kday

I installed the last regular version. I think my Cakewalk installation process may be corrupted from loading and unloading some VSTs maybe and possibly corrupted my Cakewalk Pro channel, or maybe the Pro Channel is corrupted so I'm trying to start from scratch with fresh builds and adding pro channels modules to see which one corrupts the Pro Channel rack.

Some I really like and been using for a long time. I think I might be able to pinpoint exactly what's the problem after rebuilding new templates from scratch to identify which pro channel or what may be doing the corruption. I'm getting VST Plug-In failed to load message when trying to load a Pro Channel altogether now. It won't load at all.

Yes, when I load some pro channel modules in multiple channels they default to On position. Like if i load reverb across a few channels and default them all to the off position, and leave the track and then come back one of them the Reverb is back on again. So I'm gonna try cutting off Write Automation to see if that help. But i already sorta fixed it a little bit by building a new template and not adding anything extra and it's not cutting on any extra Pro Channel modules yet. If I try to add some Pro Channel modules it may start to doing that again so I'm adding pro Channel modules and saving each build to pin point what Pro Channel module is doing the error. Now I'm getting VST Plugin-In Error VST Plugin-In failed to load. That may have something to do with the Pro Channel corruption. Thanks for all you help and I'm trying to add more channels until I get the bug to identify where it's coming from.

I give up on this Cakewalk Bandlab, it's shot. It's like Cakewalk with a broken arm, or Cakewalk without a professional Pro Channel because many are defective. I just hope this bug doesn't carry over to their new version since they may never know this issue exist.

Yeah, I did install the early release version and I did revert back to the old release and I 'm getting the same thing of automatic switching on for some of the pro channel modules. This issue could've been introduced a while back in a previous release, but I never went through all my track pro channels like I did recently when setting up a new template to notice many of them default back to the ON position after switching them off and exiting the track.

Sure I'll try it, but what do you think that do? And will it save all my workspace settings for when I reload the program? just asking Thanks

There is a bug in the Pro Channel modules that I'm experiencing. When you cutoff one of the pro channel modules in a track, and then leave that track and come back to it the Pro Channel that you switched off is now back on. I tried everything like re-loading the particular Pro Channel modules in the particular tracks affected, and reloaded the whole program and it still does the same exact thing. Not all tracks or Pro Channel modules do this, just some. I have to check every track's pro channels all day to see if any modules have switched itself back on in the modules that may be affecting my sound every time I leave a particular track. Have anyone else experienced this? Update: Doing a [reset my pc] in Win11 restored all the corrupted or missing Microsoft runtime libraries files as written in the other thread. Replacing an OS from another SSD still left the computer with corrupted files. So the rest my pc finally worked.

That's the reason I stopped buying Waves myself. The security battle over potential piracy turned my off. If their products were just serial number installs, I probably would've bought their whole collection. I don't buy software no more unless it has a crack for it first, that eliminates the reoccurring registering problem every so many months.

Hey thanks! I really appreciate all that you do to make sure everybody get a fair deal and not experience buyers remorse! As I try to make everyone feel they're getting the best possible rate. Many say that I'm usually as persuasive as a used car salesman though, trying to sell the last vehicle on the lot before taking a lunch. Since you're always a good sport, you get can 50% off! Use Code: "IGET50NOT60"

Oh, wow! That was a wild roller-coaster! I cutoff other equipment and it worked! No more Cakewalk brain freeze!

I tried selecting the Akai MPK249 MIDI Controller in the MIDI Devices Inputs and Outputs page in Preferences and I got this message MIDI Device Failure "The following Midi Port(s) could not be enabled" "The ports will remain unchecked in MIDI Device preferences" "There is not enough memory available" Indicating that the memory is Full, I never got this message before, especially for a MIDI controller. Anybody know what this message means ? Thanks

Yes, the scan in Sandbox option is checked. Should I leave it checked to help with scanning? It seems the Cakewalk is missing that important bypass corrupted/proprietary dll file option when scanning. And No way the whole scanning process should have to break down from a bad dll file being scanned. I thought they already had this bypass option built into it. Luckily this was an FL Studio dll issue that someone created a dll fix for. But there may come other programs with similar issues where a fix is not provided rendering a whole expensive program useless in Cakewalk because of no option to bypass like is in all my other DAW programs. In my MPC software, when a bad file is encountered, it just makes notice that a certain file is corrupted or incompatible and then it just keeps on scanning until finished. In Cakewalk, when encountering an incompatible dll file, it just stops scanning and shuts down the whole scanning process until the whole program has to be removed to continue the scanning process which is sorta 1980s.

Request for a bypass option when scanning a certain VST file during the scan process. When I scan the VST folder and encounter a so called corrupted file there is no way to bypass that file and continue with the scanning. Now the dll file wasn't corrupted but it came out as corrupted and the scanning process shut down as long as that dll file was in the scan folder. Can a bypass file option be added to continue scanning when a file stops the whole scan process when it comes up with some type of error? Because some companies make their VSTs files proprietary and won't scan with a 3rd party DAW, and we need to just by pass that file but we can't and it shuts down the whole Cakewalk scan process.

Due to so called corrupted VST file Cakewalk gets stuck on a certain VST in the VST folder when scanning and stops the VST scanning process altogether and having to remove the program. Is there a skip file process to bypass this error when encountered? Thanks

This is it! I lost track of this setting only because the Transport Control setting at the top always led me to the wrong Audio setting page that don't change. I used to go to that Audio Data page to make changes, but when i started using the Transport Control option at top I thought it was leading leading me back to that Audio Data page but it wasn't. I don't know why it makes you think it will adjust that particular Audio rate but then it doesn't. Thanks!

Is Bandlab aware of this situation where Cakewalk won't show 24bit on the transport control but only 16bits even when set to 24bits record?

Basically it was a useless suggestion offered in useless lip service. lol

Or you could learn to butt in someone else's business with unwanted suggestions?

Hey thanks for the link and the help. Man you are a appreciated resource for this website! That chordz program is great!

Where would I find the Input Echo on the virtual controller? I don't see it in insert Soft Synth Options in Synth Rack to the right nor as an ADD Track option, nor in the Midi track itself.

I can't get that to work. I tried everything. In the soft synth options tab I've changed every option and still can't get it to trigger a chord with that. I must be doing something wrong, and I can't figure it out.

Man it would be so cool if the Virtual Piano Keyboard from the Views Virtual Controller drop down had a Chord Button that does one of many different Chords when you play one Note! I want to be able to play one Note on the Virtual Keyboard and have an option to play one of many different Chords like on Roland FANTOM keyboard and Akai MPC and many other VST and DAW programs. This way would allow me to take advantage of the potential of many different VST programs that don't have Chord assigning ability.

Thanks appreciate it! I knew I had did it somewhere Appreciate it!

How can I hide or remove the Arranger and Tempo tracks? I see a hide function for Arranger but it's grayed out. I have no need for these types of tracks, so I want to increase my track space. Thanks

Hey Thanks! It worked I did that, but some tracks didn't follow the same input selected. Could be due to Track setting that prevents Mic settings. Couple went to something else. I'll see what the issue is, or maybe the track is corrupted and needs to start a whole new track. But Thanks! Appreciate it!