Niilo Hatakka Posted April 6 Share Posted April 6 (edited) Just got a system set up to record some tunes with and i was working on double tracking guitars. At first it worked fine but now for seemingly no reason there's a bit of a panning problem. At 0% panning the audio is quiet and only on the right side. When at 100% left OR right it's at full volume down the middle. I've cleared the automation lines and tried restarting (multiple times, also tried opening older projects without the issue and making a new one - they all had this issue now), which in other words means I'm out of ideas and knowhow. Any thoughts and help would be appreciated Edited April 6 by Niilo Hatakka tags added Link to comment Share on other sites More sharing options...
Chaps Posted April 6 Share Posted April 6 Are the two guitar tracks the only tracks playing? Have you tried reversing the phase on one of the tracks? Link to comment Share on other sites More sharing options...
Amberwolf Posted April 6 Share Posted April 6 If all audio ends up this way, not just the guitars, there is something in your audio monitoring path causing the problem. This could be a ground on your monitor audio cables, or a plugin or console setting within CbB, or in the audio interface settings or cabling, or if you use an external mixer it could be something there. If it is only on the guitar tracks, then it has to be something common to all the projects with the problem, which almost certainly has to be a plugin on those tracks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now