AZController Preset for Novation Launch Control XLII ver.3 now works with only the first Controller Preset

[Heinz Hupfer]

HI:)

In Version 2 it needed 4 User Presets of the Launch Control, I changed this now to use only the first User Preset of the 

Launch Control.

Most of it is the same as in Version 2:

Important for not to reset Controller when playback stop. In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import LaunchControlXL.ins (Download from OneDrive Link) Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled.

https://www.azslow.com/index.php?topic=662.msg4055#msg4055

Always the newest Files: 

https://1drv.ms/f/s!Al2mKojzOW0Mv_5Qh3Qya0iZ1i8qdA?e=WthVcu

I use Userpresets 1 LaunchControl XL MK II (Novation-2.0-LC_Preset 1.syx) and newest Preset „LCXL2-Final ver3-(*Date*).spp“ for AZControl 0.5r11b424 (newest release)

SHIFT, CTRL, DOUBLE_PRESS and LONG_PRESS Buttons for additional possibilities

GainAccess Mode:

All "Normal" Parameter, Gain, Pan, Volume, Send 1-6, Send 1-6 Pan, Solo, Mute, Inp. Echo, Phase, Auto.Write, Rec Arm.

Normal Mode: 

Moving to Bars, Markers, Sections, Next/Previous 8/1 Track(s), Zoom (Hor/Ver), Snap Settings on Rotor , Note Length on Rotor, Prev/Next TAB, Loop On/Off. Goto From, Select Active Track, Select None, Exit Cakewalk, Do Nothing (for some Rotors and Sliders), Open Control Bar/Multidock, Fit Project Ver/Hor, Select Clips Left/Right, Move Data Cursor Left/Right, with Shift Up/Down, Select in Timeline (snap), Narrow/Widen Selection, Move Selection, Zoom In on Selection, Audio Selection +- 2 dB(more to come)

Record Mode:
Same as in Normal Mode plus some Record specific commands and functions.

Level Mode:
    Shows Level of selected Clip or Track on the Buttons (Green, Yellow, Red over -2 dB, Gain, Pan, Volume WAI Track 1 - 8, Move to Next/Previous Bar/Marker/Section, Select Clip Left/Right/Up/down, Zoom Ver/Hor, goto From/Thru, Select From/To Now Time, Reset WAI to Track 1/57, Loop On/Off, Set Loop to Selection, Show Arranger, Play Selection, Select Clip Left/Right/Up/Down on Buttons, Solo Selected Track, Select None, Selection +- 2 dB, CTRL+Z (Undo), Do nothing, Open Control Bar, Open Multidock, Fit Tracks Vertical, Fit Project, more to come……

Pro Channel 1 Track Mode:
    All Pro Channel Standard Parameter on Rotors, Sliders and Buttons! (See 1-TrPCMode.docx)

Pro Channel 8 Track Mode:
All Pro Channel Standard Parameter of 8 Tracks simultaniously, Bank 1 Bass, Bank 2 LoMid Parameter, Bank 3 HiMid Parameter and Bank 4 Hi Parameter for 8 Tracks, for sure not to forget Compressor, Tube and Console Emulation 8 Tracks.

ACT Mode (Synth and Plugins):
     96 Rotors, 32 Sliders and 64 Buttons for ACT, more with Shift on 4 Banks.

24 Track Mode:
    24 Tracks Volume on Rotors, 24 Tracks Pan on Rotors with Shift, 8 Tracks WAI Bus Volume on Sliders and 8 Track Pan on Sliders, Mute and Solo for 8 WAI Buses.

Piano Roll View Mode (Inline):   

Snap Settings on Rotor, Note Length on Rotor, Zoom Hor at Now Time, Zoom Ver at Now Time, Zoom Ver/Hor at Data Cursor, Next/Prev Marker/Bar, Select Left/right, Move Data Cursor Left/Right/Up/down, Open PRV, Length of selected Note(s) +- 10 Ticks (Repeat of Key will come), Nudge Left/Right/Up/Down selected Note(s), Nudge Octave Up/down of selected Note(s), Next/Prev Note select,Note Velocity +- 1/5, Toggle Edit View, Do nothing, Snap to/By….more to come…

Extended Keyboard Edit:
    Snap Settings on Rotor, Note Length on Rotor, Buttons „1“ Scroll/Zoom Mode, „3“    Select Mode, „9“ Edit Mode, Select None, „-„, „+“, „8“ Up, „Alt+8“, „Ctrl+8“, „4“ Left, „6“ Right, „2“ Down, „Alt+4“, „Alt+6“, „Alt+2“, „Ctrl+2“, „Ctrl+4“, „Ctrl+6“, „Ctrl+8“, Enable/disable Extended Edit Mode. Up/Down/Left/right on Rotor 23 and 24 for faster working….

Midi Mode:
    C1, C#1, D1, E1, F1, F#1, G1,G#1, A1, A#1, B1 and C2 on the Buttons for to record Midi…..(LEDs with different Colors)

Have fun;)

Bassman

 

 

Edited September 11 by Heinz Hupfer