AZController Preset for Novation Launch Control XLII ver.3 now works with only the first Controller Preset

[Heinz Hupfer]

HI:)

In Version 2 it needed 4 User Presets of the Launch Control, I changed this now to use only the first User Preset of the 

Launch Control.

Most of it is the same as in Version 2:

Important for not to reset Controller when playback stop. In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import LaunchControlXL.ins (Download from OneDrive Link) Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled.

https://www.azslow.com/index.php?topic=662.msg4055#msg4055

Always the newest Files: 

https://1drv.ms/f/s!Al2mKojzOW0Mv_5Qh3Qya0iZ1i8qdA?e=WthVcu

I use Userpresets 1 LaunchControl XL MK II (Novation-2.0-LC_Preset 1.syx) and newest Preset „LCXL2-Final ver3-(*Date*).spp“ for AZControl 0.5r11b424 (newest release)

SHIFT, CTRL, DOUBLE_PRESS and LONG_PRESS Buttons for additional possibilities

GainAccess Mode:

All "Normal" Parameter, Gain, Pan, Volume, Send 1-6, Send 1-6 Pan, Solo, Mute, Inp. Echo, Phase, Auto.Write, Rec Arm.

Normal Mode: 

Moving to Bars, Markers, Sections, Next/Previous 8/1 Track(s), Zoom (Hor/Ver), Snap Settings on Rotor , Note Length on Rotor, Prev/Next TAB, Loop On/Off. Goto From, Select Active Track, Select None, Exit Cakewalk, Do Nothing (for some Rotors and Sliders), Open Control Bar/Multidock, Fit Project Ver/Hor, Select Clips Left/Right, Move Data Cursor Left/Right, with Shift Up/Down, Select in Timeline (snap), Narrow/Widen Selection, Move Selection, Zoom In on Selection, Audio Selection +- 2 dB(more to come)

Record Mode:
Same as in Normal Mode plus some Record specific commands and functions.

Level Mode:
    Shows Level of selected Clip or Track on the Buttons (Green, Yellow, Red over -2 dB, Gain, Pan, Volume WAI Track 1 - 8, Move to Next/Previous Bar/Marker/Section, Select Clip Left/Right/Up/down, Zoom Ver/Hor, goto From/Thru, Select From/To Now Time, Reset WAI to Track 1/57, Loop On/Off, Set Loop to Selection, Show Arranger, Play Selection, Select Clip Left/Right/Up/Down on Buttons, Solo Selected Track, Select None, Selection +- 2 dB, CTRL+Z (Undo), Do nothing, Open Control Bar, Open Multidock, Fit Tracks Vertical, Fit Project, more to come……

Pro Channel 1 Track Mode:
    All Pro Channel Standard Parameter on Rotors, Sliders and Buttons! (See 1-TrPCMode.docx)

Pro Channel 8 Track Mode:
All Pro Channel Standard Parameter of 8 Tracks simultaniously, Bank 1 Bass, Bank 2 LoMid Parameter, Bank 3 HiMid Parameter and Bank 4 Hi Parameter for 8 Tracks, for sure not to forget Compressor, Tube and Console Emulation 8 Tracks.

ACT Mode (Synth and Plugins):
     96 Rotors, 32 Sliders and 64 Buttons for ACT, more with Shift on 4 Banks.

24 Track Mode:
    24 Tracks Volume on Rotors, 24 Tracks Pan on Rotors with Shift, 8 Tracks WAI Bus Volume on Sliders and 8 Track Pan on Sliders, Mute and Solo for 8 WAI Buses.

Piano Roll View Mode (Inline):   

Snap Settings on Rotor, Note Length on Rotor, Zoom Hor at Now Time, Zoom Ver at Now Time, Zoom Ver/Hor at Data Cursor, Next/Prev Marker/Bar, Select Left/right, Move Data Cursor Left/Right/Up/down, Open PRV, Length of selected Note(s) +- 10 Ticks (Repeat of Key will come), Nudge Left/Right/Up/Down selected Note(s), Nudge Octave Up/down of selected Note(s), Next/Prev Note select,Note Velocity +- 1/5, Toggle Edit View, Do nothing, Snap to/By….more to come…

Extended Keyboard Edit:
    Snap Settings on Rotor, Note Length on Rotor, Buttons „1“ Scroll/Zoom Mode, „3“    Select Mode, „9“ Edit Mode, Select None, „-„, „+“, „8“ Up, „Alt+8“, „Ctrl+8“, „4“ Left, „6“ Right, „2“ Down, „Alt+4“, „Alt+6“, „Alt+2“, „Ctrl+2“, „Ctrl+4“, „Ctrl+6“, „Ctrl+8“, Enable/disable Extended Edit Mode. Up/Down/Left/right on Rotor 23 and 24 for faster working….

Midi Mode:
    C1, C#1, D1, E1, F1, F#1, G1,G#1, A1, A#1, B1 and C2 on the Buttons for to record Midi…..(LEDs with different Colors)

Have fun;)

Bassman

 

 

Edited September 11 by Heinz Hupfer

[Heinz Hupfer]

HI:)

 

Newest File:

LCXL2-Final ver3-09-24-2024.spp

WAI Down and WAI Up Doublepress (Set WAI to Track/Bus) now works correctly in all Modes

Track Select Right (Shift Button) is ACT Mode on Double Press, Track Select Left (Ctrl Button) is now Reset All on Double Press. Deleted ACT2 Mode, Synths and FX are both opened in ACT Mode!

A few Bug Fixes on LEDs and Modes, especially Double Press Ctrl Button! Now it accidentically not opens PRV Mode anymore on exit ACT Mode!

A lot of AZ Display Fixes. Other Bug Fixes.  

In Gain Access Mode Rotors 17-24 are now Send 1 Volume WAI 1-8.

https://1drv.ms/f/s!Al2mKojzOW0Mv_5Qh3Qya0iZ1i8qdA?e=wJ8TeL

 

Heinz.

 

Edited September 24 by Heinz Hupfer