Brian Sheen Posted February 17, 2019 Share Posted February 17, 2019 I've been trying to open some older projects(some created with X3, some with platinum) and I'm getting this pop sound at the end of it loading. I believe the pop is an indicator, not the problem. The issue is the audio tracks can not be heard. The meters show activity, but sound. All midi tracks work properly. I can go into the project folder and play the wav files in Media Player. I've tried to copy the files into the project, but still no sound. Link to comment Share on other sites More sharing options...
Brian Sheen Posted February 17, 2019 Author Share Posted February 17, 2019 Ok. So I just routed the output to of one of the audio tracks to the master bus instead of the "Clean Guitar" buss and the audio can be heard. All of the Pro Channel Global On/Off button are in the "ON" position for every track and every buss. However if I route the track to the buss it was originally going to and turn the global button to off, the audio returns. When its on there is no sound. Link to comment Share on other sites More sharing options...
John Vere Posted February 18, 2019 Share Posted February 18, 2019 Obviously there's a missing Pro Channel module or one that has it's output shut off. Best to start fresh and create a new buss and re populate the effects. But first look closely at the pro channel modules. Link to comment Share on other sites More sharing options...
Brian Sheen Posted February 19, 2019 Author Share Posted February 19, 2019 I'm not sure where this leads me, but I deleted several of the busses, including the master buss. I inserted some new busses including a new master buss and now when clicking on anything all I hear is a pop sound. From the transport to the mixer, it doesn't matter. Theres alot I don't understand what is going on, but this is not the only project its happening on. Other "older" pre platinum projects its occuring as well. Link to comment Share on other sites More sharing options...
scook Posted February 19, 2019 Share Posted February 19, 2019 Try toggling the 64bit Double Precision Engine in preferences If that does not make a difference, bypass all plug-ins either with the FX button in the mix module or the shortcut "E" If the problem goes away, it is related to one or more plug-ins. To narrow it down, enable all plug-ins using the FX button or "E" and bypass individual FX Racks. Link to comment Share on other sites More sharing options...
reginaldStjohn Posted February 19, 2019 Share Posted February 19, 2019 I have had problems like this in the Pro Channel, particularly with the console emulators but it could be any of them. Do as "scook" suggests and turn them off one by one until sound starts again. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now