G Randy Brown Posted January 30, 2020 Share Posted January 30, 2020 I switched out my Presonus audiobox with the Scarlett and it states I have no audio devices. Win 10 recognizes the Scarlett but nothing shows in prefs under devices...when I unplug the Scarlett it tells me it was disconnected. Can someone tell me how to get CW to recognize it? Thanks very much, Randy Link to comment Share on other sites More sharing options...
tecknot Posted January 31, 2020 Share Posted January 31, 2020 uh, have you installed the driver(s)? Had to ask. Kind regards, tecknot 1 Link to comment Share on other sites More sharing options...
JonD Posted January 31, 2020 Share Posted January 31, 2020 16 hours ago, tecknot said: uh, have you installed the driver(s)? Had to ask. What he said... In short, did you do the following? 1) Download the latest 2i2 driver package from Focusrite. 2) With the 2i2 NOT connected to your PC -- install the software. 3) Reboot your system. 4) Connect the 2i2 via USB. Allow a moment for 2i2 to load driver. 5) Start up CbBL. Link to comment Share on other sites More sharing options...
Billy86 Posted January 31, 2020 Share Posted January 31, 2020 I'm a Focusrite guy, and what's suggested is where I'd start, if you haven't. Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 1, 2020 Author Share Posted February 1, 2020 Ohh man do I feel dumb?! I guess my only excuse would be that I was running it on this PC a couple of years ago and forgotten that I uninstalled after switching to Presonus...sheesh, that was an easy fix thanks very much! BTW, I didn't get any emails stating I had a reply to this...is there something I need to do besides check "Notify me of replies" in the bottom left? Thanks again all! Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 1, 2020 Author Share Posted February 1, 2020 So apparently it's no longer a CW issue but after installing the drivers I get no sound at all. I've uninstalled/reinstalled twice now and it does the same thing. Uninstalled I get sound except in CW and Win 10 recognizes the device...installed I get no sound. Any more advice other than buy something newer? Thanks, Randy Link to comment Share on other sites More sharing options...
chuckebaby Posted February 2, 2020 Share Posted February 2, 2020 Are the speakers plugged in to the scarlett or are you using PC speakers ? Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 2, 2020 Author Share Posted February 2, 2020 Yes I have 2 bi-amped Event 2020s plugged into it. Link to comment Share on other sites More sharing options...
John Vere Posted February 4, 2020 Share Posted February 4, 2020 (edited) What you are saying points to Windows is able to use the device possibly using generic drivers. Then you install the ASIO driver and Windows seems to not like this? With drivers installed what do you see when you hover the mouse over speaker icon in the lower right task bar of Windows? You should see a pop out window with something like " Line 1/2 Scarlett or Focusrite USB 100 % " If you left click the speaker icon and expand the dialog it will list the audio devices available. Choose the Scarlett. If it does not show then try reinstalling drivers and make sure you use a USB 2 port, I don't think 1st gen Focusrite supported USB 3. Edited February 4, 2020 by John Vere Link to comment Share on other sites More sharing options...
John Vere Posted February 4, 2020 Share Posted February 4, 2020 And make sure you have selected ASIO mode in Preferences Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 6, 2020 Author Share Posted February 6, 2020 Sorry for the delay, I'm not getting notification emails even with "Notify me of replies" checked. Anyway, yes Scarlett 2i2 shows up in Sound Settings regardless of whether the drivers are installed or not. After uninstalling I downloaded the drivers again (thinking maybe the last download got corrupted somehow) and installed. I open CW and it acts like everything is normal and recognizes the drivers...I hit play and there's no sound from an existing project. I close out and try to play a wav file with VLC media player and get no sound. I uninstall the drivers, restart and CW reports no drivers. I open VLC, play a wav file and it plays fine and Sound Settings (right click speaker icon in lower right and left click on Open sound settings) and it shows the device. I'm biting at the bit because I have a subscription to Composer Cloud and they recently added "Hollywood Background Singers" I would just buy a new interface but I just maxed out my credit card on camera equipment : ( Thanks very much for trying to help! Randy Link to comment Share on other sites More sharing options...
scook Posted February 6, 2020 Share Posted February 6, 2020 Can't help with Focusrite specifically but I can help you understand a few things about Windows audio in general. The audio interface shows up without the ASIO drivers because Windows has generic audio drivers. These drivers are used when selecting a driver mode other than ASIO in CbB and by most other Windows programs like VLC. The addition of ASIO driver by itself would not affect VLC. When using the same audio interface for CbB and Windows make sure CbB and Windows are set to the same sample rate. When testing CbB I would use something very simple like a single audio clip. One track to the master bus and out to the interface. Then concentrate on the audio preferences. Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 6, 2020 Author Share Posted February 6, 2020 47 minutes ago, scook said: When using the same audio interface for CbB and Windows make sure CbB and Windows are set to the same sample rate. ahh, I think you're onto something...it seems I use 48K in CbB because the music almost always winds up in a video. I'll try to set CbB to 44K and see if that makes a difference. Thanks very much, Randy Link to comment Share on other sites More sharing options...
G Randy Brown Posted February 7, 2020 Author Share Posted February 7, 2020 I thought I should follow up and let you know it has nothing to do with CbB. When I install the drivers I get no sound period...Focusrite support opened a ticket on it so hopefully I'll get this resolved. I'll try to add solved in the initial post. Thanks, Randy Link to comment Share on other sites More sharing options...
Raul Ragudo Posted July 18, 2020 Share Posted July 18, 2020 RANDY !!!?? did you get your focusrite/ Scarlett to be recognized? Douse it come up!? I have the same issue tonight!!! is this a common issue!? i go to the ......edit> pre> blah>blah> blah and when I end up on devices, it’s not there for me to check. I’m alerted me when something was disconnected it didn’t tell me that I disconnected my 2i2 but it did inform me .....??? what do I do!?!? Link to comment Share on other sites More sharing options...
G Randy Brown Posted September 2, 2020 Author Share Posted September 2, 2020 On 7/18/2020 at 3:56 AM, Raul Ragudo said: RANDY !!!?? did you get your focusrite/ Scarlett to be recognized? Douse it come up!? I have the same issue tonight!!! is this a common issue!? i go to the ......edit> pre> blah>blah> blah and when I end up on devices, it’s not there for me to check. I’m alerted me when something was disconnected it didn’t tell me that I disconnected my 2i2 but it did inform me .....??? what do I do!?!? Sorry Raul, I just now ran across this...no, I never got it resolved, I switched interfaces back to the Presonus. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now