kelvin 0 Posted January 25 How the routing of midi signal from "midi track" to "audio track"? With the picture attached The picture are shown with all the tracks 1) Track 3 is midi note track 2) The midi note is inserted into "SI-string" instrument(Track 2) 3) Track 1 is a Aux track of instrument(SI-string), 4) Whenever the Track2(Vsti track) is muted or not, Sound of the midi note can be hear on the Master track. But the mute is functional on Track3(midi track) and Track1(audio track). Share this post Link to post Share on other sites
scook 2,747 Posted January 25 Based on the track icons Track 1 is not an aux track (in the way Cakewalk uses aux tracks), it is a synth audio track, Its input is the audio from a synth plug-in. Aux tracks receive their audio from other audio tracks. Track 2 is an instrument track Track 3 is a MIDI track WRT routing image showing Tracks 3 > Track 2 > Track 1 with track 2 muted Track 3 is routed to a synth according to the image Track 2 has no output routing Track 1 has its input set to a synth and its output goes to the Master bus. IOW, it appears track 2 has nothing to do with track 1. 1 Share this post Link to post Share on other sites
kelvin 0 Posted January 26 Yes, You are right It checked with both situation on track2 (Instrument VSTi), the result are same. Both result are, It can't mute on the track2(Vsti track) 1) set the Vsti open to a Aux track, 2) set the VSti open to a Audio track. Both situation, track2 has nothing change on track 1......? Thank you Share this post Link to post Share on other sites