micv Posted January 11, 2021 Share Posted January 11, 2021 This is the read out that has two numbers and is confusing to me when the entire envelope is being selected (all nodes). The one on the left looks to me is the value of where the cursor is but not always! the number one the right, I cannot see any consistent pattern, I'd expect that this to be the amount of change but it's not! Link to comment Share on other sites More sharing options...
reginaldStjohn Posted January 12, 2021 Share Posted January 12, 2021 My experience is that the two numbers shown are supposed to be represent the current value and the difference from the previous value. If you have multiple selected then I don't know what the current value would show but I would think the other number should be the changed amount. Maybe post a screen shot or two to show what you are seeing. Link to comment Share on other sites More sharing options...
micv Posted January 12, 2021 Author Share Posted January 12, 2021 I will need to figure out how to do screenshot! For example I move the entire envelope (all nodes) down by .5db but the second number shows +3.5; then I move the envelope up by .5db the second number shows +4.5. Doesn't make any sense. Link to comment Share on other sites More sharing options...
Xoo Posted January 12, 2021 Share Posted January 12, 2021 4 - 0.5 = 3.5dB; 4 + 0.5 = 4.5dB. Seems to make sense to me. Link to comment Share on other sites More sharing options...
micv Posted January 13, 2021 Author Share Posted January 13, 2021 16 hours ago, Kevin Perry said: 4 - 0.5 = 3.5dB; 4 + 0.5 = 4.5dB. Seems to make sense to me. where do the 4 come from? the nodes has different values throughout and in my test there is no segment that is +4db. In practice I just want to move the entire envelop by a certain value, like .5 db, and I can't tell how much I had moved by looking at the numbers. Link to comment Share on other sites More sharing options...
micv Posted January 15, 2021 Author Share Posted January 15, 2021 anyone? Link to comment Share on other sites More sharing options...
Bristol_Jonesey Posted January 15, 2021 Share Posted January 15, 2021 This sort of thing can easily be done using offset mode. Switch on Offset Mode Raise TRACK FADER by 0.5dB Switch off offset Mode Link to comment Share on other sites More sharing options...
reginaldStjohn Posted January 16, 2021 Share Posted January 16, 2021 4 hours ago, micv said: anyone? So I tried to reproduce your issue and was unable to do it. Maybe yours is more complicated an so it is not as repeatable. Here is what I see. I made an envelope lane for volume in a track and made sure the value was 0.0dB Then I created 4 nodes and raised the inner nodes up to +3db. 1st number tells me what value I am on the the second the offset from the previous possition. I also closed the automation lane and just looked at the values in the track view. They seemed to be the same I moved one of the nodes to 6db. Then I moved bot the 3dB and 6dB nodes together so the 3dB one was back at 0dB. So, at least in this case everything seems to be working. If you are seeing something different maybe get a hold of cakewalk support and send them your project so they can look at it. Link to comment Share on other sites More sharing options...
micv Posted January 17, 2021 Author Share Posted January 17, 2021 @reginaldStjohn. Thanks for trying this out. When you're moving only one node or a segment between two nodes it will work as expected. The issue I observed is when you have more than one 'segment' and all nodes selected. In your example try to select the entire envelope, all the nodes selected, you'll see what I mean. In addition to the non-sense readout, you should see that for some reason the very last node will be un-selected and not move, instead another node will be created on top of the last note. Link to comment Share on other sites More sharing options...
micv Posted January 17, 2021 Author Share Posted January 17, 2021 On 1/15/2021 at 6:53 PM, Bristol_Jonesey said: This sort of thing can easily be done using offset mode. Switch on Offset Mode Raise TRACK FADER by 0.5dB Switch off offset Mode A while back I got so confused with offset mode that I decided not to use it. As I recall when you switch back to normal mode, the fader will ride with the envelop and the offset will be applied behind the scene. Cool but after awhile you might forget that you have some offset somewhere. Would be good if they also show the offset number next to the fader number. Link to comment Share on other sites More sharing options...
Bristol_Jonesey Posted January 23, 2021 Share Posted January 23, 2021 On 1/17/2021 at 11:38 PM, micv said: A while back I got so confused with offset mode that I decided not to use it. As I recall when you switch back to normal mode, the fader will ride with the envelop and the offset will be applied behind the scene. Cool but after awhile you might forget that you have some offset somewhere. Would be good if they also show the offset number next to the fader number. If you engage offset mode at some point in the future, all non-adjusted faders will jump to 0dB whilst the ones you have adjusted will show it's new value View it in Console View to see what's going on Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now