Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 10/25/2021 in all areas

  1. 13 points
    Hello All, Native Instruments turns 25, and to celebrate, they've released a free instrument called, "Twenty Five". Download Twenty Five Read More about 25 https://www.native-instruments.com/en/products/komplete/play-series/twenty-five/
  2. 6 points
    They should followed IK and have a buy one get 24 free sale. Now that would get me to celebrate
  3. 5 points
    To avoid copying IK they decided to instead promote “get one free buy 24”.
  4. 4 points
  5. 4 points
    The good news for you is that the cpu usage, although high, is relatively constant across versions. This means that you can stick with the latest. One thing that would be nice is to have settings for performance items. For example, have a few CPU hungry features of AT5 having the possibility to be disabled. One example would be disabling VIR. Since the CS version works without it, it wouldn't be that hard to do I am sure. There may be other areas that could be switched off so that it runs smoother, albeit at the cost of some audio fidelity. Just a thought.
  6. 4 points
    It's not on the list...even though it should be...so no freebies... They could have allowed you to BUY The Resonator as a "get in" product and left it off of the "Freebies" list...
  7. 3 points
    Correct, please check from bottom up. I prefer most recent at the top, but... that's not how it is in this case. I have made my feelings known, though. The most recent buttons at at the bottom should show your multiple choices/
  8. 3 points
  9. 3 points
    Luxury! My first computer was an Atari 400 with a clock speed of 1.79 MHz and 8K of RAM. And a membrane keyboard! I actually worked on computers where the user interface was toggle switches and LEDs used to enter and display binary code. This was the beast. And people complain about the SampleTank UI.
  10. 3 points
    I am from the old school of 120mhz cpu and 16mb of ram!! I rarely run more than what I need to get the job done. If I do need more I will freeze trust as needed and move on. I don't want to waste time trying to troubleshoot/problem solve while I am getting song wrote. When the time comes I have methods to get around limitations that present themselves.
  11. 3 points
    for Halloween! https://wrongtools.com/kontakt-instruments/trapeze-organ/
  12. 2 points
    Hi there fellow Cakewalk by BandLabbers! Please give our new song love's eyes opened a play and let us know what you think. Best wishes on a sunny day in Birmingham UK. Keep on playing you never know who's listening! regards paul
  13. 2 points
    Up to 60% off and $400 off Hollywood Orchestra Opus Edition Extra discount with code GROUP at JRR https://www.jrrshop.com/eastwest?dir=asc&order=name
  14. 2 points
    @Grem Glad it worked out, we're definitely looking forward to next year to continue to make improvements and hopefully have a deal that can at least match this one if not surpass it. We're going to need to figure out how to give that one lucky 2022 Group Buy participant their free @InstrEd (and only give a free MIDI controller to another random person, plus whoever wins InstrEd will have to show proof they have no MIDI controllers at all and sign a contract agreeing to not buy or receive on for at least one year).
  15. 2 points
    For those that don't know there is a also a stripped down version of this plugin via Computer Music Magazine "free" with purchase of the magazine. Audio Thing Orb CM
  16. 2 points
    This seems to be the case. I selected an "Available" from the bottom. I got two choices (IOW both of my qualifying products showed up). Then I selected a choice from the higher dollar slot, confirmed, went back to the Promotions page and now I have 24 "Available" buttons!! So it will only show so many choices, then as you choose the others appear. It's all good now!! Thanks to @NOLAGuy @cclarry@Peter - IK Multimedia for helping me out. I get it now!!! LOL 😆😁
  17. 2 points
    Zo, I'm sorry, I am at work so I didn't get the chance to download and install it yet. I was trying to beat Larry to posting it. LOL 😁 I know he already has it posted somewhere in this forum at 3:00 am early bird time!
  18. 2 points
    I haven't upgraded (yet), but believe in Opus you can download even single instruments/sounds if you want, as Guy Michelmore demonstrates here. https://youtu.be/CTqsxR_z9X8?t=270
  19. 2 points
    Today's free offer: Archmachine https://puremagnetik.com/products/archmachine
  20. 2 points
    No, Downloaded the update assistant and used that. J
  21. 2 points
    Free percussion library! Pumpkin patch out now. Also Halloween Sale! Introducing Pumpkin Patch - a fun and simple percussion library created entirely from a pumpkin. Recorded dry and up-close in a kitchen, this library offers a surprisingly wide range of sounds from hits, slaps, chops, flicks, squelches and shakers. https://fracturesounds.com/product/pumpkin-patch/ Halloween Sale! Halloween Sale Save 30% on our two spookiest libraries, Toy Piano and Tiny Music Box, until October 31st! https://fracturesounds.com/product-category/halloween-sale/
  22. 2 points
    🙃😀😃😄😉😛😜🤪😝🤑 Is all I have to say!
  23. 2 points
    Absolutely worth it. Opus changes the entire Hollywood Orchestra into something new and extremely useful.
  24. 2 points
    Acoustic guitar masterclass - the sound really dances out of my headphones - I'm reminded of some of Ant Phillips' finest solo work. All round excellent. Andy
  25. 2 points
    I been doing demo tracks using MODO drums + MODO Bass and AT 5. No issues Mind you , I am only using 1 or 2 instances of AT 5 and nothing fancy. Just a one amp custom preset. I am on an older Xeon CPU.
  26. 2 points
    What is this "sleep" you speak of?
  27. 2 points
    Except that the Resonator UI for Kontakt is much better than SampleTank. Don't get me wrong, I'm not dissing SampleTank here, but this instrument begs for intuitive control, and the SampleTank UI is a bit meh for that.
  28. 2 points
  29. 2 points
    OK, I did the install of AT5 5.03. Here is the results. Using the same preset of mine (not default) as I did in this post, I ran the test as before. AT5 (5.03) 2% single instance. Six instances was 12% - 13% Then I added the Leslie as a second speaker cab to the preset and the CPU was 26% for all six instances! AT4 (4.10) single instance was 2%. Six instances was 20% with Leslie as second cab. Reinstalled 5.2.0 AT5 (5.2.0) Default preset 2% single instance. 15% - 17% six instances. With my preset Silver Plate 50 and matching cab, in the rack TERC, Digital Delay, Hall Reverb six instances 20%. - 22%. Add the Leslie as a second cab and the CPU is 25% - 26%. ON par with 5.03 and AT4 Add a second amp to the signal chain with the output going into a leslie and CPU is 29% - 30%. Add MODO drums to the mix... well it wasn't pretty. Stuttering, glitchy playback. Buffer was set to 1024. Had to archive 5 of the trks then playback was fine. Add MODO Bass...
  30. 2 points
    Smells like tube spirit.
  31. 2 points
    Not the wurst thing I've seen here..
  32. 2 points
    @DallasSteve You should post your songs. Dont be put off by others and their productions. You should have heard mine when I first started. Everything i know I have learnt here.. and by posting and getting feedback you improve your craft. Its a nver ending learning curve. So go on... get posting and you'll be surprised the feedback you get on how to improve and how your posts helps others. Looking forward to hearing some of your stuff if you dare!!
  33. 2 points
    Geostationary Orbit over the Greenwich meridian.
  34. 2 points
    I won. The VSTi has a ciclic noise. 6 audios and 3 are the real Wurlitzer.
  35. 2 points
    I hope Peter is reading this, you can quote Larry on this!!
  36. 2 points
    Nope...Ik's good enough for me
  37. 1 point
    Tomorrow AYAIC MIX MONOLITH will become available for 48hrs in our PA_EXT pop-up store. Are you ready? About Mix Monolith https://www.ayaicinc.com/mix-monolith Will post pop up link when available https://www.plugin-alliance.com/en/products.html
  38. 1 point
    No not me. I just went to windows and installed the installation media.
  39. 1 point
    Hi Larry, very enjoyable and I liked the Guitar a lot. pretty cool Nigel
  40. 1 point
    Mark - I loved the original and I really love this as well - great playing Cool stuff Nigel
  41. 1 point
    Great stuff Wookie - really getting into your stride with all these Gas Giants!! Love it Nigel
  42. 1 point
    Merci beaucoup Jacques, c'est très apprécié!
  43. 1 point
  44. 1 point
    Sheesh, they've sent me at least six emails about this. They are sure determined to give me Elements! Ironic that their thank-you for already buying Ozone 3, 4, 5, 6, 7 and 8 is a free copy of Ozone Elements. Can I exchange that for something useful, maybe a free upgrade to RX9?
  45. 1 point
  46. 1 point
  47. 1 point
    Howe Gelb "Available Space"
  48. 1 point
  49. 1 point
    Very nicely done indeed - the guitars and vocals are excellent Great job Nigel
  50. 1 point
    I am guessing there is more than one way to accomplish what I was trying to do but this is what finally worked for me.. Here are my notes - The Loop Construction Tool – Only is available in Recording and Advanced workspace . Won't open in Basic. The Loop Construction tool is independent from the regular Cakewalk transport operations. Here is the procedure I used for my first successful Groove Loop. Created the 4 track loop. Exported the loop. Imported the loop to a new track *Selected the new track – I had tried going to Views - drop down and selected Loop Construction to open the Loop Construction Tool, but this works best for me Select the Clip and hit alt+7 (this opens the Loop Construction Tool) The Loop button turns looping on and off, and the remaining options all relate to editing the loop. When Looping is turned off, the clip displayed in the Loop Construction Tool can be Slip edited for trimming , i tweaked it a bit. After trimming, a shaded area shows the part of the clip that will be edited when looping is turn on. And, the remaining editing options can be also preformed. When editing, Cakewalk warns if data will be discarded. If you change the number if Beats, the tempo will be changed, this came into play below. There is a View Zoom Tool in the bottom right hand corner that adjusts horizontal zoom. The audio scale can be changed by Clip Dragging on the scale at the left. Once I was done editing, I closed the Loop Construction Tool to return to the Track view where the loop can be rolled out as required. The Loop Construction Tool can be reopened for further editing by double clicking. - Didn’t work, I used Alt 7 instead. Note - I left Loop enabled and closed the tool. I could then now roll the loop track out but the playback speed became way too slow. I had to turn Loop Construction back on and left Loop button on, I played with the number of Beats and was able to adjust the tempo in the extended loop to correct the slow down that had occured. Closed the Loop Construction Tool and I have my 4 minute drum loop to track my guitar and vocals to. When my guitar and vocals are completed, I will then record a full drum part. When that's done I will bring my collaborators in to create whatever parts they feel would enhance the tune. Thanks everyone for you suggestions. I did a lot of research and testing on this simple thing but I think I now have a handle on it for future projects. Since I am a drummer, I prefer creating a part with the correct feel to it for the tune I am writing. A standard metronome just doesn't project a "Feel" to the tune.
×
×
  • Create New...