Jump to content
Adam Casey

Icon Platform-M, Sonar Platinum

Recommended Posts

Dropping in here. Looking for a controller my self for CbB. How is I-con platform performing (or other Qcon controllers for that matter)?

 

Share this post


Link to post
Share on other sites
On 5/16/2019 at 2:40 PM, msmcleod said:

Perhaps its worth trying the MackieControl surface again?

I had a similar problem with jerky / slow / unresponsive faders with my Mackie MCU until I upgraded the firmware.

The other thing to look at is your MIDI buffer settings:

image.png.b0c0932e0120dc93e13804ea405fc1e1.png

Control surfaces are VERY chatty over MIDI, so there's a possibility that it could be losing MIDI messages if this is set to too small a value. I've got mine set at 750, which works well for me.

Also avoid having your surface connected to a USB hub - have it connected to a dedicated USB port if possible.

You have to readjust the faders and touch sensitivity, turn off, turn on holding pan 1 down wait a few seconds release. The faders will go up and down rapidly, use pan 8 and slow it down don't have it set too fast you will get juddery faders. Once set press pan 8. To adjust touch, turn off , turn on holding down pan 2 the more lights on the worst the sensitivity, take it down to 2 lights via pan 8 then press pan 8 to accept.

Share this post


Link to post
Share on other sites

By the way, the mixer button does not call up mixer, use f8 key if you have platform b+ I e not sussed on platform m+ how to call up mixer, you could change it to f3 with editor and save as sonar file

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...