Max Arwood Posted September 6, 2023 Share Posted September 6, 2023 I haven’t had any new issues yet. I see I should do some Melodyne testing. Is there anything else besides just the everyday work that I should test? Link to comment Share on other sites More sharing options...
Milton Sica Posted September 6, 2023 Share Posted September 6, 2023 @Noel Borthwick I have worked on several projects. I get some crashes on AUTOSAVING, having to end the process in the process manager. In some situations I have observed a slower performance, mainly when using the Ozone 10 mastering assistant, sometimes making the sound crackle and even crashing the audio engine. Something that didn't happen in the previous version. Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted September 6, 2023 Share Posted September 6, 2023 On 9/3/2023 at 10:32 AM, Charles Nelson said: I really wish you'd disable the x86 hardware check. I can't install the update on my ARM64 based Windows 11 Pro laptop. The installer should allow for install there. If you're seeing an error can you provide a screenshot? Link to comment Share on other sites More sharing options...
Milton Sica Posted September 7, 2023 Share Posted September 7, 2023 (edited) I started to notice that after normalizing a set of Audio tracks, some of them are becoming desynchronized in the project and inserting noise at the end. I'm going to try doing the normalization track by track and see if the problem occurs or if it's just in the multitrack normalization process. Edited September 7, 2023 by Milton Sica Link to comment Share on other sites More sharing options...
Milton Sica Posted September 7, 2023 Share Posted September 7, 2023 16 minutes ago, Milton Sica said: I started to notice that after normalizing a set of Audio tracks, some of them are becoming desynchronized in the project and inserting noise at the end. I'm going to try doing the normalization track by track and see if the problem occurs or if it's just in the multitrack normalization process. CONFIRMED CONFIRMED! When normalizing multiple selected tracks, a random track is out of sync in the project. This does not happen when normalizing track by track. I did it several times and noticed that this always happens on the last track selected. Original track After normalization 1 Link to comment Share on other sites More sharing options...
Max Arwood Posted September 7, 2023 Share Posted September 7, 2023 They do not look like the same wave? Could you show more of the normalized one? Link to comment Share on other sites More sharing options...
Milton Sica Posted September 7, 2023 Share Posted September 7, 2023 (edited) 30 minutes ago, Max Arwood said: They do not look like the same wave? Could you show more of the normalized one? I only showed the end of the wave in both moments. It's pretty easy to play. 1 - Select multiple audio tracks. 2 - Command NORMALIZE. I have normalized at -3 DB. I can't say that this happened in this EA, because I didn't previously normalize my audios. When I started to do it in this version this appeared. It was normalizing 5/6 audio tracks. Edited September 7, 2023 by Milton Sica 1 Link to comment Share on other sites More sharing options...
Ron Leemans Posted September 8, 2023 Share Posted September 8, 2023 Has any one had problemes withe slowing down tempo? Cause I have never so far been able to slow music down or increase the tempo either way! having try many defferent way to experiment, So far nothing.......... Has it been rectified? 1 Link to comment Share on other sites More sharing options...
Czeslaw Posted September 8, 2023 Share Posted September 8, 2023 18 hours ago, Milton Sica said: I have normalized at -3 DB. I can't say that this happened in this EA, because I didn't previously normalize my audios. When I started to do it in this version this appeared. It was normalizing 5/6 audio tracks. I don't have this - all clips are normalized without artifacts. 2 Link to comment Share on other sites More sharing options...
Keni Posted September 8, 2023 Share Posted September 8, 2023 2 hours ago, Ron Leemans said: Has any one had problemes withe slowing down tempo? Cause I have never so far been able to slow music down or increase the tempo either way! having try many defferent way to experiment, So far nothing.......... Has it been rectified? I haven’t heard of this, but to alter tempo simply draw a curve on the tempo track Link to comment Share on other sites More sharing options...
Wagner Cappia Posted September 8, 2023 Share Posted September 8, 2023 Good morning! When I go to edit a drum set, using a folder, making cuts and repositioning all the tracks it is not working as before, I don't know if there has been any change in the way it works. What happens is that the split works, I drag each side only once and from then on the cursor does not allow selecting the parts and the fade between the parts does not occur. Can anyone comment if they also have this scenario? Link to comment Share on other sites More sharing options...
conklin Posted September 8, 2023 Share Posted September 8, 2023 23 hours ago, Milton Sica said: I only showed the end of the wave in both moments. It's pretty easy to play. 1 - Select multiple audio tracks. 2 - Command NORMALIZE. I have normalized at -3 DB. I can't say that this happened in this EA, because I didn't previously normalize my audios. When I started to do it in this version this appeared. It was normalizing 5/6 audio tracks. I tried this in 2022.11 and then with the new EA update and don't have this either. Is it still happening? Link to comment Share on other sites More sharing options...
Milton Sica Posted September 8, 2023 Share Posted September 8, 2023 1 minute ago, conklin said: I tried this in 2022.11 and then with the new EA update and don't have this either. Is it still happening? Yes. In all the projects that I have opened and tried. Link to comment Share on other sites More sharing options...
conklin Posted September 8, 2023 Share Posted September 8, 2023 2 minutes ago, Milton Sica said: Yes. In all the projects that I have opened and tried. Wasn't there a glitch a few updates back that involved something about different language installs? I don't remember the specifics but if it's any help I'm using the English install. Link to comment Share on other sites More sharing options...
msmcleod Posted September 8, 2023 Share Posted September 8, 2023 57 minutes ago, Milton Sica said: Yes. In all the projects that I have opened and tried. This is an old, old bug - we've tried several times to fix it, but haven't managed so far. There are a number of workarounds: 1. The easiest workaround is to "Bounce to Clip(s)" on each clip, prior to normalizing (this was something we tried to do programmatically as a fix, but had unexpected side effects when done "behind the scenes"). 2. Instead of using the built-in Normalize, use a 3rd party plugin and Process->Apply Effect. 3. Another thing that makes it less likely to happen is to have "Create one clip per file" checked in the Save As dialog. Note that this won't affect existing clips until you modify them. 1 Link to comment Share on other sites More sharing options...
Misha Posted September 8, 2023 Share Posted September 8, 2023 The install of last version was smooth... but there is in my opinion a serious issue (Sorry for double post if it was reported already) In earlier versions (last 5+ years) when a resource hungry VST was a culprit, you would get "Stopped Audio Engine" toaster and playback would stop. What happens now is it would play through without any warnings (No stopped Engine toaster) , with audio and performance meters unresponsive and no sound coming out. Restarted Cake, restarted computer. Issue still present. See video: Link to comment Share on other sites More sharing options...
IgoRr Posted September 9, 2023 Share Posted September 9, 2023 1 hour ago, Misha said: Restarted Cake, restarted computer. Issue still present. Greetings! A couple of my good friends had sound cards from Roland and MOTU for some time, and sometime they had similar problems after some random overload of Cakewalk. For them, this was caused by the fact that the audio card driver dropped, which had to be reinstalled after such cases. I am not an expert in driver issues, but some audio card manufacturers still have similar bugs until this day. First, check whether you have any system sound at all (play some music or video, open YouTube, etc.), and if you find any problems, reinstall the audio card driver. Personally, I was lucky, this never happened to any of the audio cards I used, but I remember such cases with my friends, maybe what I told you will help you. Link to comment Share on other sites More sharing options...
Misha Posted September 9, 2023 Share Posted September 9, 2023 (edited) Hey, thanks for trying. I never experienced this particular behavior (with several 4+ interfaces) in the past 5 years . This started with this last Cakewalk update. ------------------- Update Uninstalled Cakewalk. Installed Nov 2022 version - No issues. Reinstalled Early Access patch, everything is working fine now. Hopefully just an isolated glitch of some kind. Edited September 9, 2023 by Misha Link to comment Share on other sites More sharing options...
norfolkmastering Posted September 9, 2023 Share Posted September 9, 2023 On 9/4/2023 at 3:08 PM, azslow3 said: Originally reported Bus names related problem is fixed. Unfortunately (I guess almost the same, so some cache...) problem exists (for me) with Sends. MIX_PARAM_SEND_OUTPUT returns the same value even after the send destination is changed. At some point the values is updated (f.e. when a send for another strip is added), but it seems like cached over destination changes. It seems like I get topology update notification after changing the destination, but I can't get updated value... On 9/4/2023 at 4:15 PM, msmcleod said: This has now been fixed. Hi Mark Could we get an interim release to check the API fixes please? 1 Link to comment Share on other sites More sharing options...
Wagner Cappia Posted September 9, 2023 Share Posted September 9, 2023 On 9/8/2023 at 9:30 AM, Wagner Cappia said: Good morning! When I go to edit a drum set, using a folder, making cuts and repositioning all the tracks it is not working as before, I don't know if there has been any change in the way it works. What happens is that the split works, I drag each side only once and from then on the cursor does not allow selecting the parts and the fade between the parts does not occur. Can anyone comment if they also have this scenario? Nobody? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now