Jesse Jost Posted December 21, 2018 Share Posted December 21, 2018 You can try asking the community for support with features and functionality. If you believe you’re having technical issues and would like additional assistance, please contact us at support@cakewalk.com. 2 3 Link to comment Share on other sites More sharing options...
Silvio Donato Posted January 18, 2019 Share Posted January 18, 2019 Dear Jesse, I have been trying to change may ID on Cakewalk. In fact, I did it. To confirm these changes, I should receive a message via e-mail. The problem is that I don't receive this e-mail message!!! And now I can't access my account on Cakewalk!!! Could you please help me? Link to comment Share on other sites More sharing options...
Mike B Posted January 18, 2019 Share Posted January 18, 2019 Hey Silvio, all set. Give it a shot, and shoot an email over to support@cakewalk.com if you have any trouble or need a password reset, etc. 1 Link to comment Share on other sites More sharing options...
Tom Hansen Posted February 9, 2019 Share Posted February 9, 2019 I haven't been working in music for a few years and have come back to discover that the cakewalk account is gone. So how do I get access to the existing SONAR products that I own, including the latest Sonar Producer X3e patch. Thanks. Link to comment Share on other sites More sharing options...
Jesse Jost Posted February 9, 2019 Author Share Posted February 9, 2019 Hi @kenschr36. Your account should still be intact in order to access any purchased software. Try signing into the Cakewalk account portal. PM me if you have trouble getting in, and we'll get you sorted. Link to comment Share on other sites More sharing options...
scook Posted February 9, 2019 Share Posted February 9, 2019 The X3e patch is available in the old Cakewalk Knowledge Base. Link to comment Share on other sites More sharing options...
jonathan boose Posted February 14, 2019 Share Posted February 14, 2019 Is there some advantage to using X3e? I just switched from X3 PE to Bandlab and so far, the differences seem few and not very important. Link to comment Share on other sites More sharing options...
scook Posted February 14, 2019 Share Posted February 14, 2019 The two programs look similar. That familiarity is a good thing when trying to learn a new version. That said, there have been quite a few bug fixes, enhancements and new features in the years since X3. Whether they are meaningful to you depends on your workflow and if you choose to take advantage of the changes since X3. Here are the SONAR and CbB update notifications. For the most part, it is possible to ignore all the changes since X3 and use CbB just like the 6 year old SONAR X3. Link to comment Share on other sites More sharing options...
Doug Garceau Posted February 21, 2019 Share Posted February 21, 2019 Hi Jesse, my hard drive crashed (not due to cakewalk) and I downloaded bandlab assistant but can't get cakewalk. I got cakewalk theme and melodyne but when I try to run cakewalk installer, it says file corrupted download again. I've tried 10 times. Any advise, is it because I had it already? Thanks Link to comment Share on other sites More sharing options...
Doug Garceau Posted February 21, 2019 Share Posted February 21, 2019 By the time I typed the last word, the installer popped up and worked. That was fast, was that you? Fantastic! 1 Link to comment Share on other sites More sharing options...
Jesse Jost Posted March 4, 2019 Author Share Posted March 4, 2019 @Doug Garceau lol we do what we can! 1 1 Link to comment Share on other sites More sharing options...
Blane Cox Posted June 28, 2019 Share Posted June 28, 2019 I use a Snowball USB mic. The vocal track is distorted. There's no clipping, in fact the input volume is low. Recommendations? hblanecox@gmail.com Link to comment Share on other sites More sharing options...
Jim Fogle Posted June 29, 2019 Share Posted June 29, 2019 @bliane cox, You may want to remove your email address from your post. A lot of automated robots collect email addresses for SPAM distributors. The Blue Snowball has been available for awhile and uses the native, Windows class compliant USB driver. All that means is it works for a lot of people but isn't working for you. How does the audio sound if you use the snowball outside of Cakewalk? Have you tried using it with Audacity, https://www.audacityteam.org/, or another free to download recording program? How does the microphone sound if you use it to speak with someone over the internet? How about if you go into the Windows Control Panel and test the microphone under the record tab, how much does the VU meter move? What I'm trying to do is think of tests that can help separate the problem into either (1) there's a physical problem with the hardware, (2) a problem with how Windows is set up or (3) a problem with how Cakewalk is set up. Link to comment Share on other sites More sharing options...
frodo Posted April 6, 2020 Share Posted April 6, 2020 Buenas tengo un problema. Cuando guardo un proyecto me dice que no tengo espacio en el disco y tengo espacio de sobra ¿ por qué? Link to comment Share on other sites More sharing options...
reginaldStjohn Posted April 6, 2020 Share Posted April 6, 2020 recibiras mas respuestas si pregunta en la siguente forum https://discuss.cakewalk.com/index.php?/forum/2-cakewalk-by-bandlab/ Otro que este, empieza Cakewalk como administador para ver si este tiene un cambio par ti. Link to comment Share on other sites More sharing options...
andrea Posted April 15, 2020 Share Posted April 15, 2020 when I open cakewalk a red pop up of activation required appears. It advises me that: Saving is disabled until you activate Cakewalk via Bandlab assistant. I found no info on Bandlab on how to reactivate this foundamental option. Does anybody know how to do that? Thanks Link to comment Share on other sites More sharing options...
reginaldStjohn Posted April 15, 2020 Share Posted April 15, 2020 (edited) There are several other threads similar to yours. Edited April 15, 2020 by reginaldStjohn Link to comment Share on other sites More sharing options...
Ron Benvenisti Posted April 27, 2020 Share Posted April 27, 2020 (edited) Transport suddenly had slow or no response. It can take several seconds to repond to transport controls (via keyboard or control surfaces. In fact this is true of any function such as mute, solo, etc. I have not changed anything on the machine. Tried reloading, restarting to no avail. Freezing VST tracks and deleting the VSTs (Groove Agent and DW Drum enhancer) However, it seems to day, I loaded a previous version of the project that had lesser tracks, which always worked. Closed that, loaded thelater version wthat has more tracks and it seems okay! Any ideas about why this can happen. I am running 8.1 Pro, Intel i7-4700 MQ, All drives are SSD. 32GB Ram, all extraneous services disabled. I closed Cakewalk and later reopened and the same behavior with responsiveness occurred. It seems that the further into the playing project it gets so bad as to be practically unusable. Thanks in advance. I tried increasing playback buffers and that seems to work. Keeping fingers crossed. Oh boy started happening again. Edited April 27, 2020 by Ron Benvenisti Problem is recurring Link to comment Share on other sites More sharing options...
msmcleod Posted May 3, 2020 Share Posted May 3, 2020 On 4/27/2020 at 2:58 PM, Ron Benvenisti said: Transport suddenly had slow or no response. It can take several seconds to repond to transport controls (via keyboard or control surfaces. In fact this is true of any function such as mute, solo, etc. I have not changed anything on the machine. Tried reloading, restarting to no avail. Freezing VST tracks and deleting the VSTs (Groove Agent and DW Drum enhancer) However, it seems to day, I loaded a previous version of the project that had lesser tracks, which always worked. Closed that, loaded thelater version wthat has more tracks and it seems okay! Any ideas about why this can happen. I am running 8.1 Pro, Intel i7-4700 MQ, All drives are SSD. 32GB Ram, all extraneous services disabled. I closed Cakewalk and later reopened and the same behavior with responsiveness occurred. It seems that the further into the playing project it gets so bad as to be practically unusable. Thanks in advance. I tried increasing playback buffers and that seems to work. Keeping fingers crossed. Oh boy started happening again. The only time I've experienced this is when using a laptop with the onboard Realtek sound device in ASIO mode. Switching to WASAPI mode in Preferences->Audio->Playback & Recording fixed for me. Link to comment Share on other sites More sharing options...
Ron Benvenisti Posted May 3, 2020 Share Posted May 3, 2020 (edited) Thanks for the reply. I do have a Realtek card but I disabled it immediately (with a lot of other stuff) because I use ASIO ADAT to communicate with multiple systems in many channels and timing in my studio So WASAPI won't do it for me. I could uninstall the Realtek driver, but I'm afraid everytime I reboot, Windows will find it and automatically reinstall the driver and I have to go uninstall it again!!!!! I'm not even sure that will fix things. I seemed to have narrowed it down to the Console window. Any changes to it's size, after the project loads and it is undocked, kicks it in. This only started happening with the latest release and projects created with it. I've seen no problems with projects created with earlier releases. Now I know this may seem like a strange theory but I have proven it over and over again. I think their is a video related bug that slipped into the console view with the latest release. This is when it first happened. It is especially nefarious with multi monitors. I have always had a track view on one monitor and a console view on another with nary a problem. I tried both the built in GPU (Intel HD 600) and the GeForce GT-770M with no difference. As of now I am thinking that if I rollback a release, things should go back to normal, I hope, But as you know, I can't do that through the Assistant, and legacy releases are just not available. I kind of wish I downloaded earlier releases standalone and not via Bandlab Assistant which apparently deletes them from the download folder with no option to roll back. At least then I would have a back-up. I could go to a back-up I have, weekly, but I would not know which files to restore without screwing things up. Would restoring just the Cakewalk Core files I mention here, in file folder work? The Re the only files seem to be changed recently: Cakewalk.exe (4/24/2020) TTSImage,dll (4/24/2020) TTSRes.dll (4/24/2020) The latest file before that is libsndfile-1.dll (4/2/2020) Thanks for your help, Ron Edited May 3, 2020 by Ron Benvenisti Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now