schnibbelkram Posted July 5, 2019 Share Posted July 5, 2019 Hey folks, i`m trying to route/send notes from a midi channel to a vst (Kerovee) for autotuning vocals . Couldn`t find any Info how to do that. Does Cakewalk have it`s own autotune effect by the way? Regards Link to comment Share on other sites More sharing options...
0 scook Posted July 5, 2019 Share Posted July 5, 2019 For FX plug-ins that listen for MIDI data make sure "Enable MIDI Input" is checked on the plug-in's VST2/VST3 drop down This will cause the plug-in to be listed in MIDI track output drop downs. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 5, 2019 Author Share Posted July 5, 2019 (edited) ...and it seems that it only works with 64bit vst`s ? Edited July 5, 2019 by schnibbelkram Link to comment Share on other sites More sharing options...
0 scook Posted July 5, 2019 Share Posted July 5, 2019 When loading a 32bit plug-in in Bitbridge, the standard header is in a separate window. Normally the header window is not opened. To open the header window, hold down the ALT key when dropping the plug-in into the FX Rack from the browser or opening the plug-in UI. Usually the header window opens behind the plug-in UI. Link to comment Share on other sites More sharing options...
0 msmcleod Posted July 5, 2019 Share Posted July 5, 2019 If you want a free 64 bit auto-tune plugin, try the Melda Productions free bundle: https://www.meldaproduction.com/MFreeFXBundle which includes MAutoPitch: https://www.meldaproduction.com/MAutoPitch (amongst a bunch of other pretty awesome plugins) Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 20, 2019 Author Share Posted July 20, 2019 Ok, so i downloaded a new Version of Gsnap, but the results are not a 100% sadisfying to me. Downloading the MFreeFXBundle right now. @skook: I got it to work, but i haven`t found out how to route the midi track to several vocal/audio tracks with the autotune vst/effect. I can only send it to one track. Do i have to create a own midi track for each voice track? I guess there is a better way, right? Link to comment Share on other sites More sharing options...
0 scook Posted July 20, 2019 Share Posted July 20, 2019 There are a couple of ways to distribute the same MIDI data to multiple targets. The conventional method uses cloned the tracks and linked MIDI clips. Each MIDI track may send its data to a different output. Since the clips are linked, changing one clip affects them all. Of course, clips may be unlinked at any time to allow changes to clips in each MIDI track. Another method uses a virtual MIDI cable (ex. LoopBe1). A MIDI track containing the data is routed to a virtual MIDI cable. MIDI tracks are created with their inputs set to the virtual MIDI cable and their outputs set to as needed. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 20, 2019 Author Share Posted July 20, 2019 Well, its a pretty simple song i made with children, and the melody for all singers is the same. What i want to do is have ONE Midi clip with the midi data of the melody, from where i can send it to every (autotune fx ) vocal track for the different singers/takes . Is that possible. As far as is understood your last post, there has to be a midi track for each audio track ,at least with the first method ? Link to comment Share on other sites More sharing options...
0 scook Posted July 20, 2019 Share Posted July 20, 2019 A linked clip is effectively ONE MIDI clip and this is the traditional way Cakewalk provides for driving multiple targets with the same data. Actually both methods use a MIDI track for each target (in this case multiple instances of a VST FX plug-in). A MIDI track output drop down is restricted to one output selection. only. The only difference in the two methods described above is how MIDI tracks get their data: one uses linked clips, the other uses a virtual MIDI cable. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 21, 2019 Author Share Posted July 21, 2019 Ok, tried to figure this out via the documentation, but i just don`t understand it : "Click the Track view Clips menu and choose Bounce to Clip(s)" Can somebody make a screenshot for me about this, cause i can`t find "Bounce to Clip(s)" in the Track view. Maybe i`m blind, maybe the german translation of the programm is bad in this case, or my english is :-/ Link to comment Share on other sites More sharing options...
0 scook Posted July 21, 2019 Share Posted July 21, 2019 Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 (edited) I marked 2 clips in seperate tracks, did as seen in the screenshot - nothing happend. Edited July 22, 2019 by schnibbelkram Link to comment Share on other sites More sharing options...
0 scook Posted July 22, 2019 Share Posted July 22, 2019 What did you expect? Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/20/2019 at 4:56 PM, schnibbelkram said: What i want to do is have ONE Midi clip with the midi data of the melody, from where i can send it to every (autotune fx ) vocal track for the different singers/takes Link to comment Share on other sites More sharing options...
0 scook Posted July 22, 2019 Share Posted July 22, 2019 Bounce to clips will not merge clips on different tracks. Bouncing clips on multiple tracks renders the clips but leaves them where they are. So, in the case of MIDI clips, it may appear like nothing happened. To have multiple instances of the same clip act like ONE clip (whether on the same or different tracks) use Paste Special with "Link to Original Clip(s)" enabled when copying the clip. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 (edited) I marked the Clip i want to copy/paste, but when i go to paste special it is not "activated" , the letters are not black but grey and i can`t use it. EDIT: Nevermind, i forgot to copy the clip first... I`M CONFUSED !!! ? Edited July 22, 2019 by schnibbelkram Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 So, i have cloned the midi clip, 2 midi clips in 1 track now. Chose bounce again. Still can only send it to 1 fx at a time. Link to comment Share on other sites More sharing options...
0 scook Posted July 22, 2019 Share Posted July 22, 2019 Clips do not have any control over where their data goes, the MIDI track output setting controls where the clip data is sent. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 clear so far, but i can only check one fx at the track output, not several fx as i want to. Link to comment Share on other sites More sharing options...
0 scook Posted July 22, 2019 Share Posted July 22, 2019 Already covered that ground earlier On 7/20/2019 at 2:26 PM, scook said: There are a couple of ways to distribute the same MIDI data to multiple targets. The conventional method uses cloned the tracks and linked MIDI clips. Each MIDI track may send its data to a different output. Since the clips are linked, changing one clip affects them all. Of course, clips may be unlinked at any time to allow changes to clips in each MIDI track. Another method uses a virtual MIDI cable (ex. LoopBe1). A MIDI track containing the data is routed to a virtual MIDI cable. MIDI tracks are created with their inputs set to the virtual MIDI cable and their outputs set to as needed. Multiple targets, in this case FX plug-ins, mean multiple MIDI tracks, one for each instance the plug-in. The for these tracks may be linked clips or a "master track" connected via a virtual MIDI cable. Link to comment Share on other sites More sharing options...
0 schnibbelkram Posted July 22, 2019 Author Share Posted July 22, 2019 3 minutes ago, scook said: Multiple targets, in this case FX plug-ins, mean multiple MIDI tracks, one for each instance the plug-in. So , actually there is no way around it ? Link to comment Share on other sites More sharing options...
Question
schnibbelkram
Hey folks,
i`m trying to route/send notes from a midi channel to a vst (Kerovee) for autotuning vocals . Couldn`t find any Info how to do that. Does Cakewalk have it`s own autotune effect by the way?
Regards
Link to comment
Share on other sites
23 answers to this question
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now