Sander Verstraten Posted October 3 Share Posted October 3 (edited) Here's a handson video of an upcoming feature update for Tonex soft and firmware, adding delay and modulation. Looks impressive. Edited November 14 by Sander Verstraten 7 1 Link to comment Share on other sites More sharing options...
ALC Posted October 3 Share Posted October 3 https://www.ikmultimedia.com/products/tonex/#nl_form_area Scroll down to New TONEX FX. New TONEX FX Coming Soon A free update is coming soon for all TONEX users. It includes 8 new FX, including 2 delays, chorus, flanger, tremolo, phaser, rotary and new spring reverb. Two new FX blocks can be configured pre- or post-amp and cab for maximum customization. The 8 FX are compatible with TONEX Mac/PC, TONEX Pedal, and TONEX ONE. The software and firmware updates will ship in November 2024. 7 Slots with 15 FX Modulation: Chorus, Tremolo, Phaser, Flanger, Rotary Delay: Digital, Tape Reverb: Spring 1, Spring 2, Spring 3, Spring 4, Room, Plate Compressor Noise Gate Compatible with TONEX Mac/PC, TONEX Pedal, and TONEX ONE 2 Link to comment Share on other sites More sharing options...
Brian Walton Posted October 3 Share Posted October 3 I wonder what the Expression Pedal input will be able to control here. Having a full blown midi controller is going to make this unbelievable, but that is also a pretty big investment in both cost and figuring out how it works. Being able to turn on and off effects with a simple expression pedal input would have a lot of value in a potentially small space. And if it could use all 3 buttons on say a FS300, that would be mind blowing. 1 Link to comment Share on other sites More sharing options...
Last Call Posted October 3 Share Posted October 3 (edited) How on earth do you browse 35000 captures!??!?!? That is so crazy. I finally got it to work on my MAC and judging by the preview alone... there is no contest Tonex wins (although I would like to get my hands on the new Nano Cortex). (EDIT: Seems captures are where it's at!) Edited October 3 by Last Call 1 Link to comment Share on other sites More sharing options...
Nitrate Audio Posted October 3 Share Posted October 3 6 hours ago, Last Call said: browse 35000 captures!??!?!? That is so crazy. yup. it is. and this is why i have 10 favs and everything else hidden. there is something called too many options. 1 2 Link to comment Share on other sites More sharing options...
RSMcGuitar Posted October 3 Share Posted October 3 That new spring reverb sounds way more like what I'm after. Nice. I feel like, so far, IK has done an amazing job with ToneX, including the rollout. It definitely felt somewhat unfinished on first release, but the sounds were there. They've done a great job fine-tuning it and it's very nice these have been free updates! 2 Link to comment Share on other sites More sharing options...
Brian Walton Posted October 3 Share Posted October 3 51 minutes ago, RSMcGuitar said: That new spring reverb sounds way more like what I'm after. Nice. I feel like, so far, IK has done an amazing job with ToneX, including the rollout. It definitely felt somewhat unfinished on first release, but the sounds were there. They've done a great job fine-tuning it and it's very nice these have been free updates! Yep, every time the "IKM hate" starts up I have to point out to others that TONEX is literally one of the best music products to hit the market in at least 10 years. It isn't perfect but it is a wonderful product that has made great tone available/attainable to just about anyone not in a 3rd world country. 7 Link to comment Share on other sites More sharing options...
IK Multimedia Posted November 7 Share Posted November 7 November 14th is the date, in case folks are interested: https://www.ikmultimedia.com/news/?id=TonexFxReleased 1 4 Link to comment Share on other sites More sharing options...
Brian Walton Posted November 7 Share Posted November 7 (edited) 28 minutes ago, IK Multimedia said: November 14th is the date, in case folks are interested: https://www.ikmultimedia.com/news/?id=TonexFxReleased Yes, very. Thanks for finally coming out with the date. Giving it to all the influencers (many of which have created less captures than non influencers) and teasing it for over a month has been annoying. Look forward to it Also please talk to the dev team to make the trs jack compatible with the DigiTech 3 button fs3x configuration to allow bank up/down and tap tempo. Prior to the update it can't even handle the bank up and down of that common switch type Edited November 7 by Brian Walton 2 Link to comment Share on other sites More sharing options...
BTP Posted November 14 Share Posted November 14 (edited) What’s new in version 1.8.0: Improved DSP chain with new effects and flexible routing New Modulation block includes 5 stereo-to-stereo BPM-syncable modulation FXs: Chorus, Tremolo, Phaser, Flanger, Rotary. New Delay block includes 2 stereo-to-stereo BPM-syncable delay algorithms (Digital and Tape) and 2 modes (Normal and Ping Pong). New Spring 4 algorithm added to the Reverb block. Revamped Noise Gate: now it allows for a faster release and more flexibility. Its action can be moved post-amp. Each FX has its own parameters and settings are retained when changing FX. BPM sync working on a global or preset basis. TONEX Pedal firmware 1.5.11 Added support for the new DSP chain. Delay and Modulation FX parameters are accessible from the PARAMETER knob sub-menu. Global Setup and Parameter menus navigation improved. Added Tap Tempo feature accessible from within the Tuner mode. Added BPM Setup sub-menu to the SETUP menu. Added MIDI sub-menu to the GLOBAL SETUP menu. TONEX ONE firmware 1.2.6 Added support for the new DSP chain. Added Tap Tempo feature accessible from within the Tuner mode. New Tone Model Advanced Search feature in local library. Fixed a crash in Logic when loading the plugin in a multi-mono track. General reliability improvements. Edited November 14 by BTP 1 1 Link to comment Share on other sites More sharing options...
TheSteven Posted November 14 Share Posted November 14 (edited) Great news but… I’m going to wait till after this weekend to do the firmware update and let the 1st wave of adopters validate that it’s stable. Also I dont need a firmware update to crash in the middle because of bandwidth issues due their website getting swamped. Edited November 14 by TheSteven 2 Link to comment Share on other sites More sharing options...
IK Multimedia Posted November 14 Share Posted November 14 47 minutes ago, TheSteven said: Great news but… I’m going to wait till after this weekend to do the firmware update and let the 1st wave of adopters validate that it’s stable. Also I dont need a firmware update to crash in the middle because of bandwidth issues due their website getting swamped. Firmware would be downloaded completely and then updated locally. For best stability you might want to pay most attention to having a stable USB connection, without hubs with a million things plugged in, don't have multiple TONEX devices plugged in, and such. 4 1 Link to comment Share on other sites More sharing options...
IK Multimedia Posted November 14 Share Posted November 14 Also, this is the video to go along with the release: 7 2 Link to comment Share on other sites More sharing options...
kitekrazy1 Posted November 15 Share Posted November 15 For all of the IK bashing elsewhere it's nice to see developers actually upgrading their products. 90% of the time other developers are upgrading their distribution apps. 6 Link to comment Share on other sites More sharing options...
IK Multimedia Posted 1 hour ago Share Posted 1 hour ago The following product has been released on the IK Product Manager: TONEX v1.8.1 (for Mac/PC) This is a technical update, here is what’s new in version 1.8.1: TONEX Pedal firmware 1.5.13 (updated TONEX software, and then you can update your TONEX Pedal firmware from there) Fixed an issue that could cause the Global BPM to change while switching presets. Tone Model Advanced Search feature now available on ToneNET . Fixed an issue with Windows installer . General reliability improvements. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now