speed up project load. The only downside is possible delays in loading the samples on first playback (unless you have very fast RAM / SSD), but it is only on first playback - subsequent plays should be fine. 1 Link to comment Share on other sites More sharing options...
Scott Mallard Posted July 11 Author Share Posted July 11 Thanks, msmcleod. I am aware of the sample "purge" options you mentioned. I will explore (and use) them more thoroughly in some of the VSTis I use. I use many Spitfire Audio orchestral samples and I know that some of these are massive. I've got plenty of RAM to load/unload since I have 128GB - lol. I'm a paid user of Sonar and I must say that I'm enjoying using it so far. Thanks for all your work! Link to comment Share on other sites More sharing options...
John Vere Posted July 12 Share Posted July 12 I noticed this happened when Sonar was crashed. It would crash but I couldn’t re open it. I would find it in Task manager way down the list. I would have to reboot computer to kill. Link to comment Share on other sites More sharing options...
Promidi Posted July 12 Share Posted July 12 35 minutes ago, John Vere said: I noticed this happened when Sonar was crashed. It would crash but I couldn’t re open it. I would find it in Task manager way down the list. I would have to reboot computer to kill. Could "taskkill /im Cakewalk.exe /F" save a reboot? (or replace "Cakewalk.exe" for whatever exe has hung) Link to comment Share on other sites More sharing options...
John Vere Posted July 12 Share Posted July 12 I originally was having the crashing issue and submitted the reports. Support recommended a clean install. Since then only crashes were related to experimenting with the Cakewalk Exchange files between Next and Sonar. I submitted those and they are looking into that. But both Sonar and Next hang up on crashing for me. Link to comment Share on other sites More sharing options...
OutrageProductions Posted July 12 Share Posted July 12 (edited) Have you ever tried to power cycle your audio interface for a ten count when it hangs? Edited July 12 by OutrageProductions Link to comment Share on other sites More sharing options...
Glenn Stanton Posted July 12 Share Posted July 12 also - depending on the number of file handles open - content, audio, separations, and including the directories as well as any cloud services which may have locks while they replicate to the cloud can also result in longer times to release the memory. i remember a few years back that people who enable always open all devices could run into situations where many files (most not used) would be created, leading to long start up and shutdown. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted July 13 Share Posted July 13 On 7/11/2024 at 3:02 PM, Scott Mallard said: Has anyone run into the problem where some projects take a long time to close? I've pulled up 'Task Manager' during a few of these slow-close events and noticed that the 'Memory' associated with Sonar takes a long time to purge. It's not until this memory has purged that Sonar finally finishes the closing of the project. The more memory that is used for a project, the longer it takes to close. In the meantime, I get this message from Sonar: The application is not responding. It may respond again if you wait. I usually just wait until it finally closes. Any suggestions on how to improve project closing time and memory purge? If you have a reproducible case send the project file and also capture a dump file from task manager while it appears hung. That may show what operation is taking long. Link to comment Share on other sites More sharing options...
Scott C. Stahl Posted September 17 Share Posted September 17 On 7/13/2024 at 9:35 AM, Noel Borthwick said: If you have a reproducible case send the project file and also capture a dump file from task manager while it appears hung. That may show what operation is taking long. This happens with every large project for me as well. I wind up selecting "No" just to get the annoying window out of my way and just wait till sonar finishes it's bookkeeping. sometimes have to click "No" thru 2 cycles. Really long closing times have been happening for quite a while now... since at least later versions of CWbB. If I do not wait till it finishes the close, CW does not even "Remember" that I had the project open previously. More and more I find myself opening projects direct from windows explorer just to make sure I'm opening the last project I was working on and not some earlier version Link to comment Share on other sites More sharing options...
Max Arwood Posted September 18 Share Posted September 18 “More and more I find myself opening projects direct from windows explorer just to make sure I'm opening the last project I was working on and not some earlier version“ I have to keep reminding myself about this! File open and sort by date reverse. It’s sad when you finish touching up v21 and it is sounding so good , but you do a save as to increment the number and you see v23, v24! Lol 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 18 Share Posted September 18 There is a new feature coming in the next release that would help with this very issue. 5 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now