mgustavo

Hi, @Noel Borthwick ! Sorry for my post and thanks for the information! Actually I was going to write that "it's not being developed anymore" and changed the word on the last minute, but with small knowledge about the issue.

Hi, PremJ Hans! I've had this kind of issue while using TTS-1 mainly if there are tempo changes on the project as well as a loop selection. If you could check if is that the same situation I guess it's a known issue. Also this soft synth is a DXi type which is not being supported anymore, as I read on this forum. However there are many options recommended on the Instruments & Effects forum, including the Yamaha S-YXG50, which is similar to TTS-1 as it is 16 channel GM plugin (see the Freeware Instruments Thread ).

Hi, sjoens! Thanks for the reply! I had a better reading on online Help and saw it is possible to dock Multidock to the right and left edges, as well at the center. Thanks! Also I'll give a try to dock Inspector and Browser on Multidock to get full screen width. I've been dragging Browser to Multidock when I need to learn a song's lyrics, so I'll have more space to write it on Notes guide. It helps on workflow! Best regards

Hi, I think this commands are obsolete, but the new Tempo Track will let you set tempo ratios adjusting Offset Tempo Map. http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Tempo.11.html I hope this helps!

Hi, sjoens! Thanks for your response! However in my case the Browser appears normally on Track View, as well as the Inspector. But on other Views Browser won't show, but Inspector still does. Fortunately your post helped me to understand better this issue, and it seems to be related to Project Templates, as most of them will start with Inspector on the left edge and Browser on the right. However Browser will be above the Multidock, and Inspector is aside it! That's the reason why I have to click on Dock Options to (re) choose Dock to Bottom on Multidock. So if I have any docked View I should choose Dock at Bottom to adjust it better and let Browser to be aside Multidock! Also I've noticed that since Screenset 02 all screensets will show Browser aside multidock. However many Project Templates will start with Browser set above Multidock (Screenset 01), and one should do that trick to adjust it and let Browser be aside it.

Hi, I'd like to report an issue where Browser won't appear on other Views than Track View, unless one does a workaround with Dock Options Menu. The expected behavior is to hit 'B' key to see Browser on other Views, but that won't happen since Sonar Professional days. To resolve this issue one could click on Dock Options Menu at screen bottom and (re) choose Dock at Bottom, for example. Since this Browser will be available on other Views, like Piano Roll View, Staff View, etc. This is the minimum move to resolve it, but one could also undock Browser, dock it to the Left, undock it again and dock it to the Right, for example. I don't know if it's a known issue but if someone could reproduce it that will be much appreciated! Best regards,

Hi, I'd like to comment I have an UM2 interface too and it's been working well with BEHRINGER USB AUDIO 2.8.40 driver. Also it has Direct Monitor selector which could help when doing screen capture and related jobs. Also I've made broadcasting (*) with Skype and Zoom and it worked fine, but I don't know if it is the same with OBS! (*) chat video broadcasting

Hi Jeremy Oakes, I don't know if it helps, but you could try to use Matrix View. I've used it a few times, but I was trying to get similiar results to Cyclone DXi (i.e. trigger samples from my MIDI controller, etc.) Best regards,

Hi, Skyline_UK, I used LICEcap a few times, as well as Format Factory. They are both simple, maybe it could help! * Format Factory is used to convert file format but also has this new feature to do screen capture. Best regards EDIT: Sorry, my bad! These softwares won't record audio (FF does but won't recognize audio interface other than PC onboard audio).

Hi, sadicus. Thanks for the indication! I'll give it a try! Chordastic was a bit pricey for my budget.

Hi, I'd like to add I tried to reproduce this issue on other Non English local languages and it also occurred there. Thanks!

Hi, I'd like to add I tried to reproduce this issue on other Non-English local languages and it also occurred there. Thanks! Edit: Also it seems the issue only happens on the last itens of Event Manager dialog box, e.g., Articulation, Expression, Hairpin and Chord.

Hi, it seems Event List has an issue when I try to change the type of event in the Kind of Event column (*) When I click on it the Kind of Event dialog box will appear, but if I choose Chords, for example, the Choose Articulation dialog box will open. If I choose Expression the Hairpin options will be enabled, etc. (*) I tested this issue with English language and there was no problem, but with Brazilian Portuguese language the bug occurs! Thanks in advance!

Hi @sadicus I've tested Chordastic app to write chords over lyrics and it does a good job. https://www.chordastic.com/ I hope this helps!

RIP Bill ?

Hi, I'd like to comment that an alternative to waltz feel could be the use of Midi Fx Midi Quantize on the Fx bin. Sometimes I use it on melodies, setting the resolution to 1/8 triplets or 1/16 triplets. Maybe it could work on a click track! By the way, John Vere nice rhythm MIDI clips, thanks for sharing!

Hi, I'd like to ask the Bakers if the following issues could be adressed: 1. CbB as well as Sonar Professional won't insert chords on SV as expected on Brazilian Portuguese language. I've been in touch with a Cakewalk support employee who asked me to do a screen recording about the issue, on November 2020. He could reproduce it and told me it could soon be adressed. : ) Insert chords on Staff View - empty group (video) https://www.youtube.com/watch?v=oEhRJU-F15I OP about this issue: https://discuss.cakewalk.com/index.php?/topic/21273-insert-chords-on-staff-view-empty-group-solved/ 2. The other is that note draw duration buttons (*) won't change if one clicks on a note on the Staff Pane with last touched note enabled. Please note note value will change when a note is clicked, but note draw duration buttons won't follow the change. (*) on Staff Menu (The same won't occur on Piano Roll View where the changes will happen as expected). 3. Also if CbB could export Music XML files at version 3.0 it would be cool! : ) Thanks!

Hi, jack c., thanks for the reply and for your comment! I'm glad you liked the recording! I also enjoy Ivan Lins songs, he's a very talented musician! Also I intend to redo some parts of the music, as well as complete the arrangement. I just started a few songs to see if I could make a nice playlist to play live in public places or to distribute on internet. But I also don't have much practice with this job, so I'm intending to practice more the guitar parts and parts I play with controller keyboard, and then try to quantize the hard things to play (actually I do it sometimes but I still can't hide that is edited audio!). Best regards,

Hi, David Sprouse! Thanks for your kind words and I'm glad you liked it! By the way I remember listening to a jazz tune you posted on this forum, very sophisticated too! I'll see if I can find it on my web browser. Best regards,

Hi, I'm recording some musics with CbB and I'd like to ask if you could make comments about a cover I did of Sampa, a brazilian music from C Veloso. It has a simple arrangement, so it won't have much mistakes! Thanks in advance!

Hi, pwalpwal! Thanks for the reply, it worked! I've just changed M Edge settings and it is showing images again! Best regards, Edit: Anyway it won't hurt if I update my bookmark address and let browser with its default settings. ?

Hi, Promidi! Thanks for the reply! Yes, I've just tried opening Online Help with another browser and it worked, thanks! I tried to open it from Discuss Cakewalk forum and it worked, so I checked out my preferred browser to see online help, which is M Edge and I saw it had an old URL on the address bar. It seems Cakewalk site URL with 'https' is buggy now and one should open it with 'http' protocol. It's funny because it has always worked! Best regards,

Hi, it's a been a few weeks that I've noticed online help won't show images and the site is very show too. This results in only text pages with a broken icon where the pictures should be. * the site is very slow too Is there someone else seeing this or is just me? Thanks!

Hi, grannis! I think that's right, if you preview WAV files on Media Browser with Preview at Host Tempo enabled it will sound the way you described. But if you insert it on project it will play on its own tempo. On these cases you could adjust clip tempo on Clip Properties Inspector, under Groove Clip section. But as it is a bit complex IMO I’d suggest you to read the CW Reference Guide, depending on your experience with CbB. But in short you could both adjust clip as a simple clip or as Groove Clip (clicking Ctrl + L will toggle between one and another). However you could also preview Groove Clips files as well as ACID WAV and REX files on Media Browser, because they have internal marks which turn them better for loop purposes. Then when you drag them into the project they will sound as expected. For better information see How Groove Clips work in Cakewalk : https://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Looping.07.html I hope this helps! Best regards

Hi, I've tried a few times do what OP intends, and I used Word to do that, but it's a bit complex, as one should be familiar with paragraph spacing, etc. (I hope I'll try again next time!). But recently I did chord notations on a song's lyrics with Photoshop Elements. One could print the lyrics to PDF, open it on Photoshop and write the chord names to taste (then he could copy and paste repeated chords to get a more standard result).