AB99 Posted September 8, 2020 Share Posted September 8, 2020 (edited) So I have to admit that I love buying equipment. I noticed that my computer I have been using for 4 years has only 16 gb of ram in it. I am not sure why. But the motherboard allows 64gb, so I am going for it. Will I realize any improvement? I also upgrading to two m.2 SSDS because I just found out that the motherboard (GIGABYTE G1 Gaming GA-Z170X-Gaming 7 ) has two M.2 slots that I just never saw! So, it will be interesting to see any improvement enhancements!!! Edited September 8, 2020 by Alan Bachman 1 1 Link to comment Share on other sites More sharing options...
mdiemer Posted September 8, 2020 Share Posted September 8, 2020 (edited) you will definitely see improvements. You can't have too much memory. Especially for orchestral music, we are fast approaching the point where people will be saying you need 64GB at minimum. I'm sure there are people saying that now. You will see improvements in speed, and you will be able to set your buffers very low, which will improve latency considerably. And pops and crackles should be a thing of the past when I had a computer built for me, I too only had 16GB. Eventually I felt the need for more, so I upgraded to 32. But that is the limit for my mobo, so hopefully it will be enough. now, if we could just add more memory to our brains that easily... Edited September 8, 2020 by mdiemer Link to comment Share on other sites More sharing options...
bitflipper Posted September 8, 2020 Share Posted September 8, 2020 Don't get your hopes too high expecting a miracle, Alan. Yes, if you're doing large orchestral projects with deeply-sampled libraries (like Micheal does), then it could make a big difference, especially if you optimize your VIs to make use of the extra RAM. But don't expect projects to load faster or playback to be smoother. You still have to read the data, which is still going to be throttled by disk latency, the I/O bus and the speed of the memory itself. It's true that "you can never have too much RAM", insofar as there is no downside other than the money you've spent on it. However, there's no benefit if it never gets used. I have only 16GB here, and have yet to run out of physical memory. YMMV, of course. Link to comment Share on other sites More sharing options...
Rico Belled Posted September 8, 2020 Share Posted September 8, 2020 If I had $1 for every person I know (mostly Mac users of course!) that bought more RAM to "speed up" his computer, only to find out it made ZERO difference, I'd have like 2 or 3 hundred bucks! If I had $1 for everyone that recommended to someone else to buy more RAM to speed up his or her computer I'd have enough to buy a 2010 Prius. I've done seriously big projects for years, with over 100 tracks, Addictive Drums, GPO, Kontakt etc. etc. I don't use a TON of big sample libraries, and as explained, if you DO a lot you're in a different situation, but I've NEVER seen a project on my system use more than 4 GB. I upgraded from 8GB to 16GB of RAM at some point and saw ZERO difference in DAW use. Some games on the other hand did use it so it wasn't a waste of time. Bottom line is this: buying more RAM without first seeing how much you're ACTUALLY using is kind of silly. And the important metric here is the amount CAKEWALK specifically is using in Task Manager, NOT the total RAM used by the system which is not exactly relevant. If you're doing Vienna Symphonic library type stuff, or to RAM video rendering previews, you could use 64GB, but for almost everyone else 8GB is more than likely enough. R 1 Link to comment Share on other sites More sharing options...
MediaGary Posted September 8, 2020 Share Posted September 8, 2020 Yes, I heartily recommend that you watch the Task Manager to see how your RAM usage goes. While I was in "go-big-or-go-home" mode, I built my new AMD machine with 128GB RAM because I have ambitions of running my Vienna Ensemble Pro and some other very impressive libraries that I've purchased. Along with that, I have the intent to run AudioGridder in the AMD machine as a VST/VSTi server to my venerable 2010 Mac Pro. So far, the high water mark for my RAM usage has been when I had DaVinci Resolve and CbB open concurrently. Even that was a total of less than 12GB. The biggest usage of the RAM is the 24GB that it's using for PrimoCache. I gained experience with PrimoCache running in the Win10 partition of the Mac and was very pleased. Even though the boot drive in the new machine is a Gen4 NVMe, and my Picture Cache for CbB lives there, on a whim I ran the Primo Cache trial and was amazed at this one thing: I opened a CbB project that had not been touched since Feb 2020, so the Picture Cache would need to be completely regenerated. The project is 34 mono tracks, 2 hours long. Because of PrimoCache, the Picture Cache was generated within 15 seconds. It was truly impressive to see all those CPU cores lit up, and to get of sense of what had to be some high-rate data movement. You can't directly observe the data rate of disk I/O in PrimoCache, but a benchmark like ATTO shows peak speeds over 22GBytes/sec. That's not a typo...it's 22,000MBytes/sec writing, and around 17GBytes/sec peak reading. That's the benefit of the 'L1' RAM cache in PrimoCache. The latency of RAM is about 20-50 nanoseconds, so it's 1/1000-th the wait time of even an NVMe which has latency numbers in the 20-100 microsecond range. The other lovely benefit of the PrimoCache implementation is that the 'L2' cache essentially makes the 'L1' RAM cache non-volatile, because it replicates the L1 RAM cache during operation, and restores it during reboot. I have 200GB of L2 cache apportioned on a Gen3 NVMe. Unfortunately, that's the *only* circus trick that makes all that RAM worthwhile if I'm not yet building an orchestral soundtrack for the next blockbuster. (Will we ever go to the movies again?) So, back to my original premise, spend some time watching the telemetry of the tools within Win10 so you don't over-invest. I think half of the RAM I have may wind up in the new machine that I will soon build for my son. Link to comment Share on other sites More sharing options...
AB99 Posted September 8, 2020 Author Share Posted September 8, 2020 I should have mentioned that I use a lot of sample libraries, including various Vienna libraries, and I was experiencing Ram issues. Thank you all! My expectations are lowered! Link to comment Share on other sites More sharing options...
Rico Belled Posted September 9, 2020 Share Posted September 9, 2020 2 hours ago, Alan Bachman said: I should have mentioned that I use a lot of sample libraries, including various Vienna libraries, and I was experiencing Ram issues. Thank you all! My expectations are lowered! Well, then you DO fit the profile where a LARGE improvement could be noticed! Please let us know what you find out! R Link to comment Share on other sites More sharing options...
AB99 Posted September 9, 2020 Author Share Posted September 9, 2020 Thank you, Rico. There has been like a hurricane here (super high winds) and shipping has slowed. So hopefully I will get the ram soon and let you and others know. Best, Alan Link to comment Share on other sites More sharing options...
Andres Medina Posted September 11, 2020 Share Posted September 11, 2020 On 9/8/2020 at 6:58 PM, Alan Bachman said: I should have mentioned that I use a lot of sample libraries, including various Vienna libraries, and I was experiencing Ram issues. Thank you all! My expectations are lowered! I have 32 Gb RAM. Some plugins, like Omnisphere, use a LOT of RAM. Others, not so much, so it depends on your particular setup. If your setup is full of VST's, the extra RAM is a blessing. Anyway, when I upgraded to 32 Gb, I really experience a big leap in terms of speed and reliability. Now I can load a LOT of VST's without struggle. Link to comment Share on other sites More sharing options...
AB99 Posted September 11, 2020 Author Share Posted September 11, 2020 Thank you, Andres. I was going to upgrade from 16gb to 32gb and it probably would have been fine. But pricewise, the 64gb just happened to work out. I always wanted to try Omnisphere, by the way. Link to comment Share on other sites More sharing options...
S Wats Posted September 11, 2020 Share Posted September 11, 2020 I only recently upgraded my i5 Win 10 system from 4gb to 8gb. I use it for heavyweight DAW, gaming and photography use. I have never experienced any memory problems whatsoever. It is extremely unlikely you will need any more than 8gb in my experience. A lot of the expectation for more is just from aggressive sales tactics from big PC companies trying to flog you stuff that you really dont need. Link to comment Share on other sites More sharing options...
Rico Belled Posted September 11, 2020 Share Posted September 11, 2020 19 minutes ago, shaun watson said: I only recently upgraded my i5 Win 10 system from 4gb to 8gb. I use it for heavyweight DAW, gaming and photography use. I have never experienced any memory problems whatsoever. It is extremely unlikely you will need any more than 8gb in my experience. A lot of the expectation for more is just from aggressive sales tactics from big PC companies trying to flog you stuff that you really dont need. Now I have to take the other side: it's not "extremely unlikely" if, as stated the OP does, one uses large sample libraries. It's almost CERTAIN that more than 8GB will make a big difference. R Link to comment Share on other sites More sharing options...
Hill62 Posted September 11, 2020 Share Posted September 11, 2020 Make sure to reference your motherboard documentation to determine what sacrifices you may have to make to use those M.2 slots. There are only so many lanes on the PCIe bus and they share with graphics, SATA and other hardware resources. So keep that in mind and plan accordingly. my 2 cents. Link to comment Share on other sites More sharing options...
Bristol_Jonesey Posted September 11, 2020 Share Posted September 11, 2020 (edited) I run EWQLSO and my typical template is 135 tracks It's never used more than 9Gb of RAM in my 32Gb system The biggest improvement in speed was moving all the sample libraries over to a 1Tb SSD Load time dropped from about 9 minutes to 90 seconds Edited September 11, 2020 by Bristol_Jonesey Link to comment Share on other sites More sharing options...
AB99 Posted September 12, 2020 Author Share Posted September 12, 2020 7 hours ago, Hill62 said: Make sure to reference your motherboard documentation to determine what sacrifices you may have to make to use those M.2 slots. There are only so many lanes on the PCIe bus and they share with graphics, SATA and other hardware resources. So keep that in mind and plan accordingly. my 2 cents. You are correct. In my situation with A Gigabyte G1 Gaming 7 - I lost some sata ports. It was worth the trade off though. Link to comment Share on other sites More sharing options...
Jim Roseberry Posted September 15, 2020 Share Posted September 15, 2020 As has been mentioned, use Task Manager to have a look at the amount of RAM used by your largest projects. You need enough RAM to avoid hitting the VM Swapfile (in lieu of enough physical RAM)... as that'll kill performance. If your largest project uses 12GB RAM (and you've currently got 32GB)... bumping up to 64GB will have zero effect on performance. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now