George DaNova Posted September 7, 2020 Share Posted September 7, 2020 Just connected an audio interface and everything fine, but I wanted to try to output from the computer's sound card (headphone output). Why don't I see that available in the Preferences: Audio devices - Output drivers? Even the Help page shows that as Realtek. Thx. Link to comment Share on other sites More sharing options...
reginaldStjohn Posted September 7, 2020 Share Posted September 7, 2020 You have to make sure that the driver mode you select is compatible with your sound card. Usually the built in Realtek cards needs something other than ASIO. Link to comment Share on other sites More sharing options...
Colin Nicholls Posted September 7, 2020 Share Posted September 7, 2020 What do you see in your Device Manager under "Audio Inputs and outputs" and "Sound, video and game controllers"? Could the internal card be disabled in Device Manager? If it is enabled, it should show up under Cakewalk > Preferences > Audio > Devices. Do you see anything other than the "audio interface" you've connected? What is the brand/model of the audio interfacce? What driver type are you using? ASIO ? Link to comment Share on other sites More sharing options...
George DaNova Posted September 7, 2020 Author Share Posted September 7, 2020 Thanks for the quick reply. Right... I was using ASIO thinking that was the "standard" for the Komplete Audio 1. But if I select WASAPI both the internal sound card and the audio interface are shown. ? Link to comment Share on other sites More sharing options...
lapasoa Posted September 8, 2020 Share Posted September 8, 2020 20 hours ago, George DaNova said: Just connected an audio interface and everything fine, but I wanted to try to output from the computer's sound card (headphone output). It's not clear what you mean. If you have an audio interface connected to a computer, the sound is coming from your audio interface, not from your computer's soud card. Link to comment Share on other sites More sharing options...
gustabo Posted September 8, 2020 Share Posted September 8, 2020 Because Realtek is not a formidable audio interface. Link to comment Share on other sites More sharing options...
Terry Kelley Posted September 10, 2020 Share Posted September 10, 2020 Device Mode pull down will only show those device that work with that mode. Link to comment Share on other sites More sharing options...
George DaNova Posted November 12, 2020 Author Share Posted November 12, 2020 Just to wrap this up and reply to @lamposa, sometimes I work without an audio interface, and just use a simple MIDI interface and/or a USB controller with Cakewalk. In those cases I set my Driver Mode to WASAPI and the master output to my computer sound card. This works fine, as the digital to analog conversion for monitoring is not as critical as the analog to digital conversion that the audio interface provides. So I'm just using the computer's headphone output to monitor, either with headphones or by patching that up to speakers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now