jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) Quote I have no idea what "C:\trigger_2_r112_win" contains. Slate Trigger 2 is a drums sample enhancement/ replacement tool. It uses a fair amount of CPU IIRC. I don't see any reason it shouldn't be consolidated with the others. Edited August 5, 2019 by jonathan boose Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) 1 hour ago, scook said: Uncheck the Re-scan options Also you should be running the scanner from preferences not from the Plug-in Manager. I unchecked the re-scan options. I tried scanning from preferences but it doesn't scan, it just creates multiple runtime errors and multiple logs. When I look at the logs, there are thousands of items that maybe a software engineer could understand. Edited August 5, 2019 by jonathan boose Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 I am sorry this 4 minutes ago, jonathan boose said: I tried scanning from preferences but it doesn't scan, it just creates logs. makes no sense. The logs are created by the vstscan.exe while performing a scan. The log details all the plug-ins the scanner tried to load and the results of the load. If the scanner ran to completion, it will indicate the results of the scan at the end of the log. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 59 minutes ago, scook said: I am sorry this makes no sense. The logs are created by the vstscan.exe while performing a scan. The log details all the plug-ins the scanner tried to load and the results of the load. If the scanner ran to completion, it will indicate the results of the scan at the end of the log. That is correct. I made an erroneous assumption. I had eliminated all scan paths except for C\program files\cakewalk\vstplugins There were only 17 plugins in that folder. Since it took a tiny fraction of a second to scan the plugins I didn't think it scanned. I'm used to it taking a minute, or a quarter of an hour, or never, for a scan to complete. I guess that if this has any relation to old fashioned t-shooting I should scan theses folders separately to zero in on the culprit? Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 The problem was caused by having "C:\Program Files" in the scan path. That makes the scanner go through everything in "C:\Program Files" loading every dll it finds. Set the scan path in preferences to look just like it does in the help with the addition of "C:\trigger_2_r112_win" if that contains a plug-in dll. Then run a scan. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) 13 hours ago, scook said: The problem was caused by having "C:\Program Files" in the scan path. That makes the scanner go through everything in "C:\Program Files" loading every dll it finds. Set the scan path in preferences to look just like it does in the help with the addition of "C:\trigger_2_r112_win" if that contains a plug-in dll. Then run a scan. In the example from that help link, it shows 2 file paths, both of which start with c:\program files Edited August 5, 2019 by jonathan boose Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 What's the purpose of scanning in a "sandbox"? I hat to look that up. Seems to mean: Quote A sandbox is a type of software testing environment that enables the isolated execution of software or programs for independent evaluation, monitoring or testing. In an implementation, a sandbox also may be known as a test server, development server or working directory Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 That is correct. These are the default entries that point to specific folders under C:\Program Files. C:\Program Files\Cakewalk\Vstplugins is the default path setup in CbB for VST2 plug-ins C:\Program Files\Common Files\VST3 is the path defined in the VST3 specification for 64bit VST3 plug-ins. The problem in this image is "C:\Program Files." This causes the scanner to dive down through every folder under this path trying to load every dll it finds. Most of the files are not VST2 or VST3 plug-ins and will cause all kinds of problems for the scanner. Aside from causing the scanner to load VST2/3 plug-in related files, it causes the scanner to scan all other folders in the scan path that are under "C:\Program Files" multiple times. This too can cause problems. If you want to get CbB usable again, start by changing the VST settings back to the default values in preferences. 1 Link to comment Share on other sites More sharing options...
msmcleod Posted August 5, 2019 Share Posted August 5, 2019 In addition to the default Cakewalk ones, the most common directories vst plugins are found in: C:\Program Files\VstPlugins C:\Program Files\Steinberg\VstPlugins 32 Bit plugins are likely to be found in: C:\Program Files (x86)\VstPlugins C:\Program Files (x86)\Steinberg\VstPlugins You may need to search around if there's ones missing, but these should catch 99% of all your plugins. Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 I suspect there may be plug-ins in other locations but would like to get the defaults set up first then deal with the other locations once CbB and the scanner function normally. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 Thanks, guys. I just had a little bit of trouble understanding. So I should exclude only the scan path that contains only "c:\program files" and see what happens? Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 Set up the scan path in preferences EXACTLY like the image shown in the help. Run a scan and we can deal with anything else later. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 4 hours ago, scook said: Set up the scan path in preferences EXACTLY like the image shown in the help. Run a scan and we can deal with anything else later. I did that. Sonitus plugins are showing up but none of the aftermarket plugins. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 4 hours ago, msmcleod said: In addition to the default Cakewalk ones, the most common directories vst plugins are found in: C:\Program Files\VstPlugins C:\Program Files\Steinberg\VstPlugins 32 Bit plugins are likely to be found in: C:\Program Files (x86)\VstPlugins C:\Program Files (x86)\Steinberg\VstPlugins You may need to search around if there's ones missing, but these should catch 99% of all your plugins. I don't have a Steinberg folder. I thought Steinberg was mostly Cubase? And I can probably live without 32 bit plugins. But so far only the Sonitus ones are showing up. Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 25 minutes ago, jonathan boose said: I did that. Sonitus plugins are showing up but none of the aftermarket plugins. The Sonitus plug-ins are DX format and have nothing to do with the VST scanner. The PC modules should be available. These do get scanned. All 64bit VST3 install by default into C:\Program Files\Common Files\VST3. They should be there. It is up to you to know where 3rd party VST2 plug-ins installed. A few possibilities have been mentioned above. By default, Cakewalk installs the few VST plug-ins bundled with it into C:\Program Files\Cakewalk\Vstplugins What does the scan log show now? Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) . Edited August 5, 2019 by jonathan boose Link to comment Share on other sites More sharing options...
scook Posted August 5, 2019 Share Posted August 5, 2019 If the log indicates the scanner is running to completion. It may be a good idea to run a Reset, the button next to the scan button in preferences. This will clear out the VST inventory in the registry and rebuild it from scratch. May want to create a log for the reset. After a successful reset, Waves support should be able to help get those plug-ins back. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 The reason the Waves plugins don't show up might be because I can't put them in the scan path because I can't download my licenses from the cloud, possibly due to absurdly slow DSL download speed. 2 mbps? You gotta be yanking my chain. Waves has these licenses download with 32 processes in parallel. I can't even go online to a forum like this one because the downloads are maxing out the modem. This goes on for a few hours, then it chokes and stops, waves t-shooting link appears, I click on it and get the usual instructions. I'll probably have to call Waves in the morning about that. Which leaves the other stuff I can't find: MJUC Soundtoys Sound Radix Nomad Factory as well as Garritan soft synths, a couple of other things. Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 58 minutes ago, scook said: If the log indicates the scanner is running to completion. It may be a good idea to run a Reset, the button next to the scan button in preferences. This will clear out the VST inventory in the registry and rebuild it from scratch. May want to create a log for the reset. After a successful reset, Waves support should be able to help get those plug-ins back. I don't know where to look on the log to tell whether it's running to completion. It's about a half mile long. "1280 DLLs found" Link to comment Share on other sites More sharing options...
jonathan boose Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) The date/ time stamp doesn't seem to jibe... Quote LogFile: C:\Users\jon\AppData\Roaming\Cakewalk\Logs\VstScan.log Thursday, 25 Jul 2019, 00:28:55 Opened Log File ----------------------------- Command line: /VSTRegPerUser/VSTRegKey:"Software\Cakewalk Music Software\Cakewalk\Cakewalk VST X64"/Background/SONARHWND:329290 Flag: VSTRegPerUser Flag: VSTRegKey:"Software\Cakewalk Music Software\Cakewalk\Cakewalk VST X64" Flag: Background Flag: SONARHWND:329290 -------- VST scan path's -------- c:\program files\cakewalk\shared utilities\internal c:\program files c:\program files\cakewalk\vstplugins c:\program files\common files\vst3 c:\trigger_2_r112_win Edited August 5, 2019 by jonathan boose Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now