msmcleod Posted February 20 Share Posted February 20 @Archerdrummer / @Waldemar Pawlik - can you confirm whether this happens in all cases, or only when the PRV is open? Link to comment Share on other sites More sharing options...
Archerdrummer Posted February 20 Share Posted February 20 Thanks, Mark. This occurs in all cases and PRV is not on. Link to comment Share on other sites More sharing options...
Waldemar Pawlik Posted February 20 Share Posted February 20 16 hours ago, msmcleod said: @Archerdrummer / @Waldemar Pawlik - can you confirm whether this happens in all cases, or only when the PRV is open? What is PVR? Link to comment Share on other sites More sharing options...
Xoo Posted February 20 Share Posted February 20 Piano Roll View. Link to comment Share on other sites More sharing options...
Waldemar Pawlik Posted February 21 Share Posted February 21 17 hours ago, msmcleod said: @Archerdrummer / @Waldemar Pawlik - can you confirm whether this happens in all cases, or only when the PRV is open? PVR is not on. Link to comment Share on other sites More sharing options...
Mannymac Posted February 21 Share Posted February 21 Same here, where can I find the installer for the previous version? Link to comment Share on other sites More sharing options...
Waldemar Pawlik Posted February 21 Share Posted February 21 11 minutes ago, Mannymac said: Same here, where can I find the installer for the previous version? From what I've gleaned, there doesn't seem to be a way to roll back this latest update😠 Link to comment Share on other sites More sharing options...
Archerdrummer Posted February 21 Share Posted February 21 @Mannymac I happened to keep previous versions in my Downloads folder. I had to install earlier versions first but it only took a couple of minutes. 1 Link to comment Share on other sites More sharing options...
Andrey_rbk Posted February 21 Share Posted February 21 (edited) The "Quantize" window appears 1-2 seconds after pressing. Before this update, it was displayed instantly. The remaining windows are displayed faster, but generally slower than in the previous version. Please fix this. I often use “Quantize”, it has become inconvenient to work with. Edited February 21 by Andrey_rbk Link to comment Share on other sites More sharing options...
Johnny Tsao Posted February 22 Share Posted February 22 (edited) The Inspector, Reverb, and Chorus knobs in the MIDI channel do not work. As soon as you adjust the knob, the setting value will return to zero. I capture the screenshot below and hope this bug can be fixed, Thank You! (Win11 23H2, Sonar ver. 2025.02 Build 049, TTS-1 and Other MIDI Sound Modules have the same problem, In the old version of CbB it works!) Sorry for bad english! Edited February 22 by Johnny Tsao 1 Link to comment Share on other sites More sharing options...
Promidi Posted February 23 Share Posted February 23 On 2/22/2025 at 5:02 AM, Andrey_rbk said: The "Quantize" window appears 1-2 seconds after pressing. Before this update, it was displayed instantly. The remaining windows are displayed faster, but generally slower than in the previous version. Please fix this. I often use “Quantize”, it has become inconvenient to work with. The “Quantise” Window appears instantly here. 20 hours ago, Johnny Tsao said: The Inspector, Reverb, and Chorus knobs in the MIDI channel do not work. As soon as you adjust the knob, the setting value will return to zero. I capture the screenshot below and hope this bug can be fixed, Thank You! (Win11 23H2, Sonar ver. 2025.02 Build 049, TTS-1 and Other MIDI Sound Modules have the same problem, In the old version of CbB it works!) Sorry for bad english! I tried this with another synth that responds to CC91 and CC93. It responds correctly when I adjust the Chorus and Reverb knobs in a MIDI track routed to that synth. I tried this with “ShowMIDI” and UVI workstation. Link to comment Share on other sites More sharing options...
Johnny Tsao Posted February 23 Share Posted February 23 (edited) @Promidi Thank you for your reply! I'm pretty sure that Sonar Ver.2025.02 Build 049 has a real bug with the Reverb and Chorus knobs on the MIDI Inspector. * After yesterday’s reply, I also upgraded Windows 11 to 24H2. The new version of Sonar also has the problem, so the problem with the OS version is ruled out. To do this, I rolled Sonar Back to an older version, and here are the results of my tests: Ver. 2024.09 (Build 105) → Works! Ver. 2024.11 (Build 097) → Works! Ver. 2024.12 (Build 004) → Works! Ver. 2025.02 (Build 049) → Not Works! After upgrading Sonar to the latest version, I tested it with UVI Falcon, and unsurprisingly, the problem reappeared. Here is a screenshot of the verification operation: Edited February 23 by Johnny Tsao Link to comment Share on other sites More sharing options...
Promidi Posted February 23 Share Posted February 23 1 hour ago, Johnny Tsao said: To do this, I rolled Sonar Back to an older version, and here are the results of my tests: Ver. 2024.09 (Build 105) → Works! Ver. 2024.11 (Build 097) → Works! Ver. 2024.12 (Build 004) → Works! Ver. 2025.02 (Build 049) → Not Works! After upgrading Sonar to the latest version, I tested it with UVI Falcon, and unsurprisingly, the problem reappeared. Here is a screenshot of the verification operation: I also tried it with UVI Falcon with Gospel Musicians TGX99. I MIDI learned CC91 to reverb mix using a MIDI controller. (as per your first screenshot) MIDI controller moves the reverb mix knob on the TGX99. The reverb Knob on the MIDI track inspector also moved the reverb mix knob on the TGX99. This is with Cakewalk 2025.02 (Build 049) Link to comment Share on other sites More sharing options...
Johnny Tsao Posted February 23 Share Posted February 23 3 minutes ago, Promidi said: I also tried it with UVI Falcon with Gospel Musicians TGX99. I MIDI learned CC91 to reverb mix using a MIDI controller. (as per your first screenshot) MIDI controller moves the reverb mix knob on the TGX99. The reverb Knob on the MIDI track inspector also moved the reverb mix knob on the TGX99. This is with Cakewalk 2025.02 (Build 049) Got it! Thank you for your reply. We will leave this issue to our R&D team to clarify and confirm. Link to comment Share on other sites More sharing options...
AndrewMcMechan Posted February 23 Share Posted February 23 Hi all - willing to believe most of all of these may be due my lack of knowledge, but if not, help? 1. Articulation Maps Editor - when I open, there is no longer a "+" to add a new art map. I can work around by copying, duping, and editing, but not sure why that feature went away. 2. Not specific to latest release, but since I'm here, "Old Sonar" let you open multiple projects at once. I don't seem to be able to do this anymore, even in safe mode. It made copying from one project to another much easier. 3. Crashes. A lot. Started last release, hoped it would be fixed. Doesn't appear to be a specific cause. Link to comment Share on other sites More sharing options...
Promidi Posted February 23 Share Posted February 23 10 minutes ago, AndrewMcMechan said: Hi all - willing to believe most of all of these may be due my lack of knowledge, but if not, help? 1. Articulation Maps Editor - when I open, there is no longer a "+" to add a new art map. I can work around by copying, duping, and editing, but not sure why that feature went away. 2. Not specific to latest release, but since I'm here, "Old Sonar" let you open multiple projects at once. I don't seem to be able to do this anymore, even in safe mode. It made copying from one project to another much easier. 3. Crashes. A lot. Started last release, hoped it would be fixed. Doesn't appear to be a specific cause. 1. Can we have screenshot? In the Articulation Maps Editor, I have always seen the + to the right of the delete icon. Are you sue you’re in the “Articulation Maps Editor” screen and not the “Choose Articulation” screen? 2. Preferences - File - Advanced (Advanced) > deselect “Allow Only One Open Project at a Time” 3. What have you tried so far. What are your project specs (Driver mode, sample rate, bit depth, buffer size. Latest drivers?) 1 Link to comment Share on other sites More sharing options...
AndrewMcMechan Posted February 23 Share Posted February 23 Screenshot - no "+" where I normally found it. 2. Thank you for preferences tip. 3. Crashes - I will document more clearly when it happens again. Still early here, apologies. a. Link to comment Share on other sites More sharing options...
Promidi Posted February 23 Share Posted February 23 7 minutes ago, AndrewMcMechan said: Screenshot - no "+" where I normally found it. I loaded your screenshot in a graphics editor and the + is present, but it is very faint. Which theme are you using? Link to comment Share on other sites More sharing options...
AndrewMcMechan Posted February 23 Share Posted February 23 OK, not sure why, but that seems to be the cause. I had changed my theme when the new version downloaded. I just returned it to Tungsten, there's the pesky little "+" again. Thanks, Promidi. Link to comment Share on other sites More sharing options...
IgoRr Posted February 23 Share Posted February 23 2 hours ago, Promidi said: Which theme are you using? Good day! I have just checked - I also have this plus sign very weakly, I use the Tungsten Classic theme (always). In the latest versions of modern Sonar, problems with the graphic display of some elements have become almost commonplace, I have repeatedly described here problems with the display of texts in some sections. But I see that users are simply forced to switch to Windows 11, despite the fact that the developers deny it. Although, judging by the design of the screenshot, AndrewMcMechan has Windows 11 installed, and the problems with the display also remain. In Cakewalk from Bandlab this icon is very well visible in all themes, I am attaching screenshots: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now