sjoens Posted March 6, 2024 Share Posted March 6, 2024 Thanks. Mine does not exhibit that behavior but works as expected. Something is clearly wrong with the way yours behaves, tho. Link to comment Share on other sites More sharing options...
David Baay Posted March 6, 2024 Share Posted March 6, 2024 (edited) On 3/6/2024 at 10:05 AM, Heinz Hupfer said: Could you please confirm that when you drag the Transform Box (modify the CCs) to left or right, the selection of the CCs gets lost. Expand If you drag the sides of the box between the transform nodes, you will change the selection range. Make sure you're seeing the different cursor that appears over the nodes before dragging. And if you do inadvertently change the selection, you can just drag between the nodes again to reset the range rather than disabling the transform tool and re-selecting. Edited March 7, 2024 by David Baay Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 (edited) Looks to me like the cursor is changing to the right one but the associated function isn't happening. However it's not clear which cc he's working on, if it matters. Edited March 7, 2024 by sjoens Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 (edited) That pesky Aim Assist Line still lingers into other MultiDock views when switching from Track View. Tip: Place AAL (cursor) at point zero before switching. Edited March 7, 2024 by sjoens 1 Link to comment Share on other sites More sharing options...
David Baay Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 2:14 AM, sjoens said: Looks to me like the cursor is changing to the right one but the associated function isn't happening. However it's not clear which cc he's working on, if it matters. Expand Yes, I see that now, though many times it looks like he's missing the hotspot. Looks like Modulation controllers but shouldn't matter. I've not used the transform tool that much but played around for quite a while and couldn't replicate the problem. I know in that past there have occasionally been issues that affect only some localizations - possibly this is one of those. Otherwise maybe a mouse driver/display scaling issue. Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 I do have the same visual issue as Heinz where sometimes the cc's are displayed while stretching and sometimes they're not. Purely cosmetic, tho. Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 A new graphic issue: When opening a project saved in CbB, the Inspector bleeds thru from underneath MultiDock views. Link to comment Share on other sites More sharing options...
petemus Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 7:08 AM, sjoens said: That pesky Aim Assist Line still lingers into other MultiDock views when switching from Track View. Tip: Place AAL (cursor) at point zero before switching. Expand Or hit the X key twice (or whatever key you have Aim Assist bound to). The first press cleans up the remnants of it from the screen and the second turns it on, but does not show it. 1 1 Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted March 7, 2024 Share Posted March 7, 2024 (edited) On 3/7/2024 at 7:09 AM, David Baay said: Yes, I see that now, though many times it looks like he's missing the hotspot. Looks like Modulation controllers but shouldn't matter. I've not used the transform tool that much but played around for quite a while and couldn't replicate the problem. I know in that past there have occasionally been issues that affect only some localizations - possibly this is one of those. Otherwise maybe a mouse driver/display scaling issue. Expand HI:) I used Modulation, just the first CC I found:) Transform does always work with Velocity, but often not at all and visual result is displayed only sometimes! Opened an older Project and Transform refuses to work. No chance: I've sent this file to the bakers but got never an answer! (2 years ago! I the switched to Reaper) Bassman. Edited March 7, 2024 by Heinz Hupfer 1 Link to comment Share on other sites More sharing options...
Ben Staton Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 8:20 AM, sjoens said: A new graphic issue: When opening a project saved in CbB, the Inspector bleeds thru from underneath MultiDock views. Expand Does this happen every time you open the project? If so, please can you PM me a copy of it? Link to comment Share on other sites More sharing options...
Will. Posted March 7, 2024 Share Posted March 7, 2024 (edited) On 3/7/2024 at 8:20 AM, sjoens said: A new graphic issue: When opening a project saved in CbB, the Inspector bleeds thru from underneath MultiDock views. Expand Whats your refresh rate of your monitor? Are you using onboard graphics or a dedicated one? Try to update all your VCredist files - old versions and new versions. Edited March 7, 2024 by Will. Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 8:20 AM, sjoens said: A new graphic issue: When opening a project saved in CbB, the Inspector bleeds thru from underneath MultiDock views. Expand Figured out what the repro is, it only happens when the dock is the full screen width rather than the default width. It's logged on our end. Thanks! Link to comment Share on other sites More sharing options...
John T Posted March 7, 2024 Share Posted March 7, 2024 Just downloaded this and had a poke around. Seems promising. Overall, I like the flatness, though of course, it's still a bit raw in its present version. Link to comment Share on other sites More sharing options...
Terry Kelley Posted March 7, 2024 Author Share Posted March 7, 2024 (edited) On 3/7/2024 at 3:08 PM, John T said: Just downloaded this and had a poke around. Seems promising. Overall, I like the flatness, though of course, it's still a bit raw in its present version. Expand Yeah, that’s a good description: raw. But so far I haven’t run into any issues other than readability which is something a good theme could fix. Edited March 7, 2024 by Terry Kelley Link to comment Share on other sites More sharing options...
Terry Kelley Posted March 7, 2024 Author Share Posted March 7, 2024 (edited) Maybe someone can try this and confirm: 1. Select an Audio track 2. Click on properties 3. Click on Audio Snap 4. Check the Enable box 5. Check the Follow Project 6. Select another Audio track and do the same 7. Go back to the original and see if the Follow Project box is still checked. A couple of times the box wouldn't show the check mark until I moved to a different track and then back. There is always a slight delay before the box is refreshed while it does the audio snap, but in this case it just never showed up until I flipped back. Minor but could be me too. Usually is! Edited March 7, 2024 by Terry Kelley Link to comment Share on other sites More sharing options...
David Baay Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 5:29 PM, Terry Kelley said: A couple of times the box wouldn't show the check mark until I moved to a different track and then back. Expand Not seeing that here; check mark appeared immediately on the first track and persisted when enabling another track and switching back. Tried several times with different tracks. 1 Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 4:23 PM, Terry Kelley said: Yeah, that’s a good description: raw. But so far I haven’t run into any issues other than readability which is something a good theme could fix. Expand HI:) Here on 4K I find all Fonts are very good readable, much better than in CbB! Nearly everything is in White not grey, pretty good! Bassman. Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 2:27 PM, Jonathan Sasor said: Figured out what the repro is, it only happens when the dock is the full screen width rather than the default width. Expand Yeah, sorry forgot to mention that. Won't happen if views don't overlap. My standard screenset has always been full screen MultiDock. Link to comment Share on other sites More sharing options...
sjoens Posted March 7, 2024 Share Posted March 7, 2024 On 3/7/2024 at 6:11 PM, Heinz Hupfer said: Here on 4K I find all Fonts are very good readable, much better than in CbB! Expand Some Control Bar fonts are actually smaller than in CbB. Link to comment Share on other sites More sharing options...
sjoens Posted March 8, 2024 Share Posted March 8, 2024 (edited) But wait there's more... 2. Browser has same issue as Inspector with CbB projects. 3. Browser won't dock beneath MultiDock in new projects so can't create full width MultiDock view unless Browser is floating. 4. Entire Browser experience seems to have display issues - can't resize views and separation bar disappears when it's open. Edited March 8, 2024 by sjoens Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now